1/2" drawer bumper almond Bainbridge 4604AL-32

1/2" Drawer Bumper Almond For Quiet Stops

1/2" drawer bumper almond gives a low-profile plastic stop for cabinet drawers, so the drawer front meets the cabinet frame on a controlled plastic contact instead of wood-on-wood. The Bainbridge Manufacturing design uses a single #4 x 1/2" flat head screw attachment point, so the bumper fastens securely at one precise location on the cabinet. Because the bumper is made of plastic, the drawer front contacts a consistent surface each time, helping reduce wear at the meeting point. The almond color ties into light-toned drawer interiors, keeping the installed bumper visually unobtrusive around the drawer opening. This bumper style supports installers who need a simple, repeatable way to add a defined stop point for drawer travel, using a part sized at 1/2" high to establish a predictable stand-off between the drawer front and cabinet.

Key Drawer Bumper Details That Save Time

• The plastic drawer bumper construction provides a uniform contact surface, which helps keep the drawer front from striking raw cabinet material and supports a cleaner, more controlled close against the stop point.
• A single #4 x 1/2" flat head screw attachment point secures the bumper firmly, so installers can set it once and rely on that fastened location to hold the stop position through regular drawer use.
• The screw is inset into the bumper body, which keeps the fastener head below the contact surface and supports a smoother drawer stop where only the plastic bumper meets the drawer front.
• The bumper design with a reference tab lets the installer register the part to the drawer front line, so aligning multiple bumpers along a bank of drawers becomes a quick and repeatable step.
• The 1/2" high bumper dimension sets a defined projection from the mounting surface, establishing a consistent gap between the drawer front and cabinet frame wherever this part is used.

Mounting And Alignment Details For This Bumper

This plastic cabinet drawer bumper mounts with one #4 x 1/2" flat head screw driven through the bumper into the cabinet, giving a straightforward, single-point installation. Because the screw head sits inset within the bumper, the drawer front contacts only the shaped plastic surface during closing, not the fastener. The built-in reference tab on the bumper lets the installer position the part relative to the drawer front line, so layout can be repeated accurately from drawer to drawer. With the bumper standing 1/2" high off the mounting surface, the stop point is defined by that dimension, helping keep drawer fronts set off the cabinet face at a consistent distance wherever this bumper is used.

Using The Bainbridge Drawer Bumper On Projects

Where This Plastic Drawer Bumper Works Best

The Bainbridge drawer bumper, at 1/2" high, suits cabinet layouts where a controlled stand-off between the drawer front and cabinet face is important for visual alignment across multiple drawers. By fastening the bumper to the cabinet with a single #4 x 1/2" flat head screw, installers can place the stop exactly where the drawer travel should end, helping pattern out a uniform front plane in kitchen, bath, or shop cabinetry using this style of stop. The almond color of the plastic bumper coordinates with many light interior finishes, so the part remains discreet around the drawer opening while still providing a tangible contact point. Because the screw sits inset inside the bumper, the working face that meets the drawer front remains smooth plastic, which supports a cleaner closing feel at the stop.

Why The Reference Tab And Height Improve Results

The drawer bumper with reference tab gives installers a physical edge to register against the intended front line, so marking and drilling for the single #4 x 1/2" flat head screw can follow that reference along a run of cabinets. This alignment tab reduces layout guesswork when several drawers share the same reveal, since the bumper body itself defines where the stop sits in relation to the front. The 1/2" high bumper projection establishes how far the drawer front stands off from the cabinet when closed, turning that dimension into a repeatable setting whenever the same part number 4604AL-32 is used. With the screw positioned inset inside the plastic bumper, the contact point remains the molded surface rather than metal, which helps keep the closing action tied to the geometry of the bumper and preserves the appearance of the contact area over time.

Common Questions About This Drawer Bumper

Selecting This Almond Bumper For Your Drawers

The 1/2" drawer bumper almond from Bainbridge Manufacturing offers a plastic stop that mounts with a single #4 x 1/2" flat head screw and uses a reference tab for quick layout. The 1/2" high projection and inset screw design together define a clear, smooth contact point for the drawer front. For cabinet runs that benefit from a consistent stand-off and an understated almond contact surface, this bumper provides a straightforward, repeatable way to set that closing position.