
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf pantry pull-out gives you organized vertical storage in a cabinet opening sized for an 11 inch wide by 43 inch high unit. This pantry pull-out organizer from Rev-A-Shelf is part of the 448-TP Series and is built from maple with adjustable shelves for flexible storage. The soft close pantry pull-out rides on a gas assisted soft-close slide system and includes door mount brackets, a telescoping rear wall, and mounting hardware. Buyers looking for a pantry cabinet organizer can use this unit to improve access to stored goods while keeping shelf positions adjustable. For installers searching rev a shelf or revashelf pantry options, this model is shipped ready to assemble and is designed with system holes drilled for shelf adjustment.
Key specs to confirm: This pantry pull-out organizer is identified as Rev-A-Shelf model 448-TP43-11-1 and is described as 11 inches wide by 43 inches high. Buyers should confirm cabinet opening dimensions, interior depth, door mounting method, and face frame conditions before ordering. Product data notes rub bushings for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frames, which is important for fit planning. The slide is listed as 450 lb rated, and the product is described as CARB II compliant. If you need exact assembled depth, shelf count, or detailed clearance requirements, confirm those points with manufacturer technical documentation before purchase.
What's included: Verified included items are adjustable shelves, door mount brackets, a telescoping rear wall, a 450 lb rated gas assisted soft-close slide, rub bushing, and mounting hardware. The unit is shipped ready to assemble.
What to verify before ordering: Confirm your cabinet opening can accept an 11 inch wide by 43 inch high pantry pull-out, check face frame thickness, verify door attachment needs, review interior depth and swing clearance, and confirm whether the phased-out 448-TP Series or the replacement 448-TPF Series is the correct path for your project if stock is limited.
A pantry pull-out organizer like this one is commonly chosen when a buyer wants better access to food storage in a tall cabinet and does not want fixed shelves buried behind a single door. The Rev-A-Shelf pantry pull-out uses adjustable shelves, so it can be set up for different package heights instead of forcing every item into one shelf spacing. That matters in kitchens where dry goods, bottles, containers, and boxed items all compete for the same cabinet space.
For a professional installer, the door mount pantry pull-out format can help create a more integrated result because the cabinet door moves with the organizer. Product data also notes patented door mount brackets with micro-adjustment, which is useful when aligning the door after installation. The soft close pantry pull-out design adds a controlled closing action through a gas assisted slide system. That can be helpful in busy kitchens where a tall organizer is opened and closed often.
This maple pantry pull-out is also relevant when the buyer wants a wood organizer rather than a wire unit. The maple construction and system holes drilled for shelf adjustment support future changes if storage needs shift over time. The telescoping rear wall is another verified design element that supports assembly and fit within the organizer system.
For fit, buyers should not assume that width and height alone tell the full story. A pantry cabinet organizer also depends on cabinet depth, usable interior opening, face frame details, and door mounting conditions. Product data specifically references rub bushings for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frames, so those dimensions should be checked carefully. If exact clearance requirements or assembled depth are critical on your job, confirm them before ordering rather than estimating from the series name.
When buyers compare pantry pull-out organizer options, the most useful differences are usually material, adjustability, closing action, mounting method, and included hardware. This Rev-A-Shelf unit gives verified details in each of those areas. It is made of maple, it includes adjustable shelves, and it uses a gas assisted soft-close slide. It also includes door mount brackets, mounting hardware, and a telescoping rear wall, which helps buyers understand what comes with the assembly.
Another point buyers often compare is how much installation adjustment is built into the organizer. This model includes micro-adjustment at the door mount brackets and product data mentions tilt adjustment and adjustment screws to center the pantry pull-out. Those details matter because tall pull-outs need careful alignment to operate cleanly and present evenly with the cabinet door. A product with built-in adjustment can reduce trial-and-error during final fitting.
It is also worth noting that Rev-A-Shelf is phasing out the 448-TP Series, with the 448-TPF Series listed as the replacement when stock is unavailable. For buyers managing a repair, matching an existing installation, or planning a multi-cabinet project, that phase-out note is important. If consistency across several cabinets matters, confirm current availability and whether your project should stay with this exact model or move to the replacement series.
For trust and planning, this product page should be used as a verified summary of what is stated in product data: dimensions of 11 inches wide by 43 inches high, maple construction, adjustable shelves, soft-close slide hardware, and included mounting components. For any missing dimension, clearance, or installation condition not stated here, the safest next step is to verify against manufacturer instructions before cutting, drilling, or ordering multiple units.
This pantry pull-out is listed as 11 inches wide by 43 inches high, but cabinet depth, interior opening, and face frame details must also be confirmed.
The Rev-A-Shelf pantry pull-out includes a gas assisted soft-close slide and mounting hardware.
The pantry pull-out organizer has adjustable shelves and system holes drilled for shelf adjustment.
The unit includes door mount brackets with micro-adjustment, so door mounting is part of the verified design.
The product data references rub bushings for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frames.
This pantry cabinet organizer is shipped ready to assemble, not described as pre-assembled.
RS448-TP43-11-1 includes adjustable shelves, door mount brackets, a telescoping rear wall, slide hardware, rub bushing, and mounting hardware.
The slide is listed as 450 lb rated and the product is described as CARB II compliant. Follow manufacturer installation guidance and local building requirements where applicable.
The 448-TP Series is being phased out, and product data says the replacement products are in the 448-TPF Series if stock is unavailable.
RS448-TP43-11-1 is a model-specific way to order this Rev-A-Shelf pantry pull-out when you need an 11 inch wide by 43 inch high organizer with adjustable shelves and soft-close slide hardware. Before purchase, confirm cabinet opening size, depth, face frame conditions, and door mounting needs. Verified included components cover the core organizer parts and mounting hardware, while the unit ships ready to assemble. If your project depends on exact clearance details or current series availability, confirm those points before placing the order.
Sold In: 1 Each