Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
40 degree tip-out scissor hinge is a self-closing concealed scissors hinge designed for sink tip out tray applications. This hinge fits both traditional frame or frameless cabinets, so one model can serve mixed cabinet runs in the same job. The self-close action pulls the tray shut at the end of travel, which helps keep fronts aligned without constant adjustment. Because the hinge is concealed, the hardware stays out of sight when the tray is closed, supporting clean face lines on finished cabinetry. An internal stop controls opening to a defined angle, so the tray does not over-rotate during daily use. The hinge works within a 1mm minimum reveal at the top and bottom, which guides door and tray spacing during layout. Knape and Vogt branding and the SH-1-S/P part number identify this hinge as a consistent, repeatable choice across multiple installs.
The self-closing concealed scissors hinge is sized at 2-7/8 inches long, 1-7/8 inches deep, and 3-13/16 inches high, so installers can plan placement around interior clearances of the sink cabinet. Because it fits both traditional frame and frameless cabinets, it can be aligned to the face frame or cabinet sides using standard layout practices for tip-out trays. The 1mm minimum reveal at the top and bottom of the tray front dictates the needed gap, so setting this spacing during dry-fit helps the tray move without binding. With an internal stop controlling the 40 degree tip-out motion, the hinge defines the working arc, which simplifies aligning the tray front relative to the sink and countertop edge.
The Knape and Vogt self-closing concealed scissors hinge is built for sink tip out tray installations in kitchen and bath cabinetry. Its 40 degree tip-out function, identified in the SAP description, creates a defined opening angle that lets users access small items while keeping the tray front connected to the cabinet. Because the hinge is concealed, only the tray front shows when closed, which supports more finished-looking sink cabinets in higher-visibility areas. Fit for both traditional frame and frameless cabinets means this same hinge can be used behind different face conditions, such as framed sink bases and nearby frameless vanity cabinets in the same project. The 2-7/8 inch length, 1-7/8 inch depth, and 3-13/16 inch height dimensions allow planners to confirm there is room behind the false front area for the hinge body and tray when tipped in.
The self-close feature of this scissor hinge draws the tip-out tray back into position, which supports consistent alignment of the front with surrounding doors and drawer fronts. An internal stop in the hinge regulates the swing to an engineered 40 degree tip-out, so the tray does not open beyond its intended range during regular use. This controlled arc reduces the chance of the tray front contacting nearby fixtures, relying instead on the hinge mechanism to define end of travel. The 1mm minimum reveal at the top and bottom provides a firm spacing rule for layout, which helps reduce rework caused by fronts rubbing the countertop or rail when the tray closes. With the SH-1-S/P designation, installers and shops can match this performance across multiple cabinets and projects, supporting predictable behavior whenever a sink tip out tray is specified.
The self-closing concealed scissors hinge fits both traditional frame and frameless cabinets, so it can be used across different box constructions in the same installation.
The 40 degree tip-out scissor hinge uses an internal stop to control opening, providing a defined arc that keeps the tray within its intended operating range.
The Knape and Vogt Series SH-1-S/P hinge measures 2-7/8 inches long, 1-7/8 inches deep, and 3-13/16 inches high for planning space behind the tray front.
The self-closing concealed scissors hinge pulls the tray shut at the end of travel, helping the front return to a consistent position against the cabinet.
The 1mm minimum reveal top and bottom sets the required gap so the tray front can move freely without contacting adjacent cabinet parts when opening or closing.
This hinge is identified as Knape and Vogt Series SH-1-S/P, which provides a clear part reference when matching hardware on future cabinets.
The 40 degree tip-out scissor hinge pairs the SH-1-S/P part identity with self-closing concealed action, internal stop, and 1mm minimum reveal requirements, giving installers defined parameters for sink tip out trays. Fit for both traditional frame and frameless cabinets further broadens where it can be specified. When a job calls for a controlled 40 degree tip-out motion with consistent closing behavior, this Knape and Vogt hinge offers a clearly defined set of working characteristics to align cabinet layout and hardware selection.
Sold In: 1 Pair
