Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Oasis brushed tin pull gives cabinets and drawers a defined 5-1/16 inch center to center grip, creating a consistent handle layout across a run of doors and fronts. The Oasis series zinc die cast construction provides a solid pull body, supporting repeated use in busy residential or light commercial spaces. A brushed tin finish delivers a muted metallic look, helping this pull coordinate with other brushed fixtures on the same project. The 6-1/16 inch overall length establishes a visible handle span, which helps align multiple pulls along wider drawer fronts. A projection of 1-1/16 inch sets the hand clearance off the face, giving fingers room to grab while keeping the pull close for a compact profile. The 13/16 inch width offers a comfortable edge for the hand, helping reduce pinch points when operating heavier drawers. Base dimensions of 11/16 inch at each end define the footprint where the pull meets the cabinet surface.
The 128 mm center to center measurement on this Oasis series pull sets the exact distance between mounting points, guiding bit placement when drilling new fronts. The same 5-1/16 inch hole spacing also supports straightforward change-outs on cabinets already bored to that standard spread. With a 6-1/16 inch overall length, the pull extends slightly beyond the hole centers, letting installers center the handle visually on rail and stile constructions. A 1-1/16 inch projection defines the standoff from the door or drawer face, which helps plan clearances near adjacent walls or tall cabinet sides. The 13/16 inch width and 11/16 inch base dimensions help layout pulls so the ends sit fully on flat rail sections rather than drifting into profiled edges.
The Berenson Oasis series 5-1/16 inch center to center brushed tin pull fits projects calling for a defined 128 mm mounting pattern, such as kitchen cabinets, bathroom vanities, or casework built around metric drilling jigs. Its 6-1/16 inch length scales well on standard wall cabinet doors and typical drawer fronts, giving a noticeable handle without dominating narrow faces. The brushed tin finish provides a soft metallic tone that pairs with similarly brushed hinges, faucets, or appliances on coordinated jobs. Zinc die cast construction gives this pull a consistent shape, supporting repeated use across full-room layouts where matching hardware is required. The 1-1/16 inch projection and 13/16 inch width balance grip comfort and compact depth, fitting spaces where fronts open near adjacent panels or appliances. Base dimensions of 11/16 inch at each end keep the contact area tight, helping the pull seat properly on flat frame sections or slab doors.
The 5-1/16 inch (128 mm) center to center spacing allows installers to use common drilling templates and boring patterns, which supports efficient layout across large cabinet runs. Matching that measurement also matters when updating hardware on existing fronts already drilled at 128 mm, because the Berenson 9250-10BT-P pull can align directly to those points. The overall 6-1/16 inch length helps center the hardware visually on typical face frame rails, improving sight lines when doors and drawers are closed. A 1-1/16 inch projection keeps the hand away from the cabinet surface during operation, reducing contact with finished faces during frequent opening and closing. The 13/16 inch width creates a substantial gripping surface, which assists on wider or heavier drawers that need more pulling force. With zinc die cast material, each pull maintains uniform dimensions, supporting consistent reveals and alignment when multiple pieces are installed across a full kitchen, bath, or built-in project.
The Berenson 9250-10BT-P pull has a 5-1/16 inch center to center, 6-1/16 inch overall length, 1-1/16 inch projection, 13/16 inch width, and 11/16 inch base dimensions for layout and grip planning.
The 128 mm center to center spacing matches a common drilling pattern, so holes can follow standard templates or existing 5-1/16 inch layouts during cabinet hardware work.
The Oasis series 9250-10BT-P pull is zinc die cast, providing a solid, uniform handle body that supports consistent feel across multiple installed pulls.
This Oasis cabinet pull uses a brushed tin finish, giving a muted metallic appearance that coordinates with other brushed metal components on a project.
The 6-1/16 inch length suits standard cabinet doors and typical drawer fronts, creating a visible handle size that aligns well across repeated fronts.
The 1-1/16 inch projection sets the pull away from the door or drawer, giving fingers clearance to grab while keeping the hardware profile relatively compact.
The Oasis 128 mm center to center pull from Berenson Corporation provides defined measurements for layout-driven cabinet work. With a 5-1/16 inch center to center spread, 6-1/16 inch overall length, and 1-1/16 inch projection, it supports consistent hardware alignment across doors and drawers. Zinc die cast construction and a brushed tin finish tie the handle body and appearance together for coordinated rooms. For projects built around 128 mm drilling patterns and a brushed metallic look, this Oasis series pull offers a matched hardware option ready for repeatable installation.
Sold In: 1 Each
