Rev-A-Shelf 4WCSD 12" Maple Bottom Mount Waste Pullout with 1-35 Quart Silver Bin Soft-Close, 4WCSD-1535DM-1

A Maple-Finished Waste Pullout Built for a 12-Inch Base Cabinet

This Rev-A-Shelf 4WCSD waste pullout brings a 35 quart silver bin behind a base cabinet door, riding out on full-extension, soft-close slides with a maple-finished carriage that fits neatly into a 12-inch opening.

Key Features

• Prefinished maple carriage coordinates with natural wood interiors and standard cabinet finishes without additional painting or staining.
• One 35 quart silver bin included ships ready to hold household waste or recyclables from day one.
• Soft-close, full-extension slides bring the bin all the way forward and guide it back with a controlled, quiet close.
• 135-pound weight capacity handles a loaded bin and the demands of daily kitchen use.
• Door-mount compatible so the bin rolls out when the cabinet door is pulled open.
• Minimum cabinet opening of 12 inches wide, 19-3/4 inches tall, and 22-1/2 inches deep sets the fitment requirement for this unit.

Putting Waste Out of Sight in a Compact Run

In a kitchen where every inch of base cabinet is accounted for, a 12-inch opening is often the only space left for a dedicated waste bin. This pullout fills that space cleanly: the bin rolls all the way forward on full-extension slides so the bottom of the bin is accessible, and the soft-close mechanism keeps the closing motion quiet even under load. Connecting the carriage to the cabinet door means a single pull opens everything in one motion, and the bin disappears again when the door closes.

Maple Finish and Carriage Construction

The carriage arrives prefinished in maple, which is a practical advantage in a cabinet environment where raw or painted metal can look out of place against wood interiors. The silver bin pairs with the maple finish without competing for attention. Because the carriage is prefinished, it installs as-is, without shop time for staining or finishing to match the surrounding cabinetry. The 4WCSD series is built around a bottom-mount configuration, so the slides anchor to the cabinet floor and the bin sits on the carriage above them.

Where This Pullout Fits

This unit suits a kitchen renovation or new build where the cabinet run includes a narrow 12-inch base cabinet designated for waste, and where the interior finish detail matters as much as the function. Cabinet shops specifying a complete kitchen package, designers finishing a wood-tone interior, and homeowners replacing an older waste solution with something quieter and better-looking are the buyers who will get the most from the maple finish and soft-close motion combination. The door-mount bracket ships with the unit, so no additional bracket hardware is needed to attach the bin to the door. Confirm the cabinet dimensions against the minimum opening specs before ordering, since the unit is designed for this specific opening profile.

Common Questions

Clean Finish, Quiet Motion, Right-Sized for a Narrow Cabinet

Choose this pullout to put a 35 quart bin behind a 12-inch cabinet door in a maple-finish carriage with soft-close slides that keep daily use quiet and controlled.