Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Oasis 96mm oil rubbed bronze pull is a zinc cabinet handle designed for projects that call for a 3-3/4 inch center to center layout, so it drops straight onto standard drill patterns in many base and wall cabinets. The Oasis Series identity ties this pull to the Berenson decorative hardware family, which helps keep a consistent look across a run of doors and drawers on the same job. The oil rubbed bronze finish provides a dark, traditional tone that works where a warmer metal color is preferred over bright finishes. A total length of 4-7/8 inches gives installers and users a solid gripping area while still fitting on narrower drawer fronts. A projection of 1-1/8 inches sets the hand clearance off the cabinet face, which helps users get a comfortable hold during everyday use.
The 3-3/4 inch center to center measurement defines the hole spacing for this Oasis pull, so drilling can be laid out precisely when setting up new cabinet doors or drawer fronts. An overall length of 4-7/8 inches means the pull extends slightly beyond the hole spread at each end, which helps visually balance the hardware on the face. A width of 13/16 inch provides a substantial feel in the hand while still leaving room around the pull on narrower rails. The 1-1/8 inch projection dimension establishes how far the pull stands off the surface, which is important for finger clearance in front of door styles and drawer fronts.
This Berenson Oasis Series pull, identified as 9245-1ORB-P, is part of the Handles and Pulls category, so it is suited to cabinet doors and drawers in built-ins or furniture-grade work. The 96 mm, or 3-3/4 inch, center to center spacing lines up with a widely used pattern, which fits applications where a consistent handle layout runs across multiple cabinets in a kitchen, bath, or shop installation. The oil rubbed bronze finish on this pull sets a dark, warm tone, which works well on many stained woods where a deeper metal color is preferred over lighter finishes. Because the pull body is zinc, it provides a solid-feeling component, which suits cabinets that see frequent opening cycles over time.
The clearly defined 3-3/4 inch center to center dimension on this Oasis pull supports repeatable drilling, which helps installers keep hardware aligned across doors and drawers on a job. The specified overall length of 4-7/8 inches means each pull covers a bit of face area beyond the hole spacing, which can visually anchor the hardware line on wider fronts. A width of 13/16 inch gives a comfortable contact surface for fingers, which supports steady pulling force when operating heavier drawers or tall doors. The 1-1/8 inch projection figure defines stand-off from the cabinet face, which helps reduce knuckle contact with door profiles when the pull is used repeatedly throughout the day. The 11/16 inch base diameter at each end brings a defined footprint to the contact points, which can help create a tidy, finished look where the pull meets the cabinet surface.
The Berenson Oasis Series pull has a 3-3/4 inch, or 96 mm, center to center dimension, which sets the hole spacing used when laying out cabinet doors or drawers.
The Oasis 9245-1ORB-P pull is made from zinc, which gives the handle a solid metal body suited to repeated cabinet use.
This Oasis Series cabinet pull has an oil rubbed bronze finish, which provides a dark, traditional appearance on doors and drawers.
The Berenson Oasis pull has a projection of 1-1/8 inches, which sets the clearance for fingers between the handle and the cabinet surface.
The overall length of this Oasis 96mm pull is 4-7/8 inches, which provides a comfortable gripping span across cabinet doors and drawers.
The Berenson Oasis Series pull has a width of 13/16 inch, giving users a stable surface to grip when opening or closing cabinets.
This Berenson Oasis Series 3-3/4 inch center to center pull combines a zinc body with an oil rubbed bronze finish, which suits projects needing sturdy cabinet hardware in a darker tone. The 96 mm center to center spacing, 4-7/8 inch overall length, and 1-1/8 inch projection give clear layout and clearance dimensions, which supports consistent handle placement across cabinets. For jobs calling for Handles and Pulls in this style and size, this 9245-1ORB-P pull from Wurth Baer Supply aligns with a 96 mm cabinet drill pattern.
Sold In: 1 Each
