
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf trash bin lid is a replacement lid for selected Rev-A-Shelf RV Series waste containers. This waste bin lid is silver and is listed for use with 35 quart and 50 quart containers. The product name identifies it as a lid for 35 quart silver trash bins, and the verified web description confirms broader use with both container sizes in the series. For buyers matching a rev a shelf cabinet waste basket or trash can setup, this part helps cover the container while keeping the look consistent with the bin. It is important to note that this lid adds height to RV Series waste containers. Rev-A-Shelf recommends adding 1 inch to the product height when measuring cabinet space, especially in a garbage pullout application.
Key specs to confirm: This waste bin lid is a Rev-A-Shelf RV Series accessory with verified dimensions of 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. The web description states it is for use with 35 quart and 50 quart containers, and the product name identifies the 35 quart silver trash bin application. Before ordering, confirm your existing container is part of the RV Series and verify the container size you are using. Because the lid adds height to the waste container, Rev-A-Shelf recommends adding 1 inch to the overall product height when measuring cabinet clearance. Any unlisted compliance, load, or safety details should be confirmed with the manufacturer or technical documentation.
What's included: One silver waste bin lid, sold each.
What to verify before ordering: Confirm your container series, whether your bin is 35 quart or 50 quart, the lid dimensions needed, and available cabinet height after adding 1 inch. If the bin is installed in a pull-out frame or behind a door, check that the lid will not interfere with cabinet components during use.
Buyers usually shop for this type of part when the original lid is missing, damaged, or no longer matches the existing cabinet waste setup. In a kitchen, utility room, or bath cabinet, a replacement waste bin lid can help keep the container covered while preserving the intended fit of the existing Rev-A-Shelf system. For a professional installer, that means less disruption when the bin itself is still usable. For a serious DIY buyer, it means replacing a single accessory instead of starting over with a full waste basket assembly.
This Rev-A-Shelf replacement bin lid is clearly positioned as an RV Series accessory. The verified description states that it works with 35 quart and 50 quart containers, which is the main compatibility point buyers need to confirm first. If you are using a cabinet trash can in a garbage pullout, the most important planning detail is vertical clearance. The manufacturer notes that these lids add to the height of RV Series waste containers and recommends adding 1 inch to the product height during measurement. That single detail matters in tight cabinet openings, under fixed shelves, and in installations where door hardware or pull-out frames already limit space.
The verified dimensions also help narrow fit before purchase. A 14 inch width, 7/8 inch height, and 10-1/4 inch depth give buyers a concrete reference for checking the lid against the bin opening and surrounding cabinet interior. If you are working from an older rev a shelf or revashelf setup, compare those dimensions to the existing container rather than assuming all waste basket lids in the brand fit the same way. If your installation includes a pull-out frame, confirm that the lid clears the frame and cabinet opening in both open and closed positions.
This product is especially useful when the goal is to maintain an existing cabinet organization system with a verified replacement accessory. The silver finish can also matter when the visible bin and lid need to stay matched. If your project involves a trash can or waste basket in a concealed cabinet application, this lid is best approached as a fit-specific part, not a universal cover. Confirm the series, confirm the quart size, and confirm the added height before ordering.
When buyers compare replacement lids, the main difference is usually not appearance alone but whether the part is clearly tied to a known container series and size. This Rev-A-Shelf waste bin lid provides that kind of product identity. It is sold as a replacement accessory in the RV Series, and the verified description states use with 35 quart and 50 quart containers. That gives installers and maintenance buyers a more reliable starting point than a generic lid with unclear fit notes.
Another useful distinction is dimensional clarity. Here, the width, height, and depth are listed, and the manufacturer also states that the lid adds 1 inch to the height of the waste container setup. For cabinet projects, that extra measurement note is often as important as the lid size itself. A lid that physically matches the bin can still create issues if the cabinet opening or pull-out area lacks enough clearance. Having that guidance upfront helps buyers avoid fit problems in a garbage pullout or built-in trash can location.
Brand consistency also matters when replacing parts in an existing system. A buyer already using a Rev-A-Shelf waste container may prefer a matching replacement bin lid because it is intended for the same series rather than an unspecified alternative. That does not remove the need to verify fit, but it does support a cleaner parts-matching process. The practical comparison point is simple: choose a replacement lid with verified series use, verified dimensions, and a clear note about added height. Those details are what support a smoother install and fewer ordering errors.
This Rev-A-Shelf waste bin lid is identified for 35 quart silver trash bins, and the web description also states use with 35 quart RV Series containers.
This waste bin lid is stated in the verified web description to be for use with 35 quart and 50 quart containers in the RV Series.
This Rev-A-Shelf lid adds height to the waste container, and the manufacturer recommends adding 1 inch when measuring cabinet space.
This silver trash bin lid measures 14 inches wide, 7/8 inch high, and 10-1/4 inches deep.
This product is a Rev-A-Shelf replacement bin lid only, listed in the Replacement Bins and Accessories class.
This waste bin lid is packed and sold each, so one order includes one lid.
This lid can be used in a garbage pullout if the RV Series container matches and cabinet clearance is checked with the added 1 inch height.
This replacement waste basket lid should be matched by RV Series fit, container quart size, lid dimensions, and cabinet clearance. Follow manufacturer installation guidance and local building requirements where applicable.
35 quart trash bin lid purchases go more smoothly when you confirm the container series, quart size, and cabinet clearance first. This Rev-A-Shelf replacement part is a silver waste bin lid sold individually and listed for use with 35 quart and 50 quart RV Series containers. Before purchase, verify the 14 inch by 7/8 inch by 10-1/4 inch lid size against your existing bin and remember to add 1 inch to the overall height for fit planning. That check is especially important for cabinet trash can and pull-out applications.
Sold In: 1 Each