Berenson Advantage Plus Four 3" (76 mm) Center to Center Brushed Nickel Pull, 9368-1BPN-P

Berenson Advantage Plus Four Pull For Cabinets

Berenson Advantage Plus Four pull is a zinc die cast cabinet handle in a Brushed Nickel finish, so it provides a decorative look while using a sturdy metal construction for everyday cabinet and drawer use. The 3 inch (76 mm) center to center drilling sets consistent hole spacing, which supports straight, repeatable layouts across multiple doors or drawer fronts. The overall 5-1/2 inch length gives the hand extra room when grabbing the pull, which is useful on wider drawer faces. A 15/16 inch projection holds the hand away from the cabinet surface, helping fingers clear the door edge when opening. The 5/8 inch width across the grip and the 5/8 inch base diameter give a balanced feel, which can help the pull sit visually proportional on standard cabinet rails and stiles. The defined Berenson Corporation part number 9368-1BPN-P identifies this exact size and finish when ordering matching pulls.

Key Berenson Pull Details For Cabinet Work

• The 3 inch center to center dimension sets the mounting hole spacing, which matters when drilling new fronts or reusing existing 3 inch layouts in a shop or jobsite setting.
• The 5-1/2 inch overall length spans more of the drawer or door face, which helps create a visual line on wider fronts and offers more grip area for users.
• The Brushed Nickel finish provides a muted metallic appearance, which can coordinate with many hinge finishes and appliances on kitchen or bath installations.
• The zinc die cast material creates a solid-feeling pull body, which supports repeated opening and closing cycles on cabinets and drawers in regular service.
• The 15/16 inch projection spaces the handle off the door or drawer face, which gives finger clearance and reduces contact with finished surfaces during operation.
• The 5/8 inch base diameter defines the footprint at each mounting point, which helps cover standard bore marks and supports a finished look around each screw hole.

Mounting And Fit Details For This Cabinet Pull

The 3 inch center to center measurement on this Berenson Advantage Plus Four pull controls how the pull mounts, because the screw holes are fixed at that spacing along the 5-1/2 inch length. This helps match common 3 inch layouts on many cabinet doors and drawer fronts. The pull uses 8-32 x 1 inch screws according to the product data, so it is set up for typical cabinet front thicknesses where that screw length is standard. The 15/16 inch projection and 5/8 inch width work together to keep the grip away from the face while staying tight to the cabinet line, which can help on doors that swing past adjacent surfaces. The 5/8 inch base diameter at each end defines the contact area on the wood, which can help hide minor imperfections around the mounting points on replacement jobs.

Using This Brushed Nickel Pull In Cabinet Projects

Applications For 3 Inch Center To Center Pulls

This Berenson Advantage Plus Four Series 3 inch center to center Brushed Nickel pull fits cabinet and drawer applications where a 3 inch drilling pattern is used, so it suits many face-frame and frameless cabinet lines that follow that standard spacing. The 5-1/2 inch overall length gives the pull enough span to look appropriate on common base cabinets, wall cabinets, and smaller pantry doors that use paired pulls. With its zinc die cast construction, the pull is designed to serve in everyday residential or light commercial cabinet installations where metal cabinet hardware is desired. The Brushed Nickel finish works in projects that coordinate with other brushed nickel decorative hardware and moldings, supporting a consistent look across handles and pulls in the same space.

Details That Support Repeatable Cabinet Installations

The defined 3 inch center to center drilling on this 9368-1BPN-P pull aids jigs and templates, because installers can rely on a fixed spacing when laying out multiple doors and drawers in a run. The 8-32 x 1 inch screw size aligns with standard cabinet hardware tapping, which helps maintain one screw specification across many pulls on a project. The 15/16 inch projection sets a predictable standoff from the cabinet face, so clearances can be planned when doors open near walls, appliances, or adjacent cabinets. The 5/8 inch width and 5/8 inch base diameter give the pull a consistent profile along its length, helping cabinet shops standardize visual proportions across different cabinet box sizes. The Berenson Corporation branding and specific Advantage Plus Four Series designation help match this pull with other hardware from the same collection when repeating a design through kitchens, baths, or built-ins.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For Matching Cabinet Runs

The Berenson Advantage Plus Four pull with 3 inch center to center drilling, 5-1/2 inch length, and 15/16 inch projection offers a defined set of dimensions for cabinet runs using Brushed Nickel hardware. The zinc die cast construction and 5/8 inch width create a consistent grip profile that can be repeated across doors and drawers. With the specific 9368-1BPN-P part number from Berenson Corporation, it is straightforward to match this pull anywhere the same size, material, and finish are required throughout a project. For cabinet or drawer installations built around a 3 inch layout, this handle provides a clear, repeatable option.