Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage Three pull gives you a 3-3/4 inch (96 mm) center to center handle that fits common cabinet drilling patterns, so swapping or laying out new fronts stays straightforward on the job. The pull is part of Berenson Corporation's Advantage Plus collection, which keeps style and sizing consistent across matching hardware runs. Its Verona Bronze finish provides a dark, muted tone, which helps tie together warm cabinet colors in kitchens, baths, or built-ins without drawing excessive attention. The pull is made from zinc die cast material, giving you a solid-feeling grip in a compact profile. Overall length is 3-11/16 inches, so it spans slightly beyond the mounting centers, covering typical wear marks around existing holes. A base diameter of 1/2 inch at each foot gives a defined landing area against the door or drawer front, helping the pull sit visually balanced. Projection of 1-3/16 inches creates usable finger clearance while keeping the handle close to the face for tighter spaces.
The 3-3/4 inch (96 mm) center to center dimension on this Berenson Transitional Advantage Three pull gives you a predictable drilling reference for doors and drawers. That spacing works well with standard cabinet boring jigs, which helps keep runs of pulls straight when you are working across multiple cabinets. The 3-11/16 inch overall length means the handle extends slightly beyond the hole spacing, so you get some forgiveness if the bores are a fraction out but still within pattern. With a projection of 1-3/16 inches, the pull stands off the surface enough for a comfortable grab while remaining close enough that it will not dominate tight galley runs or small bath vanities. A base diameter of 1/2 inch at each end helps the feet sit square to the surface, supporting an even look when installed in line with other Berenson handles.
This Berenson Transitional Advantage Three pull is designed as a 3-3/4 inch (96 mm) center to center cabinet handle, which suits standard-size kitchen and bath fronts that follow common boring patterns. The 3-11/16 inch overall length keeps the pull proportional on typical drawer widths and rail heights, so runs of hardware appear consistent from base cabinets up to uppers. Its Verona Bronze finish gives a controlled bronze tone, which pairs well with wood species and stains that lean warm, helping the hardware disappear slightly into the door or drawer face instead of reading as bright contrast. The 9/16 inch width keeps the pull visually slim, making it workable on narrow rails, small utility cabinets, or built-ins where a wider handle might crowd the stile. Zinc die cast construction supports daily use in kitchens, workrooms, or bath spaces where handles see frequent contact.
The 96 mm (3-3/4 inch) center to center spacing on the Berenson 9357-10VB-P pull ties directly into many existing jig setups, which helps keep drilling repeatable from cabinet to cabinet on larger projects. Because the pull length is 3-11/16 inches, you get a small margin beyond the holes, which can visually correct for slight layout variances while still landing the feet evenly on the surface. The 1/2 inch base diameter at each foot creates a defined circle of contact, giving a clear visual target when aligning to layout marks during installation. A projection of 1-3/16 inches gives enough stand-off for fingers to wrap behind the pull, which helps drawers open smoothly even when users have larger hands or when drawers carry heavier loads. The 9/16 inch width balances that projection, so the pull feels stable in the hand without looking oversized on medium-width drawer fronts. Combined with the Verona Bronze finish from the Advantage Plus collection, these details support a consistent look across multiple cabinets using the same part number.
The Berenson Transitional Advantage Three pull has 3-3/4 inch (96 mm) center to center spacing, which matches common cabinet drilling patterns for straightforward mounting and layout work.
The Berenson 9357-10VB-P pull measures 3-11/16 inches in overall length, so it slightly overhangs the hole spacing and helps visually cover the area around the bores.
This Verona Bronze pull is made from zinc die cast, giving a solid, single-piece cabinet handle suitable for routine opening and closing on doors and drawers.
The Advantage Plus pull projects 1-3/16 inches from the surface, providing finger clearance while keeping the handle close to the cabinet face for tighter areas.
The 3-3/4 inch cabinet pull has a Verona Bronze finish, giving a warm, dark metal look that coordinates with other bronze-colored decorative hardware.
The Berenson Transitional Advantage Three handle has a width of 9/16 inch, which keeps the profile slim while still offering a comfortable gripping surface.
The Berenson Transitional Advantage Three 3-3/4 inch (96 mm) center to center pull brings together Advantage Plus collection styling, Verona Bronze finish, and zinc die cast construction in a compact handle. With 3-11/16 inch overall length, 1-3/16 inch projection, 9/16 inch width, and 1/2 inch base diameter, it fits standard cabinet drilling and proportions. Using the specific 9357-10VB-P part number helps you repeat the same look and size across kitchens, baths, or built-ins when laying out hardware from Wurth Baer Supply.
Sold In: 1 Each
