Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Four pull is a 3 inch center to center cabinet handle designed for cabinet and drawer fronts where a classic metal pull is needed. It uses a 3 inch (76 mm) center to center drilling, which aligns with common cabinet boring patterns so existing holes can be reused during hardware updates. The overall length of 5-1/4 inch spans a wider area on the front, giving fingers room to grip when opening doors or drawers. A projection of 1 inch sets the hand away from the surface, which helps reduce knuckle contact on face frames during use. The 1/2 inch width provides a slim profile, which suits narrow stiles or rails without crowding the edge. A base diameter of 5/8 inch gives each foot a defined landing area, helping visually cover typical drill points on wood or composite fronts.
This Berenson Corporation pull is specified with a 3 inch (76 mm) center to center dimension, which guides where mounting holes are bored in the door or drawer front. Length is listed at 5-1/4 inch, so the handle extends past the screw points for a balanced visual on standard cabinet widths. Projection of 1 inch sets the handle off the surface, giving clearance for fingers between the pull and the door face. Width of 1/2 inch keeps the profile narrow, which fits well on smaller drawer fronts or slim frame members. Each base has a 5/8 inch diameter, which helps cover the immediate area around the fastener point for a clean finished look on the surface.
This Advantage Plus Series pull from Berenson sits in the Decorative Hardware & Moldings category for handles and pulls, so it is suited to cabinet and furniture fronts needing a functional grip point. The Verona Bronze finish provides a darker, traditional tone that pairs with many door styles in kitchens, baths, and built-ins using warm color schemes. With a 3 inch center to center drilling, it aligns with many stock cabinet lines that use this spacing on doors and drawers. The 5-1/4 inch overall length means the pull spans more of the front, which suits medium-width drawer faces where a more substantial handle is preferred. A projection of 1 inch keeps the pull from protruding excessively, which can be useful on tight walkways where fronts pass close to adjacent walls or fixtures.
The 3 inch (76 mm) center to center measurement provides a fixed drilling reference, which helps keep multiple doors and drawers aligned when laying out rows of pulls. The 1/2 inch width lets the installer position the pull on narrower stiles without interfering with panel profiles or edge details. A 5/8 inch base diameter at each end gives some forgiveness around the hole area, helping visually cover minor chipping at the drill point on wood or composite materials. The zinc die cast material provides a defined casting, which supports consistent shape and feel from pull to pull across a job. The Verona Bronze finish coordinates the color across all visible surfaces of the handle, supporting a uniform appearance when several units are mounted in the same room.
The Berenson Traditional Advantage Four pull has a 3 inch, or 76 mm, center to center dimension, which sets the spacing between mounting holes for cabinet and drawer fronts.
The Berenson 9353-10VB-P pull has a listed length of 5-1/4 inch, so it extends beyond the screw points and provides a broader gripping area on doors or drawers.
The Verona Bronze pull is made from zinc die cast, giving a metal construction that supports a solid feel during daily cabinet and drawer operation.
This cabinet pull has a 1 inch projection, setting the grip off the surface so fingers can fit behind the handle while keeping the profile relatively low.
The handle width is specified at 1/2 inch, which provides a slim bar that works on narrower fronts while still offering a defined gripping surface.
Each end of the pull has a 5/8 inch base diameter, which helps cover the area around the mounting points for a neat finished appearance.
The Berenson Traditional Advantage Four pull with Verona Bronze finish combines a 3 inch center to center drilling, 5-1/4 inch overall length, and 1 inch projection to support common cabinet layouts. Zinc die cast construction and the defined 5/8 inch bases provide a solid, finished look across multiple fronts. For projects using the Advantage Plus collection or matching Verona Bronze hardware, these dimensions and material details help this handle serve as a consistent choice across doors and drawers.
Sold In: 1 Each
