Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Cup Pulls 3 in center to center identifies this cup pull as a 3 inch (76 mm) handle from the Cup Pulls collection, so installers get a known size that lines up with standard cabinet drilling for straightforward layouts and consistent runs across doors and drawers. The Antique Silver finish defines the visual tone, giving cabinets a muted metallic look that suits traditional and transitional jobs where a bright chrome would feel out of place. The zinc die-cast material sets the base construction, providing a solid-feeling pull body that holds its shape when mounted across multiple drawers in a bank. The length of 3-7/16 inches gives a little extra grip area beyond the 3 inch hole spacing, which helps hands catch the pull cleanly on wider or taller drawer fronts. The 1 inch projection establishes how far the pull stands off the face, leaving practical finger clearance without dragging the pull too far into walk paths.
The 3 inch center-to-center measurement defines the distance between mounting holes, so this Amerock Corporation cup pull drops into standard 3 inch layouts on cabinet doors or drawers without redrilling. The overall length of 3-7/16 inches means the ends extend slightly past the mounting holes, framing the bore pattern for a balanced look on face frames and full-overlay fronts. The 1-5/8 inch width controls how much of the drawer rail the pull covers vertically, which matters when aligning these pulls across stacked drawers to keep sightlines consistent. With a 1 inch projection, the pull stands off the surface just enough for a comfortable grip while still keeping the center of force close to the face, which supports smooth drawer operation. The combination of length, width, and projection gives installers predictable geometry when laying out multiple pulls in rows or aligning them under countertop edges.
The Antique Silver finish on the Amerock BP53010AS cup pull sets it up for projects where a softer, aged metallic look is preferred, such as traditional kitchens, built-in storage, or furniture-style vanities. In those settings, the Cup Pulls collection styling combines traditional contours with a simple profile, so the hardware reads as classic without distracting from door and drawer profiles. The 3 inch center-to-center format fits cabinets bored on this common spacing, which is frequently used across stock, semi-custom, and shop-built casework, allowing this pull to be used on runs of drawers that share that drilling pattern. Because the length is 3-7/16 inches, the pull visually fills the space between holes while leaving a clean reveal around the edges, which keeps drawer fronts from looking under-scaled when several pulls are lined up.
The width of 1-5/8 inches gives the cup a presence that pairs well with a range of rail heights, so it can sit comfortably on small top drawers and larger base drawers using the same part number. The 1 inch projection dictates the working gap behind the lip of the cup; this depth is significant because it influences how easily fingers can catch the pull, especially on deeper or heavier drawers. By using zinc die-cast construction, Amerock Corporation provides a pull body that feels solid when grasped from below, which helps the pull handle repeated operation on storage drawers and frequently used cabinet bays. Across multi-unit installs, the combination of traditional Cup Pulls styling and Antique Silver finish makes it possible to repeat the same hardware on perimeter cabinets, islands, and ancillary built-ins while maintaining a consistent visual language.
The Amerock BP53010AS cup pull has a 3 inch center-to-center, 3-7/16 inch length, 1-5/8 inch width, and 1 inch projection, which together define its footprint and grip clearance on cabinet fronts.
The 3 inch center-to-center measurement matches a common drilling pattern, so this cup pull can align with standard bore layouts or replace existing 3 inch pulls on cabinet doors and drawers.
The Amerock antique silver cup pull is made from zinc die-cast, providing a solid-feeling body that supports everyday operation on drawers and doors when properly fastened from the rear.
The 1 inch projection sets how far the pull stands off the cabinet face, creating finger clearance for gripping while keeping the hardware close for a compact profile.
The Amerock Cup Pulls BP53010AS model uses an Antique Silver finish, which provides a muted metallic look suited to traditional and transitional cabinet designs.
The 1-5/8 inch width determines how much vertical space the pull occupies, helping it stay proportional on both small and large drawers in a run.
The Amerock Corporation BP53010AS cup pull combines a 3 inch center-to-center layout with a 3-7/16 inch length, giving cabinetmakers a traditional Cup Pulls collection option that fits standard drilling while presenting a balanced profile. Its zinc die-cast construction supports a solid grip on doors and drawers, and the Antique Silver finish delivers a consistent, softer metallic tone across banks of cabinets. For projects built around 3 inch center-to-center hardware in a traditional style, this cup pull offers a defined set of dimensions and finish characteristics that can be repeated across the job.
Sold In: 1 Each
