Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Extensity 3-3/4 inch pull gives cabinet doors and drawers a defined grip point, which helps users open and close fronts without stressing edges or finishes. The pull uses a 3-3/4 inch, or 96 mm, center-to-center hole spacing, so installers can lay out or match standard drill patterns across a run of cabinets. Extensity blends graceful arcs with a strong geometric quality, creating a visual line that reads clean and intentional on both framed and frameless cabinets. The pull is finished in oil-rubbed bronze, so its rich burnished surface adds contrast against light cabinetry and blends into darker woods. The finish features copper brush marks, adding depth that breaks up glare and helps minor fingerprints visually disappear in normal use. As part of Amerock decorative cabinet hardware, this pull serves as a finishing detail that ties together doors, drawers, and surrounding moldings.
The Extensity 3-3/4 inch (96 mm) center-to-center measurement indicates the distance between the mounting holes, which guides drilling or boring operations on cabinet doors and drawers. Using this fixed spacing, installers can transfer measurements from templates or existing fronts and keep hardware aligned in straight, repeatable runs. The pull functions as cabinet hardware within the decorative handles and pulls category, so it installs in the same plane as typical door and drawer fronts. Because the pull is part of Amerock decorative and functional cabinet hardware, it works naturally within layouts that already reference Amerock sizing and styling. The defined center-to-center dimension also supports straightforward replacement where existing fronts are already drilled for 96 mm handles.
The Amerock Extensity series pull belongs to the decorative hardware and moldings, handles and pulls category, positioning it for cabinet doors, drawer fronts, and similar casework faces. Its 3-3/4 inch (96 mm) center-to-center dimension aligns with a commonly used drilling pattern, so it suits new installations where casework is being bored on a line borer or with a simple jig. Because it is part of Amerock decorative and functional cabinet hardware, the pull matches projects that already specify Amerock Corporation as the hardware brand. The oil-rubbed bronze finish with copper brush marks brings a burnished look that pairs with traditional, transitional, or old-world-influenced interiors. On lighter painted or stained fronts, the darker finish defines each opening; on deeper tones, the copper brush marks give just enough highlight to keep the hardware readable for users.
The Extensity profile blends graceful arcs with a strong geometric quality, which creates a consistent visual line when multiple pulls are installed in sequence along a bank of cabinets. This combination of curves and straight edges helps installers align hardware by eye, because the geometry reveals even small deviations from level or plumb. Oil-rubbed bronze with copper brush marks adds depth to any space by creating subtle light-and-dark variation along the handle, helping each pull stand out without dominating the cabinet face. The rich burnished nature of the finish embraces the beauty and craft of old-world artistry, giving shops and installers a straightforward way to deliver a handcrafted impression using a defined part number. Since Amerock offers a variety of styles and finishes at affordable prices, this pull can be specified across multiple rooms while staying within project hardware budgets and maintaining a coordinated look.
The BP29385ORB is an Amerock Extensity series decorative pull, so it functions as a handle for cabinet doors and drawers within the handles and pulls category.
The 3-3/4 inch (96 mm) center-to-center dimension describes the distance between mounting holes, guiding drilling and allowing accurate alignment with 96 mm layouts.
The oil-rubbed bronze finish provides a rich burnished surface, while copper brush marks add depth and visual texture that coordinates with bronze tones in a room.
The Amerock Extensity pull is used on cabinet doors, drawer fronts, and similar casework, serving as decorative and functional cabinet hardware.
The Amerock brand provides decorative and functional cabinet hardware solutions, so this pull integrates into broader Amerock style and finish programs.
The Extensity blend of graceful arcs and strong geometric lines creates a consistent visual profile, helping multi-cabinet runs look straight and intentional.
The Amerock Extensity 3-3/4 inch (96 mm) center-to-center pull in oil-rubbed bronze gives installers a defined size, finish, and style for coordinated cabinet projects. Its Extensity design blends graceful arcs with a strong geometric quality, so banks of doors and drawers read as a unified setup. The rich burnished finish with copper brush marks adds depth and supports designs that draw on old-world artistry or warm metal tones. At Wurth Baer Supply, this Amerock decorative cabinet pull fits directly into hardware schedules that call for 96 mm center-to-center layouts and an oil-rubbed bronze finish across residential or light commercial casework.
Sold In: 1 Each
