Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Oasis pull 128mm center to center describes a Berenson Oasis Series cabinet handle designed around a precise 5-1/16 inch mounting span, so drawers and doors drilled to this common size accept it without layout changes. The pull uses zinc die cast construction, which forms a rigid body that holds its shape on frequently used fronts. Its brushed nickel finish diffuses reflections along the 6-1/16 inch overall length, helping new and existing faces share a consistent look. A projection of 1-1/16 inch sets the gripping surface off the door enough for fingers to wrap around comfortably during daily use. With a width of 13/16 inch, the pull presents a substantial face for the hand, while still fitting well on standard cabinet rails and drawer fronts. Base dimensions of 11/16 inch at each end give a defined footprint that covers typical bore margins.
This Berenson Oasis pull centers around a 5-1/16 inch center to center pattern, which is the same as 128 mm, so metric cabinet drilling templates align directly to the mounting posts. The 6-1/16 inch overall length means the pull extends slightly beyond the hole spread at each end, giving enough edge reveal for a finished look on face frames and slab fronts. With a projection of 1-1/16 inch, the handle stands off the surface at a consistent depth, helping rows of doors and drawers present a uniform profile. A 13/16 inch width establishes the main gripping bar size, pairing well with standard cabinet stile and rail dimensions. The 11/16 inch base dimensions keep each mounting pad compact, which suits narrow rails, while still providing a stable footprint against the door or drawer front.
The Berenson Oasis Series 9249-1BPN-P pull functions as a cabinet and drawer handle wherever a 5-1/16 inch center to center bore is present, so it works along both new and existing drilling patterns built on the 128 mm standard. Its zinc die cast material supports use on kitchen, bath, or shop cabinetry where metal hardware is expected. The brushed nickel finish lets this pull coordinate with other brushed nickel decorative hardware and moldings, helping runs of doors and drawers read as a single system. At 6-1/16 inch overall length, the piece spans a useful portion of typical drawer fronts, giving an easy grab point near the center of the panel. The 1-1/16 inch projection creates a practical gap between hand and surface, which is especially helpful on deeper drawers that see frequent loading and unloading.
The 5-1/16 inch (128 mm) center to center dimension on this Oasis pull fixes the mounting pattern, so multiple handles line up cleanly when repeated across wide cabinet runs. Matching metric and imperial references simplify layout when mixing jigs or drawings that specify either unit. The 13/16 inch width and 11/16 inch base dimensions control how the pull seats on the door or drawer, which helps edges align parallel to the panel and keeps the footprint tight but stable. Zinc die cast construction gives the handle a defined shape that maintains its profile after repeated use. The brushed nickel finish diffuses light along the pull body, which can reduce harsh glare on long banks of cabinets while complementing other brushed metal hardware. Together, these dimensions and materials support repeatable installations that look uniform from cabinet to cabinet.
The Berenson Oasis pull uses a 5-1/16 inch center to center dimension, matching the 128 mm standard, so it aligns with common cabinet drilling layouts.
The 9249-1BPN-P Oasis cabinet pull has a 6-1/16 inch overall length, giving some extension beyond the mounting holes for a finished appearance on doors and drawers.
The Berenson Oasis Series pull is made from zinc die cast, which forms a solid metal body suited to regular cabinet and drawer use.
This brushed nickel Oasis pull has a 1-1/16 inch projection, setting the grip off the surface to provide finger clearance during everyday operation.
The Oasis zinc die cast drawer pull is 13/16 inch wide, giving a comfortable gripping surface while remaining proportional to standard cabinet rails.
The Berenson Oasis pull has 11/16 inch base dimensions at each end, defining a compact mounting footprint on doors and drawer fronts.
The Oasis pull 128mm center to center pattern, 6-1/16 inch overall length, and 1-1/16 inch projection give clear sizing for planning cabinet hardware layouts. The brushed nickel zinc die cast construction from Berenson Corporation matches the Oasis collection, so runs of fronts share the same material and finish. Using the 9249-1BPN-P part number when ordering through Wurth Baer Supply ties specifications directly to this handle, helping cabinet, millwork, and shop projects repeat the same look and mounting pattern across multiple installs.
Sold In: 1 Each
