Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Workstation bracket 24x24 primed is a rigid, heavy duty cantilever support bracket from A and M Hardware, Inc. that provides structural support for workbenches, workstations, garage storage, ADA stations, and computer stations, helping counters and shelves carry significant loads. The 24x24 sizing identifies this bracket as a large format support, which suits deep tops or wide shelves common in workstation layouts where span and leverage are higher. A load rating at 1,000 lb per pair gives a clearly defined capacity, allowing brackets to be planned and spaced so the overall support matches the expected live and static loads on a bench, counter, or equipment station. The primed finish prepares the bracket for field finishing, so it can be painted or top-coated to match surrounding casework or shop standards while the underlying structure remains ready for service.
The workstation bracket 24x24 primed uses multiple 1/4 inch mounting holes per side, giving fixed locations for anchors into wall studs, masonry, or bench framing so the vertical and horizontal legs of the bracket engage solid structure. As a cantilever support bracket, it mounts at the wall or frame and projects under the work surface, so the load from the top transfers back into the wall instead of needing front posts. The 3 inch x 3 inch 45 degree notch on the six larger sizes helps the bracket clear wall cleats and wire runs when they share the same wall space, reducing cutting or reworking of cleats and helping trades route cables or conduits along their preferred path behind the support system.
This workstation and countertop bracket is identified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it fits directly into shop, residential, and commercial layouts where a wall-mounted support is preferred. In a workbench or workstation application, the 24x24 format supports deeper tops or tops that need more projection, helping handle tools, parts, or equipment along the full surface. In garage storage layouts, the heavy duty classification and 1,000 lb per pair load rating make the bracket suited for substantial shelving loads where bins, parts, or supplies are stacked. For ADA stations, the cantilever support design helps preserve clear space under the counter, supporting accessible layouts where under-surface obstructions must be minimized while still carrying the counter. Computer stations benefit from the same cantilevered support, giving room for cables and seating beneath the top while the bracket carries the equipment weight back to the wall or frame.
The reversible design of this bracket makes it versatile and easy to use, because a single bracket geometry can be oriented to handle right-hand or left-hand positioning without separate part types, simplifying layout on long runs. Packaged in equal quantities of rights and lefts means mirrored bracket positions can be repeated along a counter or bench, giving consistent support spacing that helps load share evenly along the structure. Multiple 1/4 inch mounting holes per side provide several anchor locations in both the vertical and horizontal legs, allowing installers to align holes over strong wall or bench structure and use more fasteners when higher loads are expected. The 3 inch x 3 inch 45 degree notch on the six larger sizes gives a defined clearance zone for wall cleats and wire runs, which helps keep the bracket from conflicting with backer cleats or electrical pathways when repeating the same layout across several stations. The defined load rating at 1,000 lb per pair establishes a clear performance reference, allowing planners to repeat bracket spacing from one station to the next with confidence that each pair is designed for the same load.
The workstation bracket 24x24 primed has a load rating at 1,000 lb per pair, so every two brackets are designed to carry that specified weight when installed into suitable structure.
The cantilever support brackets carry the counter from the wall side, which opens space under workbenches, ADA stations, or computer stations for legroom, storage, and cable routing.
The 24x24 primed workstation bracket is described for workbenches, workstations, garage storage, ADA stations, and computer stations, aligning with shop, residential, and commercial counter or shelf projects.
The multiple 1/4 inch mounting holes per side offer several fastener locations, helping spread load across anchors and line up with solid framing or structural members during installation.
The six larger sizes feature a 3 inch x 3 inch 45 degree notch that allows clearance for wall cleats and wire runs, reducing conflicts with backing or conduit during layout.
The reversible design and equal quantities of rights and lefts support mirrored bracket positions along countertops, giving consistent support spacing for repeatable workstation or storage runs.
The workstation bracket 24x24 primed from A and M Hardware, Inc. is a rigid, heavy duty cantilever support bracket with a load rating at 1,000 lb per pair, matching the demands of workbenches, workstations, garage storage, ADA stations, and computer stations. Multiple 1/4 inch mounting holes per side and a reversible design support straightforward installation and layout, while the 3 inch x 3 inch 45 degree notch on the six larger sizes provides clearance for wall cleats and wire runs. For projects that call for workstation and countertop brackets with defined capacity and flexible mounting options, this 24x24 primed configuration offers a clear structural role.