Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Oasis cabinet pull is a zinc die cast handle in the Oasis collection, so it delivers a consistent look when you are matching hardware across a project. The brushed tin finish offers a muted metal appearance, which helps the pull blend into both light and dark cabinet finishes without glare. A center to center dimension of 6-5/16 inches (160 mm) sets the mounting hole spacing, which matters when you are drilling new fronts or lining up with existing bores on replacement jobs. Overall length of 7-5/16 inches gives fingers room to grab from different angles, useful on wider drawers and taller doors. A projection of 1-1/16 inches stands the pull off the front, providing clearance for fingers so doors can be opened without scraping knuckles. Width of 13/16 inch and base dimensions of 11/16 inch at each end create a stable footprint, helping the pull sit visually balanced on face frames or frameless fronts.
The 6-5/16 inch center to center measurement on the Berenson Oasis Series pull establishes the exact drilling distance between mounting points, which is critical when laying out new cabinet doors or replacing an existing handle on a finished panel. The pull length of 7-5/16 inches means the ends will extend slightly past the holes, helping cover minor layout variations along a run of doors. With a projection of 1-1/16 inches, the pull stands off the cabinet enough that fingers can wrap behind it, supporting smooth operation on heavier drawers. The 13/16 inch width combined with 11/16 inch base dimensions sets how much face area the pull visually covers, which helps with centering on narrow rails or aligning along the top of drawer fronts.
The Oasis pull with 160 mm center to center spacing works on cabinet doors and drawers that are sized to accommodate its 7-5/16 inch length, giving a balanced appearance on medium to large fronts. The brushed tin finish coordinates with other brushed metals, so it fits into kitchens, baths, and shop cabinets that use similar hinge or faucet finishes. Zinc die cast construction supports repeated pulling on frequently used doors, making this handle suitable for active areas where cabinets are opened throughout the day. The 13/16 inch width, combined with 11/16 inch base dimensions, helps the pull look proportionate on standard stile and rail widths, so it can be aligned vertically or horizontally depending on layout. A projection of 1-1/16 inches allows the pull to be placed near edges while still leaving finger room between the handle and door surface for comfortable operation.
The 6-5/16 inch (160 mm) center to center value on the 9253-10BT-P brushed tin pull gives a precise measurement for drilling jigs, which supports consistent hardware spacing from one cabinet front to the next. Because the overall length is 7-5/16 inches, the pull overlaps the mounting points enough to help visually smooth small drilling variations along a bank of drawers. The zinc die cast material used for the Oasis pull maintains a uniform shape at each end, which helps the 11/16 inch base dimensions register evenly against the surface for a squared appearance. The 13/16 inch width provides a defined edge line, aiding alignment with door profiles or drawer reveals. With a projection of 1-1/16 inches, the distance from the cabinet face to the grip remains predictable, so users experience the same hand clearance whether the pull is mounted vertically on doors or horizontally on drawers.
The Berenson Oasis Series pull has a 6-5/16 inch (160 mm) center to center measurement, setting the screw hole spacing for consistent drilling on cabinet doors and drawers.
The 9253-10BT-P brushed tin pull is 7-5/16 inches long, so it spans a useful width on medium and large cabinet fronts while covering the mounting holes cleanly.
The Oasis 160mm cabinet pull is zinc die cast, which provides a solid metal feel and consistent casting shape for uniform appearance across multiple cabinets.
This Berenson Oasis cabinet pull has a brushed tin finish, giving a muted metallic look that works with many cabinet colors and brushed metal components.
The Oasis pull projects 1-1/16 inches from the cabinet surface, creating working space behind the handle for fingers to grip doors and drawers comfortably.
This handle has a 13/16 inch width and 11/16 inch base dimensions, creating a stable footprint that looks proportionate on typical cabinet rails and drawer fronts.
The Berenson Oasis Series 6-5/16 inch center to center brushed tin pull gives clear working dimensions for planning cabinet hardware layouts on new or existing fronts. The zinc die cast construction, 7-5/16 inch overall length, and 1-1/16 inch projection combine to create a handle that fits common cabinet door and drawer sizes. With its brushed tin finish and defined 13/16 inch width, this pull provides a consistent, repeatable look across multiple openings. For projects that use 160 mm center to center spacing, this Oasis pull aligns hole drilling with a specific, documented size so runs of cabinets can share the same handle style and measurements.
Sold In: 1 Each
