Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf waste pull-out gives cabinet-based trash storage with a fully assembled aluminum frame, two 50 quart white bins, and soft-close operation. This bottom mount trash pullout is part of the Rev-A-Shelf 5349 series and is designed for buyers who want a clean, built-in garbage pull out instead of a freestanding waste basket. The frame installs with four screws, and the heavy-duty extruded aluminum construction helps reduce side-to-side play during use. Soft-close slides are rated at 100 lb according to Rev-A-Shelf product data. Built-in door mount brackets are included in the frame design, while door mount extensions are sold separately. For installers comparing a garbage pullout or cabinet trashcan setup, this model focuses on smooth travel, simple mounting, and organized two-bin capacity.
Key specs to confirm: This Rev-A-Shelf bottom mount trash pullout is listed at 14-13/16 inches in the product name and 14.81 in the product URL and SAP description, so buyers should confirm cabinet opening width and interior clearance before ordering. Verify that your cabinet can accept a bottom-mounted pull-out frame, two 50 quart bins, and the travel space needed for soft-close slides. Because this is a door-mount-ready unit, confirm your door attachment plan and whether door mount extensions are needed. If you need exact depth, height, or replacement part dimensions, confirm those details with manufacturer technical documentation before purchase. Any additional load, compliance, or installation details beyond the stated 100 lb slide rating should also be confirmed with the manufacturer.
What's included: One fully assembled Rev-A-Shelf 5349 waste pull-out frame, two 50 quart white bins, built-in door mount brackets, and soft-close slides. Replacement bins are sold separately. Door mount extensions are sold separately.
What to verify before ordering: Confirm cabinet opening size, interior depth and height, bottom panel condition for mounting, door attachment method, and whether your installation requires door mount extensions. Also confirm that the cabinet layout allows full pull-out travel with the bins installed.
This Rev-A-Shelf trash pull-out fits buyers who want hidden waste storage in a kitchen or bath cabinet and need a practical way to keep bins off the floor. A common use case is a remodel or new cabinet install where the owner wants one pull-out for trash and recycling. In that setting, the two 50 quart white bins provide separated capacity inside the cabinet, while the bottom mount trash pullout format keeps the frame anchored to the cabinet floor.
Installers often look for a garbage pull out that does not require field assembly. This 5349 unit comes fully assembled and installs with four screws, which can simplify jobsite planning. The built-in door mount brackets also matter when a buyer wants the cabinet door to move with the unit rather than reaching inside to pull a loose waste basket. If your cabinet or door layout needs extra offset, Rev-A-Shelf states that door mount extensions are sold separately, so that point should be checked before ordering.
Another common pain point is wobble during operation. Rev-A-Shelf states that the soft-close slides eliminate side-to-side play, which helps the pull-out feel more controlled as it opens and closes. Buyers who use a cabinet trashcan every day may also value the soft-close action because it helps reduce abrupt closing. The slides are rated at 100 lb in the verified product data, which gives a clear reference point for the slide system itself.
For replacement planning, this revashelf 5349 waste pull-out also gives a practical path because replacement bins are sold separately. That is useful when the frame and slides remain in service but the bin needs to be swapped. Before ordering for a retrofit, buyers should still confirm interior cabinet measurements, mounting surface condition, and door clearance because exact fit depends on the cabinet, not just the pull-out series.
When buyers compare cabinet waste systems, the main differences usually come down to mounting style, frame construction, how much assembly is required, and whether the unit supports door mounting. This Rev-A-Shelf waste pull-out is clearly positioned as a bottom-mounted unit with a fully assembled frame, so it suits projects where installers want a direct cabinet-floor installation rather than piecing together multiple loose components.
The heavy-duty extruded aluminum frame is a meaningful build detail because it describes the core structure of the product, not just the finish. The brushed aluminum waste bin carriage finish also supports a clean interior look that matches the frame style. For buyers who prioritize movement quality in a garbage pullout, the verified soft-close slides and the stated reduction of side-to-side play are useful details because they address daily operation directly.
Another comparison point is serviceability. Since replacement bins are sold separately, the owner may be able to replace worn bins later without replacing the full trash can pullout assembly. The built-in door mount brackets also reduce the need to source a separate basic door-mount interface, although buyers should note that door mount extensions are separate items.
For consistency, this product data gives several concrete facts a buyer can use: two 50 quart white bins, bottom mount installation, soft-close slides rated at 100 lb, and installation with four screws. If you are comparing options for a cabinet waste basket setup, those are the details to weigh first, along with your actual cabinet opening and door configuration.
This Rev-A-Shelf waste pull-out fits cabinets that can accept a bottom-mounted frame, two 50 quart bins, and the listed 14-13/16 inch product width. Confirm full interior clearance before ordering.
This bottom mount trash pullout comes fully assembled according to Rev-A-Shelf product data.
This garbage pull out installs with four screws on the cabinet bottom. Follow manufacturer installation guidance and local building requirements where applicable.
This trash can pullout includes two 50 quart white bins.
This Rev-A-Shelf trash pull-out has built-in door mount brackets in the frame. Door mount extensions are sold separately if your install requires them.
This garbage pullout uses soft-close slides rated at 100 lb in the verified product data.
This 5349 waste pull-out uses soft-close slides that Rev-A-Shelf states eliminate side-to-side play.
This Rev-A-Shelf unit has replacement bins sold separately, so bin replacement can be planned without replacing the full frame.
This trashcan pullout requires confirmation of cabinet opening width, interior depth, interior height, bottom mounting surface, and door clearance for full slide travel.
Rev-A-Shelf trash pull-out is a practical choice when you need a fully assembled bottom-mounted frame with two included 50 quart bins and soft-close slides. Before purchase, confirm your cabinet opening, interior clearance, mounting surface, and door connection needs. This model includes built-in door mount brackets, while door mount extensions and replacement bins are separate items. Checking those fit details first helps you order the right garbage pull out for a clean cabinet installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSRV-50-LID-1 Mfr# RV-50-LID-1 | Rev-A-Shelf RV Series 50 quart White Trash Bins Lids, 14-3/4"W x 7/8"H x 14-3/4"D - RV-50-LID-1 |
