Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 5349 series waste pullout pairs an aluminum bottom-mount carriage with two 35 quart white bins and soft-close slides, putting a full-size two-bin system behind a base cabinet door.
Putting trash and recycling in the same pull-out is a practical arrangement for most kitchens, but it only works when the carriage is wide enough to hold both bins at full depth and still roll out cleanly. This unit does that: the two 35 quart bins sit side by side on the carriage, and the full-extension slides bring the whole assembly out past the cabinet face so the bins at the back are just as easy to reach as the ones at the front. The door-mount hardware connects the carriage to the cabinet door, so opening the door pulls the unit forward automatically.
The carriage is aluminum, which keeps the frame rigid under load without adding unnecessary weight to the moving assembly. Soft-close slides take over in the last inch or two of travel, bringing the loaded carriage to a controlled stop rather than a hard slam. That matters more with a double-bin unit than a single, because 90 pounds of filled bins at speed will register throughout the cabinet run. The white bins contrast cleanly against the aluminum frame and lift out of the carriage for emptying or liner swaps.
This pullout is the right choice for a kitchen renovation or cabinet shop build where the client wants two separate bins behind one door and has the cabinet opening to support it. The minimum cabinet opening is 15 inches wide, 22-1/8 inches deep, and 19-1/2 inches tall; a cabinet that meets all three of those dimensions can take this unit. It also fits a range of contractor installs where the spec calls for soft-close waste hardware and a finished aluminum look rather than a painted or coated carriage. For a single-bin layout or a narrower opening, a different configuration in this series is the better fit.
Two 35 quart white bins are included. Check the product listing for lid availability, as lids may be sold separately depending on the configuration.
The minimum opening is 15 inches wide, 22-1/8 inches deep, and 19-1/2 inches tall. All three dimensions need to clear before ordering.
The unit is door-mount compatible, but confirm whether the door-mount bracket ships with this SKU or is sold separately before completing the install plan.
Yes. The slides extend fully so both bins clear the cabinet face completely when the unit is open.
When the cabinet has the opening and the job calls for two bins behind one door, this aluminum-frame soft-close pullout delivers the capacity, the controlled motion, and the finished look to do it right.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSRV-35-LID-1 Mfr# RV-35-LID-1 | Rev-A-Shelf RV Series 35 quart White Trash Bins Lids, 14"W x 7/8"H x 10-1/4"D - RV-35-LID-1 |
