Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Candler knob 1-1/4 inch is a decorative cabinet knob from the Amerock Candler collection, designed for use on cabinet doors and drawers where a compact, square pull point is needed. The knob measures 1-1/4 inch (32 mm) in length and 1 inch (25 mm) in width, so it provides a comfortable grip while staying proportional to smaller and mid-size fronts. Its projection of 1-1/8 inch (29 mm) gives fingers room behind the knob, which helps reduce knuckle scraping during daily use. The antique silver finish matches projects calling for a traditional or transitional look, adding a muted metallic tone that works well on painted or stained surfaces. The knob body is zinc die-cast, giving a solid feel in hand while supporting consistent dimensions across multiple pieces on a job.
The Amerock BP29340AS knob uses its 1-1/4 inch length and 1 inch width to give installers a clear center point for drilling, which simplifies layout on cabinet doors and drawer fronts. Its base length of 1 inch (25 mm) and base width of 3/4 inch (19 mm) set a compact footprint that rests fully on standard rail and stile faces, so the knob edge does not overhang typical cabinet framing. The 1-1/8 inch (29 mm) projection defines how far the hand sits from the cabinet face, supporting repeated openings without fingers pressing into the wood or finish. Zinc die-cast construction provides a stable threaded connection for the mounting screw, which supports secure fastening to common cabinet materials when properly tightened from the back.
The Amerock Candler series antique silver knob is positioned for cabinet work where a traditional or transitional square knob is specified. Its broad-faced design distributes the contact area where the hand pulls, which can feel more stable on larger drawers compared to very small pulls. The 1-1/4 inch length and 1 inch width help the knob read visually as a square element on face-frame or frameless cabinets, giving installers an easy reference when aligning multiple knobs along a run of doors or drawers. With a base length of 1 inch (25 mm) and base width of 3/4 inch (19 mm), the knob seats well on typical rail heights, so it works on upper, base, and vanity cabinets using the same part number across the job.
The antique silver finish lets the knob tie into other antique silver decorative hardware on the same project, which keeps hinge, pull, and knob finishes consistent from one elevation to another. Because the knob is zinc die-cast, each piece holds the same basic shape and edge profile, supporting uniform shadow lines under jobsite lighting. In use, the 1-1/8 inch (29 mm) projection offers enough clearance for users with larger hands to get a full grip without contacting the cabinet face, which is helpful on heavy drawers that see repeated loading and unloading in kitchens or work areas.
The defined measurements on this Amerock decorative knob support predictable layout and drilling. A 1-1/4 inch (32 mm) length gives a known size when spacing knobs from door edges, so a consistent reveal can be maintained across multiple fronts. The 1 inch (25 mm) width pairs with the square profile, making it straightforward to visually center the knob on drawer fronts by aligning edges to layout marks. Its 1-1/8 inch (29 mm) projection creates a fixed stand-off from the door or drawer face, so front-to-front clearance on opposing cabinets can be planned using that dimension.
The zinc die-cast material provides a solid core for the threaded bore that accepts the mounting screw, which matters when tightening against wood, composite, or similar cabinet substrates. Base dimensions of 1 inch (25 mm) by 3/4 inch (19 mm) define a seating area that spreads contact pressure over more surface than a very small foot, helping the knob sit flat once installed. The Amerock Candler collection naming ties this knob to other Candler pieces, allowing the same design language to carry across knobs and pulls on the project while using the BP29340AS part where a compact single-point pull is needed.
The Amerock BP29340AS knob has a length of 1-1/4 inch, width of 1 inch, projection of 1-1/8 inch, and a base measuring 1 inch by 3/4 inch, which guides drilling and layout.
The 1-1/8 inch projection sets the gripping distance from the cabinet face, providing finger clearance that supports comfortable pulling on doors and drawers during repeated daily use.
The knob uses an antique silver finish, which delivers a traditional metal tone that coordinates with other antique silver decorative hardware in the same space.
The Amerock Candler knob is zinc die-cast, providing a solid, consistent body and reliable threaded bore for the mounting screw on cabinet doors and drawers.
This 1-1/4 inch cabinet knob is used on cabinet doors and drawers where a compact square pull point is desired, fitting well on kitchen, bath, or utility cabinetry.
The Candler design has a broad face and defined base, so installers can align edges to layout marks, helping rows of knobs sit straight across doors and drawers.
The Amerock Candler knob 1-1/4 inch pairs its antique silver finish with defined dimensions to support consistent cabinet layouts. When a project calls for a square, zinc die-cast knob with a 1-1/8 inch projection and compact base footprint, this BP29340AS part number lets installers match design, size, and finish across doors and drawers using a single, repeatable component.
Sold In: 1 Each
