Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This 9 inch Grass Dynapro undermount slide is built for drawer boxes with 5/8 to 3/4 inch sides — the thicker side-thickness version of the Dynapro line, bringing full-extension, soft-close performance to small drawers in face-frame and frameless cabinets alike.
Small drawers carry real loads — a spice pull-out packed to the front, an inner drawer in a stacked bank, a narrow utility drawer in a vanity. At 9 inches, this is the shortest Dynapro length in the line, and the 100 lb per pair rating means the short format does not compromise on capacity. Full extension at this length matters most in tight spaces: when the cabinet is shallow or the drawer is tucked behind a bank of larger drawers, getting every inch of the box out to the face is what makes the space actually usable. The soft-close mechanism handles the final inch of travel without any damper adjustment needed — the drawer settles shut on its own.
The zinc finish on the steel body is a functional indoor finish — durable for the cabinet interior where the slide lives concealed beneath the drawer box. The roller-bearing carriage runs quietly under load and does not require lubrication in normal use. For installation, the drawer box must be built to the Grass Dynapro specification for this length: nominal length to match the 9 inch slide, box width calculated for the 6mm side clearance, the correct bottom recess, and the rear notch and drilling for the Dynapro front locking devices. The minimum installation depth is 10-3/4 inches, so confirm the cabinet's interior depth clears that before ordering. In face-frame cabinets, the matching Dynapro rear mounting brackets are required to support the slide's back end — these brackets are Dynapro-specific and are sold separately.
Cabinet shops building drawer boxes from 3/4 inch hardwood or thicker plywood will find this the correct Dynapro model — the standard 5/8 inch version is not interchangeable. It suits both production frameless runs and traditional face-frame work, making it a practical single SKU to stock when a shop handles mixed construction. For homeowners and designers specifying a small inner drawer in a kitchen bank or a compact vanity drawer with a handle-less front, this is the concealed slide that keeps the look clean and the access complete.
Yes. This version is engineered for 5/8 to 3/4 inch drawer sides. If your box uses sides thinner than 5/8 inch, choose the standard Dynapro version for 1/2 to 5/8 inch material — the two are separate models and do not interchange.
The minimum installation depth is 10-3/4 inches. Measure the interior depth of the cabinet before ordering — a cabinet shallower than that will not accommodate the slide at full travel.
Yes, but face-frame installs require the matching Dynapro rear mounting brackets to support the back of the slide. Those brackets are sold separately and are specific to the Dynapro series — brackets from other lines will not fit.
Dynapro front locking devices are series-specific accessories sold separately. Confirm the correct locking device for this length before ordering your hardware package.
Per pair, as all undermount load ratings in this catalog are stated. One pair — left and right slide — supports up to 100 lb.
The 9 inch Dynapro in the 5/8 to 3/4 inch side-thickness version delivers the same full-extension, soft-close performance as the longer Dynapro lengths — scaled to the drawers where short, stout construction is the right call.
Sold In: 1 Set
