6-11/16" - 8-11/16" Cabinet Leveling Leg

6-11/16" - 8-11/16" Cabinet Leveling Leg For Precise Setup

6-11/16" - 8-11/16" cabinet leveling leg from Camar provides adjustable support for cabinetry between 6-11/16 inches and 8-11/16 inches high, so bases can be brought to a consistent height on uneven floors during installation or remodeling work. This adjustable metal leveler uses a metal body to support casework, so the load is carried by a rigid component rather than by the cabinet material alone in long-term use. The leg uses an ABS plastic foot, which gives a stable contact point at the floor while separating the cabinet from direct contact with the surface during leveling. As part of Wurth Baer Supply's work surface and tables and cabinet or furniture levelers offering, this leg fits into shop workflows where accurate base height and repeatable setup are critical. The product is identified by manufacturer part number 345-17-02 for clear reordering and matching across jobs.

Key Cabinet Leveler Details That Support Installers

• The adjustable metal leveler design allows the cabinet height to be set between 6-11/16 inches and 8-11/16 inches, giving room to correct for floor variation while still aligning multiple cabinets to a common reference line.
• The metal leveler construction carries the cabinet load through metal, which supports cabinetry and work surfaces under normal service loads in a way that resists deformation at the support point.
• The ABS plastic foot at the bottom of the leveler provides a defined, stable contact point on the floor while separating the metal structure and cabinet from direct floor contact during adjustment.
• The tapered top on the leveler fits into its mating socket so the connection tightens as the leg is seated, which helps keep the cabinet base stable once the final height is set.
• The 330 lb weight bearing capacity per leveler allows each support point to carry substantial cabinet or furniture loads, so multiple levelers can be positioned to distribute weight across a run.

Height Adjustment Details For Cabinet Installation

This adjustable metal cabinet leveler allows the installer to work within a defined 6-11/16 inch to 8-11/16 inch height range, so bases can be set to a consistent finished height even when floor conditions change along a wall. The metal body of the leveler supports this adjustment by carrying the point load through a rigid structure, which helps keep the cabinet square once aligned. At the contact side, the ABS plastic foot gives a distinct bearing surface during height changes, so the installer can adjust the leg while the cabinet rests on a stable point. At the cabinet interface, the tapered top is engineered to seat tightly in its socket as the cabinet is set down, which helps maintain alignment after the last adjustment is made.

Using This Camar Cabinet And Furniture Leveler

Where This Adjustable Metal Leveler Performs Best

This Camar cabinet and furniture leveler from the work surface and tables and cabinet or furniture levelers category is suited to base cabinets and similar casework that need a defined height range. The 6-11/16 inch to 8-11/16 inch adjustment span fits installations where a standard toe space or finished base height is required, while still giving room to compensate for floor dips or crowns along a run. Because the leveler has a 330 lb weight bearing capacity per unit, it can be used under cabinetry, work surfaces, or tables where individual support points experience significant loading. The ABS plastic foot at the floor side gives a consistent bearing area across these applications, helping maintain a stable stance once the cabinet is brought to final elevation.

Why These Leveler Details Support Repeatable Results

The tapered top of the leveler is designed to create a tight connection with its socket, which helps the leg stay positively located under the cabinet so later movement during use is minimized. This geometry also supports repeatable placement across multiple cabinets, because each leveler seats in the same way as the socket engages the taper. The metal construction of the leveler means that height adjustments are supported by a rigid structure, allowing the installer to work confidently to a reference line without the support compressing significantly over time. The ABS plastic foot isolates the cabinet support from minor surface irregularities at the floor contact point, so each adjustment produces a predictable change in height. With a 330 lb per leveler capacity, layouts can be planned around known support loads, helping maintain consistent results from one project to the next.

Common Questions About Camar 345-17-02 Levelers

Selecting This Leveler For Cabinet Height Control

This adjustable metal cabinet leveling leg gives a 6-11/16 inch to 8-11/16 inch working range, a 330 lb per leveler capacity, and a tapered top that locks into its socket, providing stable cabinet support. The ABS plastic foot presents a defined bearing surface at the floor, so adjustments translate predictably into cabinet height changes. With Camar manufacturer part number 345-17-02, it aligns easily with project specifications. Use this leveler when precise base heights and repeatable results are essential across cabinetry, work surfaces, or tables.