Clip-On Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm

Salice Clip-On Mounting Plate For Series Hinges

Salice clip-on mounting plate describes this Clip-On Cam Adjustable Wing Mounting Plate from Salice America, designed as a hinge mounting plate in the Salice hinge system. It works as an economical clip on plate compatible with all Salice hinges Series F and Series B, so one plate style can serve a wide range of existing Salice cup hinges in the shop. The plate has a 6mm height, which sets the starting overlay relationship between door and cabinet for consistent layouts across multiple cabinets. As a hinge mounting plate in the Hinge Mounting Plates product class, it provides the stable interface between the cabinet and the Salice hinge arm, which keeps hinge performance consistent over time. The mounting plate is nickel plated and corrosion resistant, so the surface stands up in typical cabinet environments while maintaining a clean, professional appearance around the hinge arm.

Mounting Plate Details That Support Daily Work

• The economical clip on plate design lets the Salice hinge arm clip onto the plate, which speeds up door hanging and later removal during finishing or service.
• Compatibility with all Salice hinges Series F and Series B means one standard plate can be stocked for many frameless hinge applications, simplifying inventory and jobsite setups.
• Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam provides precise in-and-out door positioning, which helps align reveals after cabinets are installed and walls are not perfectly true.
• Height adjustment of plus or minus 2 mm by slotted holes allows small vertical changes, so doors can be leveled across a run without redrilling cabinet holes.
• The standard 37 mm x 32 mm positioning matches common drilling patterns, letting casework be prepared with consistent boring layouts across different jobs.
• Nickel plated, corrosion resistant construction helps the plate resist rust in normal kitchen or bath conditions, which supports long-term hinge function around the cabinet interior.

Hinge Mounting Adjustments And Fit Control

This hinge mounting plate uses a screw-on installation, so the plate fastens directly to the cabinet with wood screws for a solid connection between case and hinge. The depth adjustment of -0.5 mm to +2.8 mm by eccentric cam gives a controlled way to bring the door closer to or further from the cabinet front, helping tune overlay and gasket lines after doors are hung. Height adjustment of plus or minus 2 mm by slotted holes offers play in the vertical direction, which supports fine-tuning when lining up multiple doors across a bank of cabinets. The standard 37 mm x 32 mm positioning makes it easier to use existing line-boring or CNC patterns for repeatable hinge locations on production or custom work.

Where This Hinge Base Plate Works Best

Hinge Base Plate For Salice Series F And B

This Clip-On Cam Adjustable Wing Mounting Plate is part of the Hinge Mounting Plates category, built to work as the base plate for Salice hinge arms. It is described as an economical clip on plate compatible with all Salice hinges Series F and Series B, so it fits both of those hinge series in a typical cabinet hardware layout. The screw-on style base plate provides direct mounting to the cabinet, which suits many standard frameless cabinet constructions using wood or composite panels. With a 6mm plate height, the base plate sets a predictable starting geometry for overlay with those hinge arms, which is useful when the same case design is repeated across a project.

Adjustable Cam And Slots For Repeatable Results

The depth adjustment range of -0.5 mm to +2.8 mm by eccentric cam gives the installer a controlled way to adjust the hinge arm relative to the mounting plate, which helps correct for small case racking or door warp without changing drilling positions. Height adjustment of plus or minus 2 mm by slotted holes allows the plate to shift slightly before the mounting screws are tightened, which is useful for aligning door tops and bottoms across multiple openings. The standard 37 mm x 32 mm positioning ties into common hinge boring patterns, supporting repeatable drilling setups in the shop and predictable hinge locations on every cabinet side. The nickel plated, corrosion resistant finish keeps adjustment areas and screw heads accessible and clear over time, so future hinge tweaks remain straightforward during service or rework.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Runs

This Salice clip-on mounting plate with 6mm height, eccentric cam depth adjustment, and slotted-hole height adjustment offers a straightforward way to mount and fine-tune Salice Series F and Series B hinges. At Wurth Baer Supply, this hinge mounting plate can be ordered as an economical option when a compatible Salice America base plate with nickel plated, corrosion resistant construction is needed for frameless cabinet projects or hinge service work.