Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Maple White is a hardwood plywood panel from Perfecta Plywood with a maple white face, so it presents a clean maple appearance that suits cabinet, furniture, and interior panel work where a consistent look matters. The panel uses an MDF core, which gives a flat, uniform substrate that sands smoothly and supports even contact with glued faces during assembly. The face is plain sliced, creating a traditional sliced maple look that works well when matching other plain sliced maple components on a job. The sheet is A-1 graded, so one face is selected for primary use while the back face is suitable for secondary surfaces where appearance is less critical. The 1/4 inch thickness keeps weight down while still providing a rigid panel for backing, drawer bottoms, and light-duty paneling in woodworking projects.
This Perfecta Plywood hardwood maple white panel has a nominal 1/4 inch thickness, giving a slim profile that drops easily into cabinet backs, drawer bottoms, and light partitions without consuming interior space. The sheet size of 48.5 by 96.5 mirrors standard 4 by 8 panel dimensions while providing a bit of extra length and width, which helps when trimming factory edges or fitting panels to slightly out-of-square openings. The MDF core supports edge machining, so grooves, rabbets, and shallow dados can be cut for joining panels within casework. As a plywood hardwood product, it integrates into woodworking layouts that expect sheet goods to align with standard cabinet and millwork dimensions.
This Plywood Hardwood Maple White panel from Perfecta Plywood works well anywhere a maple-faced sheet is needed in cabinetry or interior woodworking. The maple white face provides a unified appearance across cabinet backs, end panels, or light-duty partitions that are visible when doors are open. With a 48.5 by 96.5 format, one sheet spans typical cabinet runs and closet sections, supporting full-height backs or side panels with fewer seams. The 1/4 inch thickness is well suited to applications where structural loads are modest, such as backing, drawer bottoms, and overlay panels that primarily serve to close in a case or present a finished surface. As an A-1 graded maple panel, it offers a designated face for these more visible surfaces while still providing a serviceable reverse side.
The MDF core in this Perfecta Plywood hardwood maple white panel delivers a consistently flat sheet, which helps reduce twist or bow when building square cabinet boxes and aligning backs to sides. That uniform core density helps routed edges and machined grooves cut cleanly, supporting repeatable joints from piece to piece in a production run. The plain sliced maple face ensures that each sheet presents a recognizable sliced grain pattern, simplifying layout when installers need multiple panels to read consistently across a wall of cabinets or built-ins. A-1 grading means the primary face can be planned as the show surface, helping layout crews orient sheets quickly during cutting and assembly rather than evaluating both sides on every piece. The 1/4 inch thickness further aids handling, as lighter panels are easier to move into position during fitting, especially on larger wall or ceiling applications where full-size sheets are used.
The Plywood Hardwood Maple White panel measures 48.5 by 96.5, so it covers a standard 4 by 8 area with extra margin useful for trimming to square or sizing to precise cabinet or panel openings.
The Perfecta Plywood hardwood maple white panel has a 1/4 inch thickness, providing a slim yet stable sheet that suits cabinet backs, drawer bottoms, and lightweight partitions in woodworking projects.
This maple plywood uses an MDF core, giving a dense, uniform interior that sands smoothly and helps panels sit flat in joinery, supporting precise assembly in cabinetry and millwork.
A-1 graded on this maple plywood indicates one primary face is selected for appearance, so that side can be oriented toward visible cabinet or panel areas while the reverse serves less visible surfaces.
The Perfecta Plywood panel is described as plain sliced, giving a sliced maple face that provides a familiar grain pattern suitable for matching other plain sliced maple components.
The manufacturer part number for this Plywood Hardwood Maple White panel is 10401, which helps align orders and shop drawings when specifying this exact sheet in project documentation.
This Perfecta Plywood hardwood maple white sheet combines a plain sliced maple face, MDF core, A-1 grade, and 1/4 inch thickness in a 48.5 by 96.5 format, so it slots directly into cabinet and interior woodworking layouts that rely on maple-faced panels. The dimensional format supports full-size backs, sides, or partitions with trim margin for accurate fitting, while the graded maple face provides a clear show side for exposed interiors or open shelving. For projects calling for a maple appearance with flat, uniform core support, this panel offers a defined, repeatable choice across multiple pieces on the same job.
Sold In: 1 Sheet