Steel table legs, 27-3/4 to 28-3/4 in, chrome

Steel Table Legs For Adjustable Work Surfaces

Steel table legs from Camar in the Slim Series provide a straightforward way to support tables and work surfaces using a fixed-height leg with built-in adjustment, so installers can dial in final height on site without reworking the top. Each leg has a 1-3/8 inch diameter, which gives a compact footprint while still supporting substantial loads, useful when you need strength without a bulky look under the top. The stated table height of 27-3/4 inches to 28-3/4 inches means the leg and foot combine to form a standard sitting-height work surface, giving consistent ergonomics across multiple installations. A load bearing capacity of 220 lbs per leg allows one leg to handle significant weight, so a typical four-leg table layout can support heavy workpieces or equipment when the top is properly constructed. The chrome finish provides a clean, reflective appearance that pairs well with contemporary cabinets and fixtures in offices, shops, or residential spaces.

Key Slim Series Details That Affect Your Build

• Camar Slim Series steel table legs deliver a 220 lbs per leg load bearing capacity, which lets you design tables and work surfaces that carry heavy loads without resorting to oversize leg sections or added supports.
• The 1-3/8 inch diameter tube concentrates strength in a small cross-section, freeing space around the perimeter of the table so chairs, cabinets, or storage elements can sit close to the edge without interference.
• A stated table height range of 27-3/4 inches to 28-3/4 inches provides one inch of usable vertical adjustment, so installers can compensate for floor variation while still hitting a consistent finished height.
• The welded bracket at the top of each leg creates a rigid connection point to the table, which helps resist racking and reduces movement between leg and top over time compared to separate, loose brackets.
• The chrome finish on the steel leg offers a bright, smooth surface that integrates visually with modern metal hardware and fixtures, helping tables match surrounding components in commercial and residential interiors.

Adjustable Steel Table Legs For Final Height Tuning

These adjustable steel table legs are built around a fixed-length steel tube with a 27-3/4 inch table height, letting you start from a known baseline when laying out cabinet and top dimensions. The built in 1 inch adjustable feet then give you the extra 1 inch of vertical travel, helping you bring the finished surface to as high as 28-3/4 inches while keeping the table level on uneven floors. Because the adjustment lives in the foot, the visible portion of the leg stays consistent in appearance from project to project, which is important when multiple tables share a room. The welded bracket at the top of the leg provides a stable interface to the underside of the table, so the adjustment happens at the floor rather than at the fasteners attaching to the top.

Where These Camar Slim Series Table Legs Fit

Using Slim Series Legs On Tables And Worktops

Camar Slim Series steel table legs with 1-3/8 inch diameter are suited to supporting tables and work surfaces where a clean, narrow leg is preferred, so they work well under office desks, light shop benches, and utility tables built around a standard sitting height. The specified table height of 27-3/4 inches defines the main leg length, making it straightforward to coordinate with surrounding cabinetry, drawer units, or mobile pedestals that are designed to sit under a typical desk-height top. The built in 1 inch adjustable feet extend that range up to 28-3/4 inches, which helps align adjacent tops across a room when floors vary from one wall to another. Each leg providing a 220 lbs load bearing capacity supports heavier tops or localized loads at a single leg position, so a four-leg configuration can handle substantial total weight when the top and fasteners are designed accordingly.

Details That Support Level, Repeatable Installations

The welded bracket at the top of each Slim Series leg is a key feature because it fixes the relationship between the steel tube and the mounting surface, reducing flex at the joint and helping the legs act uniformly under load. With the bracket welded in place rather than separate, installers have a consistent, square reference when positioning legs at corners or along rails, which improves repeatability across multiple tables in the same project. The 1-3/8 inch diameter tube keeps the footprint compact, allowing legs to sit close to corner joints or along narrow aprons without overwhelming the design, while still working with the 220 lbs per leg capacity to carry significant loads at each support point. The chrome finish offers a consistent, reflective surface, so legs match each other across a run of tables, easing layout in offices, conference areas, and commercial spaces where visual uniformity matters.

Common Questions About Camar Adjustable Table Legs

Selecting Camar Steel Table Legs For Your Project

Camar steel table legs in the Slim Series combine a 1-3/8 inch diameter tube, a 27-3/4 inch baseline table height, and built in 1 inch adjustable feet, so they support standard-height tables while handling uneven floors. The welded top bracket and 220 lbs per leg load bearing capacity give you a compact support that works in many table layouts without oversizing the structure. The chrome finish keeps the appearance consistent with contemporary hardware and fixtures. For projects that call for Slim Series performance and a standard sitting-height work surface, this Camar 380-7S-C1 leg is a practical choice.