
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Candler 3 in cabinet pull is a zinc cabinet pull designed for decorative cabinet hardware work where a 3 in (76 mm) center-to-center layout is needed, so it suits standard drilled cabinet and drawer fronts using that spacing. The gunmetal finish on this pull provides a dark metallic look that supports projects calling for a modern or transitional appearance on doors and drawers. Its broad-faced design described for the Candler collection creates a wide gripping surface, which helps fingers find a solid hold when opening heavier cabinet fronts. Traditional feet at each end of the pull give a defined transition between the door surface and the handle, which can help visually align hardware across multiple fronts in a run of cabinets. The pull length of 4-3/8 in (111 mm) spans past the mounting holes, which leaves visible handle at both sides for balanced appearance on typical cabinet widths.
This 3 in center to center pull is built with the mounting holes set 3 in (76 mm) apart, so it matches installations laid out to that standard spacing on cabinet doors and drawers. The overall length of 4-3/8 in (111 mm) positions the ends of the pull beyond the holes, which creates a clear visual cue when aligning multiple pulls along a bank of cabinets. A projection of 1-1/8 in (29 mm) fixes how far the pull stands off the face, which helps plan door clearance relative to adjacent walls or appliances in a run. With a width of 3/4 in (19 mm), the pull occupies a controlled band across the front, which can be important when balancing hardware scale against narrow drawer fronts or frame members. The base dimensions of 7/8 in (22 mm) by 3/4 in (19 mm) define the footprint against the surface, which helps coordinate the pull placement with trim details or panel reveals.
The Candler collection description notes a broad-faced design with traditional feet, defining how this gunmetal pull reads on a cabinet face and how it interacts with surrounding trim profiles. That broad-faced shape creates a flat gripping area across the zinc pull body, which supports a full-finger grasp on drawers that see frequent opening and closing. Traditional feet at each end of the pull concentrate visual weight near the mounting areas, which can help the hardware line up cleanly along rails and stiles on framed or frameless cabinet runs. The gunmetal finish on the pull delivers a darker metallic tone, which can tie into similar tones on hinges or adjacent metal components in a kitchen or shop installation. Being part of the Candler collection also helps coordinate this pull with other pieces from the same line where a consistent hardware style is desired across multiple cabinet locations.
The zinc material specified for this Amerock Candler pull defines the base metal used in the hardware, which supports a sturdy feel when mounted and provides a solid substrate for the gunmetal finish during regular cabinet use. A center-to-center distance of 3 in (76 mm) gives a fixed reference for drilling jigs or CNC programs, which can speed repetitive door and drawer production when laying out hardware for a full project. The overall length of 4-3/8 in (111 mm) anchors design drawings, allowing installers to position pulls at consistent offsets from door and drawer edges. With a projection of 1-1/8 in (29 mm), the installer can account for handle stand-off in tight spaces, helping hardware clear adjacent fronts when doors swing or drawers extend. Width and base measurements at 3/4 in (19 mm) and 7/8 in (22 mm) by 3/4 in (19 mm) give known bearing areas, which support predictable contact with the cabinet surface and can be factored into edge distances in shop layouts.
The Amerock Candler 3 in cabinet pull has a 3 in (76 mm) center-to-center dimension, so mounting holes are spaced to that measurement on the cabinet or drawer front.
The Amerock BP29349GM pull has an overall length of 4-3/8 in (111 mm), which extends beyond the 3 in center-to-center mounting points for visual balance.
The Candler series 3 in center-to-center gunmetal pull is made from zinc, giving a solid metal construction under the finish for everyday cabinet operation.
The gunmetal cabinet pull projects 1-1/8 in (29 mm) from the cabinet surface, providing space for fingers behind the pull during opening and closing.
The Amerock Candler pull has a width of 3/4 in (19 mm), giving a defined gripping band across the front that aligns with many cabinet face proportions.
The BP29349GM Candler pull has a gunmetal finish, providing a dark metallic look that coordinates with similar tones on other decorative cabinet hardware.
The Amerock Candler 3 in cabinet pull combines a 3 in (76 mm) center-to-center layout, 4-3/8 in (111 mm) overall length, and 1-1/8 in (29 mm) projection, giving clear reference points for planning cabinet hardware runs. Its zinc construction and gunmetal finish establish both material and appearance in one part number, while the broad-faced Candler design with traditional feet supports a consistent style across multiple fronts. For projects built around standard 3 in spacing and a gunmetal look, this pull offers defined dimensions that fit directly into cabinet drilling and layout workflows.
Sold In: 1 Each