Berenson Advantage Plus Four Verona Bronze 1-1/4" (32 mm) Diameter Knob, 9372-10VB-P

Berenson Advantage Plus Four Knob For Cabinets

Berenson Advantage Plus Four knob is a 1-1/4 inch diameter cabinet knob from Berenson Corporation that provides a defined hand grip on drawers or doors, giving installers a predictable feel when opening and closing cabinets. The knob is part of the Advantage Plus collection, aligning it with a coordinated decorative hardware family for consistent styling across a project. Its material is zinc die cast, so the knob body is formed as a solid casting, offering a stable shape that stays consistent as you mount multiple knobs along a run of doors. The finish is Verona Bronze, which establishes a dark, warm tone on the hardware surface that visually pairs with many common cabinet finishes. With a projection of 1-1/8 inch, the knob stands off the cabinet face enough for fingers to pull from different angles, which supports everyday use on both doors and drawers.

Key Verona Bronze Knob Details For Projects

• The 1-1/4 inch diameter grip area creates a round contact point that is easy to grab, which helps users operate cabinet doors and drawers without slipping across the knob face.
• A base diameter of 1-3/16 inch sets the footprint against the cabinet surface, spreading the load over a slightly wider area so the knob seats firmly when tightened against the door or drawer front.
• The 1-1/8 inch projection establishes a fixed stand-off distance from the cabinet face, allowing fingers to wrap behind the knob while keeping the profile compact for tight spaces or adjacent doors.
• The zinc die cast construction gives the knob a uniform cast form, which helps maintain consistent appearance and fit across multiple pieces installed in the same kitchen or furniture job.
• The Verona Bronze finish defines the surface color and sheen, letting installers align the hardware look with hinges, pulls, or other bronze-toned decorative components on the project.
• The specified width of 1-1/4 inch aligns with the diameter, reinforcing the round profile so layout and spacing calculations stay straightforward when planning hole locations.

Cabinet Knob Mounting And Fit Details

This knob uses an 8-32 x 1 inch screw size as its mounting interface, so the knob threads engage a standard machine screw pattern common in cabinet work, giving a secure connection into the cabinet front. The defined base diameter of 1-3/16 inch means the contact ring against the wood is predictable, helping the knob sit flat when tightened into a properly drilled hole. With a diameter and width of 1-1/4 inch, the knob face covers the immediate hole area while leaving surrounding door or drawer material visible, which supports an intentional visual balance on narrow or wider rails. The 1-1/8 inch projection sets the working depth from the door face, which helps installers anticipate clearance near adjacent hardware or wall surfaces.

Using This Berenson Knob In Real Projects

Where This Verona Bronze Knob Works Best

This Berenson Advantage Plus Four Series knob belongs to the knobs category within decorative hardware, positioning it for use on cabinet doors and drawers in woodworking projects. Its Verona Bronze finish lets it visually coordinate with other bronze-colored components in kitchens, baths, or furniture, tying hardware details together across a room. Because the knob is 1-1/4 inch in diameter, it suits doors and drawers that benefit from a moderate-size handhold, fitting both smaller vanity fronts and standard kitchen cabinet faces. The 1-3/16 inch base diameter creates a defined ring at the mounting point, which can visually frame the knob on painted or stained surfaces for a finished look. With a 1-1/8 inch projection, the knob supports comfortable pulling on thicker drawer fronts where extra reach off the face helps users get a solid grip.

Details That Support Repeatable Knob Installation

The specified 8-32 x 1 inch screw size gives installers a known thread pattern to work with, simplifying planning when hardware throughout a job follows the same standard. Zinc die cast material provides a consistent body thickness and shape from piece to piece, helping rows of knobs line up uniformly on cabinet runs. The matching 1-1/4 inch width and diameter keep the knob profile truly round, so alignment during mounting focuses on vertical placement rather than rotational orientation of a shaped face. A 1-3/16 inch base diameter defines the bearing surface on the wood, which can help distribute the pulling force over more area on softer materials. The Verona Bronze finish establishes the final surface appearance, allowing designers and installers to repeat the same look across multiple rooms using the same part number 9372-10VB-P for consistent results.

Common Questions About The Berenson Verona Knob

Selecting This Knob For Cabinet Projects

The Berenson Advantage Plus Four Series Verona Bronze 1-1/4 inch diameter knob combines zinc die cast construction, a 1-1/8 inch projection, and an 8-32 x 1 inch screw interface to deliver a defined cabinet pull point. The 1-3/16 inch base diameter and Verona Bronze finish establish both the footprint and appearance, helping projects maintain a consistent hardware look across multiple doors and drawers. For cabinet work that calls for a round 1-1/4 inch knob with these specific dimensions and finish, this 9372-10VB-P part from Wurth Baer Supply aligns the critical size, material, and thread details in one choice.