Omega National 32" D x 26"-32" H Maple Full Circle Lazy Susans, Independently Rotating 2 Shelves - T7432K01MNL1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NP1T7432K01MNL1 to RS1T7432K01MNL1.

32 Inch Maple Lazy Susan For Corner Cabinets

32 inch maple lazy susan from Omega National Products is a full circle, two-shelf system that creates a rotating storage surface inside a cabinet, so stored items stay reachable without digging through the back of the space. The shelves are built from 12mm thick multidirectional maple plywood, which provides a stable platform that resists warping as the shelves rotate under normal kitchen cabinet loads. Each shelf has a 1-1/2 inch high maple plywood rim on the outside edge, which helps keep containers and small items from sliding off the rotating surface during use. The system features independently rotating 2 shelves, meaning each shelf turns on its own, allowing access to one level without disturbing items on the other level. The Select Series maple construction uses no finger-joint maple plywood, giving each shelf a consistent surface that finishes cleanly in visible cabinet interiors.

Key Maple Lazy Susan Details For Cabinet Projects

• The 32 inch diameter shelves create a large circular storage area inside a compatible cabinet footprint, giving more usable surface compared to smaller turntables when there is space to support the full circle.
• Multidirectional maple plywood shelf construction in 12mm thickness gives the rotating surfaces strength across the panel, which matters where loads shift as the shelf is turned during daily use.
• The 1-1/2 inch high maple plywood rim on the outside of each shelf acts as a low barrier, helping keep taller bottles and stacked goods supported as the lazy susan rotates within the cabinet.
• The pre-catalyzed UV-cured clear coat finish on the maple shelves creates a sealed surface that resists normal cabinet wear, so containers slide smoothly without catching fibers in the wood ply.
• The independently rotating 2 shelves let an installer position items by level, since the top and bottom shelves can be turned separately to bring specific groups of products to the front of the opening.

Telescoping Shaft And Shelf Height Range Details

The two shelf set uses a telescoping shaft that adjusts from 26 inches to 32 inches in height, which lets the installer match the assembly to a range of interior cabinet heights within that span. A 1 inch diameter chrome plated shaft system supports the rotating shelves, providing a central column around which the shelves turn during operation. The chrome plated finish on the shaft gives a smooth surface for rotation components that interface with the shaft, which helps the system turn consistently under normal use. By matching the shaft adjustment range with the 32 inch diameter shelves, this Select Series configuration fits tall cabinet interiors that benefit from two independently rotating tiers.

Using This Omega National Maple Lazy Susan In Projects

Where This 32 Inch Full Circle Lazy Susan Fits

This Omega National maple full circle lazy susan with 32 inch diameter shelves serves kitchen and bath cabinet interiors where a round rotating surface is desired for storage. The 26 to 32 inch telescoping shaft range suits cabinet openings tall enough to stack two shelves while keeping working space between them for typical pantry items. In corner or deep base cabinets, the full circle shape lets the shelves sweep stored items completely around the interior, so the user can bring items at the back toward the opening by rotation. The 1-1/2 inch high rim around each shelf supports cans, jars, and similar products as they move, which is useful in cabinets that experience frequent opening and closing.

Details That Support Consistent Rotation And Finish

The independently rotating 2 shelves allow motion at each level without transferring that motion to the other level, which helps keep organized zones intact on the shelf that is not being turned. The 12mm thick multidirectional maple plywood used in the shelves offers strength in multiple directions of the panel, supporting loads as the shelf rotates so the surface remains solid under typical cabinet storage. The use of no finger-joint maple plywood in the Select Series creates continuous veneer faces, which presents a cleaner appearance in open or glass-door cabinets where the shelf edges may be visible. The pre-catalyzed UV-cured clear coat finish on the shelves forms a hard, clear surface over the maple, so containers glide over the surface with less friction while the wood below is protected from direct contact. The 1 inch diameter chrome plated shaft system gives a rigid, central axis for both shelves, which contributes to a smooth rotating action and helps the assembly stay aligned through repeated use inside the cabinet.

Common Questions About This Maple Lazy Susan

Select This Maple Lazy Susan For Rotating Storage

The Omega National 32 inch maple full circle lazy susan with independently rotating 2 shelves offers a two-level rotating storage surface for cabinet interiors using a 26 to 32 inch telescoping shaft. The 12mm multidirectional maple plywood shelves with 1-1/2 inch high rims and pre-catalyzed UV-cured clear coat finish provide a stable, finished maple surface ready for everyday cabinet storage needs. The 1 inch diameter chrome plated shaft system centers the assembly and supports smooth shelf rotation in service. For projects matching this height range and diameter, the T7432K01MNL1 configuration delivers a defined maple lazy susan solution.