Domi Snap-On Hinge Mounting Plates Single Cam Adjustment, Screw-On Attachment, 12mm Height, Die-Cast Steel

Domi Snap-On Hinge Mounting Plate For Salice

Domi snap-on hinge mounting plate gives Salice hinge installations a stable base by pairing a clip on plate with screw-on attachment, so hinges can be mounted securely while still snapping on and off the plate as needed. The 12mm mounting plate height sets a consistent door position relative to the cabinet, which helps keep reveals uniform across a run of doors. Die-cast steel construction forms a rigid base that supports the hinge under repeated door movement. The nickel plated, corrosion resistant finish protects the plate surface in typical cabinet environments, which supports long-term hinge function. A single eccentric cam built into the plate controls depth adjustment, so the installer can fine-tune door overlay without remounting the plate. This hinge mounting plate works with Salice hinges to provide the underlying structure that keeps doors aligned and adjustable over time.

Key Hinge Plate Details That Save Time

• The economical clip on plate design controls cost per opening while still allowing quick hinge attachment and removal, which helps installers adjust or replace doors without disturbing the plate position.
• Screw-on attachment fastens the hinge mounting plate directly to the cabinet with screws, creating a fixed, solid reference point that supports precise hinge alignment during installation and later service work.
• The 12mm height of the mounting plate establishes a known mounting plane, giving consistent door projection from the cabinet face so layout can be repeated accurately across multiple carcasses.
• Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam lets the installer move the door closer or farther from the cabinet, trimming gaps and overlay without relocating screws or re-drilling holes.
• Height adjustment of plus or minus 2 mm by slotted holes provides a small vertical shift, so doors can be leveled relative to each other after mounting, reducing rework on face lines.
• Nickel plated, corrosion resistant finish on the die-cast steel base plate protects the metal over time, supporting smooth hinge action and dependable door alignment in everyday cabinet use.

Mounting And Adjustment Details For Installers

The screw-on attachment method anchors the hinge mounting plate to the cabinet with mechanical fasteners, giving the installer a firm base before any hinge is clipped on. The standard 37 mm x 32 mm positioning defines the mounting pattern on the cabinet, which simplifies layout when drilling for multiple plates along a cabinet run. Depth adjustment of -0.5 mm to +2.8 mm is controlled by an eccentric cam on the plate, so turning the cam shifts the hinge location relative to the cabinet side, tightening or loosening the door overlay. Height adjustment of plus or minus 2 mm comes from slotted holes in the plate, allowing the plate to slide up or down slightly before screws are fully tightened. These combined adjustments give the installer practical control over door fit after initial mounting.

Using This Plate With Salice Hinges On Jobs

Where This Salice Hinge Plate Fits Best

This economical clip on plate is compatible with all Salice hinges Series F and Series B, so it can be used across a wide range of concealed hinge applications that specify those hinge series. The Domi snap-on hinge mounting plate acts as the fixed interface between the cabinet and the hinge arm in these systems, defining both the 12mm height and the standard 37 mm x 32 mm positioning. Because the plate works with both Series F and Series B, shops using multiple Salice hinge models in those lines can standardize on a single mounting plate footprint. The die-cast steel body provides a sturdy base for these hinges, which helps maintain alignment when doors are opened and closed repeatedly in normal cabinet service.

How Single Cam And Slots Improve Results

The single cam adjustment built into this hinge mounting plate provides depth movement from -0.5 mm to +2.8 mm, so a small turn of the eccentric cam can pull the door slightly toward the cabinet or push it out, refining overlay and clearing adjacent fronts. This adjustment range gives enough travel to correct minor drilling variances or carcass irregularities without reworking holes. Height adjustment of plus or minus 2 mm through slotted holes lets the installer nudge the plate up or down, helping line up door tops and bottoms when working along a bank of cabinets. Because the hinges snap onto the plate, doors can be removed and reattached while the adjusted plate stays fixed, preserving the fine-tuned settings on subsequent service visits or during other cabinet adjustments.

Common Questions About This Salice Hinge Plate

Selecting This Hinge Mounting Plate For Work

This Domi snap-on hinge mounting plate from Salice America pairs clip on convenience with screw-on stability, giving installers a 12mm die-cast steel base that supports precise door alignment. Compatibility with all Salice hinges Series F and Series B means one mounting solution can serve many hinge choices in that family. Depth adjustment of -0.5 mm to +2.8 mm by eccentric cam and height adjustment of plus or minus 2 mm by slotted holes provide practical tuning of overlay and reveals. The nickel plated, corrosion resistant finish supports long-term service on cabinet jobs, making this hinge mounting plate a straightforward choice when specifying Salice concealed hinges.