Salice Self-Close Full overlay Institutional Hinge, 270º Screw-on Nickel - CMP3A99

Salice Self-Close Full Overlay Institutional Hinge Details

Salice self-close full overlay hinge is a semi-concealed institutional hinge designed for cabinet doors where controlled closing and extended access are required. The hinge provides self-close action, which pulls the door shut at the end of travel, helping doors sit properly against the cabinet without manual pushing on every close. As a semi-concealed hinge, it keeps most hardware hidden while leaving functional knuckle details accessible, which suits institutional and commercial environments needing frequent operation and quick visual checks of hinge position. This model is part of the Salice Series M hinges, so it uses a standardized hinge geometry and adjustment layout that fits directly into cabinets designed around the Series M system. Brand identification as Salice America connects this hinge to a widely used cabinet hardware platform in institutional-grade casework and storage.

Key Salice CMP3A99 Features For Daily Use

• The hinge conforms with FIRA level 5 and ANSI Grade 1 requirements, so it is built for intensive use in institutional environments where doors see high cycle counts and repeated openings each day.
• The hinge meets ISO 9001 and ISO 14001 environmental certification, tying the product to controlled manufacturing quality systems and environmental management that support consistent part performance across large projects.
• The 270 degree opening for 19 mm thick doors lets doors swing well past 180 degrees, creating wide access to cabinet interiors where full door clearance improves loading, cleaning, or equipment access.
• The 180 degree opening for doors up to 24 mm allows thicker doors to still open fully to a straight-out position, which helps on deeper or more robust doors that need strong hinges without losing clearance.
• Nickel plated construction provides corrosion resistance, helping the hinge maintain function and appearance over time in normal institutional cabinet environments such as labs, healthcare, and high-traffic storage areas.
• Independent, automatic three dimensional adjustment allows fine tuning in multiple directions, simplifying alignment of doors across a run of cabinets when setting reveals and margins to tight visual standards.

Mounting, Cup Size, And Overlay Function

The CMP3A99 is a screw-on hinge, so it fastens directly to the cabinet using mechanical screws, creating a solid connection suitable for institutional casework where strength and service access are important. A hinge cup diameter of 35 mm matches common European-style boring patterns, so door preparation can rely on standard 35 mm boring equipment for repeatable hinge placement. The hinge cup depth of 12 mm sets how deep the cup sits in the door, which helps prevent door blowout on thinner doors while still providing enough cup engagement for stability. A hinge cup boring pattern of 45 mm x 9.5 mm defines the hole spacing and setback, which guides CNC or line-boring setups so doors across a project share identical hinge positioning. Variable overlay capability in full overlay and half overlay formats, as well as inset options, supports different face-frame or frameless layouts without changing the core hinge platform.

How This Institutional Hinge Works In Practice

Where This Salice Institutional Hinge Fits Best

This Salice Series M institutional hinge is classified under hinges and institutional hinges, positioning it for cabinets in schools, healthcare, labs, and commercial storage that need robust hardware. Being a semi-concealed hinge, it fits projects balancing clean cabinet fronts with visible hinge components at the edge, which supports visual inspection and straightforward maintenance. The stated full overlay function allows doors to cover most of the cabinet side, which is common in frameless institutional casework where flush, easy-to-clean faces are valued. Variable overlay options, including full overlay recessed knuckle, full overlay external knuckle, half overlay recessed knuckle, and inset recessed knuckle, extend its use across different cabinet reveals and door positions within one hinge family.

The 270 degree opening for 19 mm thick doors is especially suited to cabinets where doors need to swing well out of the way, such as janitorial closets, equipment cabinets, or storage units where carts or large items move through the opening. For doors up to 24 mm thick, the 180 degree opening supports heavier or thicker fronts, providing a straight-out swing that still grants wide access and keeps doors from obstructing adjacent units. As a Salice America product, the CMP3A99 fits into projects that already standardize on Salice hardware, which can simplify hinge selection across different rooms or casework runs while keeping a consistent hinge style.

Adjustment And Workflow Advantages In Cabinet Runs

The independent, automatic three dimensional adjustment built into this hinge provides fine control over door position in three axes, which directly affects how quickly an installer can align multiple doors across long cabinet runs. Vertical adjustment assists in lining up door tops and bottoms, which matters in institutional corridors or lab lines where misalignment is highly noticeable. Horizontal adjustment helps control the reveal between doors or between door and side panel, preventing binding during operation and avoiding door-to-door contact in high-traffic use. Depth adjustment fine tunes how far the door sits relative to the cabinet front, which influences both overlay consistency and the self-close action engagement point.

The self-close function works together with these adjustments by drawing the door into its final closed position, which reduces the likelihood of doors sitting partially ajar in hallways or workspaces. Nickel plating adds corrosion resistance, supporting long-term hinge motion even when cabinets experience cleaning cycles or variable humidity typical in many facilities. Since the hinge is compatible with all Salice Series 200 hinge mounting plates, in both clip-on and slide-on styles, it can integrate with existing mounting plate inventories designed around the Series 200 standard while keeping the CMP3A99 hinge body as the working component.

Common Questions About The Salice CMP3A99 Hinge

Selecting This Hinge For Institutional Casework

The Salice CMP3A99 self-close full overlay institutional hinge pairs a 35 mm cup system with screw-on mounting, which lines up with standard cabinet machining and straightforward installation. Its 270 degree and 180 degree opening ranges, along with variable overlay configurations, give flexibility across door thicknesses and cabinet designs within one hinge family. Nickel plated construction, FIRA level 5 and ANSI Grade 1 conformance, and ISO 9001 and ISO 14001 backing position it for demanding institutional environments where cabinets see daily use. For projects built around Salice Series M and Series 200 platforms, this hinge allows consistent hardware selection and adjustment behavior from unit to unit.