CompX Timberline Deadbolt Lock, 3/4" Cylinder with 3/32" Setback, Type 231 Cylinder Body - CB231

CompX Timberline Deadbolt Lock For 3/4 Inch

CompX Timberline deadbolt lock is a Type 231 cylinder body that provides keyed locking for cabinet doors or drawers built from 3/4 inch material. The 3/4 inch material rating aligns this lock body with common cabinet construction, so it drops into standard thickness layouts without reworking panels. The lock uses a 3/32 inch setback on the cylinder, positioning the plug in front hardware layouts where the face of the cylinder must sit slightly back from the front surface. This Type 231 cylinder body is identified as CB-231, which ties directly to CompX Timberline lock planning and matching parts. A deadbolt design secures the door or drawer with a projecting bolt, giving a positive lock action. The black nylon housing surrounds the mechanism, providing a durable body that also presents a dark, low-profile look at the mounting location.

Key Deadbolt Details That Support Cabinet Work

• The deadbolt is 1-3/8 inch in length from the center point of the lock cylinder in the unlocked position, so you can lay out strike locations with a known reach from the cylinder centerline.
• The deadbolt provides 1/2 inch of deadbolt throw, giving a defined engagement distance into the strike area that helps set up reliable locking of doors and drawers.
• Horizontal mount operation lets the lock body sit in line with the edge of the door or drawer, which fits common cabinet and furniture layouts using side-mounted deadbolt hardware.
• The black nylon housing is described as durable and attractive, so the lock body stands up as a working component while giving a clean, finished appearance around the cylinder area.
• This CompX Timberline deadbolt lock is specified for door or drawer locking in cabinetry, furniture, desks, and lockers, so one cylinder body style can serve multiple interior projects.

Mounting And Rotation Details For Installation

This CompX Timberline deadbolt lock uses horizontal mount, so the body runs parallel with the door or drawer edge during installation. That orientation works with standard edge-boring and mortising setups for side-mounted locking points. Operation is defined as 180 degree rotation CCW, meaning the lock turns counterclockwise through a half turn from unlocked to locked. That rotation pattern guides how the cylinder plug should be clocked when installing the lock body so the key motion lines up with the intended locked and unlocked positions. The deadbolt length of 1-3/8 inch measured from the cylinder center in the unlocked state gives a fixed reference when setting the distance to the catch or strike point.

Using The CB-231 Cylinder Body In Cabinet Projects

Where This Type 231 Cylinder Body Is Applied

This Type 231 cylinder body, identified as CB-231, is described as a CompX Timberline deadbolt lock for 3/4 inch material thickness in door or drawer applications. That sizing targets typical cabinet carcasses, drawer fronts, and furniture doors built from 3/4 inch stock. The lock is specified for door or drawer locking in cabinetry, furniture, desks, and lockers, covering many interior storage points that benefit from keyed security. A deadbolt lock design serves locations where a solid projecting bolt is preferred over a spring latch, so the door or drawer stays positively locked until the cylinder is rotated. The horizontal mount layout lets the body sit along an edge, fitting side-mount conditions found in built-ins and casework.

Why Rotation, Throw, And Housing Matter In Use

The 180 degree rotation CCW operation defines exactly how the key motion drives the bolt, so installers can position the cylinder knowing that a half turn counterclockwise will move the deadbolt between locked and unlocked states. The deadbolt length of 1-3/8 inch from the center point of the lock cylinder in the unlocked position and the 1/2 inch of deadbolt throw together define both reach and travel, which supports consistent layout of strikes and mating parts across multiple doors or drawers. The lock is noted as having a durable and attractive black nylon housing, so the working body of the lock stands up as part of everyday furniture and cabinet use while maintaining a uniform dark appearance around the cylinder area. This deadbolt lock is also described with a 3/32 inch setback on the cylinder, giving a specific face position that helps align the cylinder with front surfaces and trim details in cabinetry projects.

Common Questions About The CB-231 Deadbolt Lock

Select This Lock Body For 3/4 Inch Projects

The CompX Timberline deadbolt lock Type 231 cylinder body CB-231 combines 3/4 inch material suitability with a defined 3/32 inch setback, 1-3/8 inch deadbolt length from the cylinder center, and 1/2 inch throw. These specifics let installers and builders plan cabinet, furniture, desk, and locker locks around known distances and rotation. For projects calling for a horizontal mount deadbolt lock with 180 degree CCW rotation and a black nylon housing, this cylinder body matches the described CompX Timberline layout and appearance.