Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 5349 series waste pullout fits two 27-quart silver bins inside a narrow base cabinet on a full-extension, soft-close bottom-mount slide, so both bins roll out completely for easy emptying and roll back in without slamming.
A split waste-and-recycling setup usually means two separate under-sink solutions or a cabinet given over entirely to a single bin. This pullout puts both functions in one 12-inch minimum opening, side by side on a single carriage. The full-extension slides bring both bins completely out of the cabinet so nothing stays hidden at the back and liners drop straight in. For kitchen renovations where a recycling bin and a trash bin need to share one base cabinet, this is the direct path to a clean, sorted setup without sacrificing a second cabinet run.
The carriage is finished in aluminum, a neutral metallic that sits well next to stainless steel appliances, brushed nickel pulls, or chrome fixtures without competing with them. The two 27-quart bins are silver and ship with the unit. The soft-close mechanism does its work on the closing stroke: it catches the carriage just before it seats and pulls it in gently, so a loaded double bin does not slam the cabinet frame. That controlled close matters more in a high-use kitchen than it might seem, especially with two bins sharing the weight load across a 90-pound rated slide.
This unit is sized for a base cabinet with a minimum clear opening of 12 inches wide, 22-3/8 inches deep, and 19-1/8 inches tall. It is well suited to a kitchen remodel or new build where a designer or cabinet shop needs a double-bin waste solution in a compact run, and where the aluminum finish ties the interior hardware together with the exterior appliances. The door-mount option lets the bins ride the door outward for hands-free access, which is worth specifying in a busy prep kitchen. Contractors building out full kitchens and designers specifying Rev-A-Shelf across a project will find this a natural complement to other 5349 series pieces.
Yes. Two 27-quart silver bins are included. Check the product listing for lid availability for this configuration, as lids may be offered separately depending on the accessory option selected.
The cabinet needs a minimum clear opening of 12 inches wide, 22-3/8 inches deep, and 19-1/8 inches tall. Measure all three before ordering, since depth and height are as important as width for this unit.
The carriage is door-mount compatible, but door-mount brackets are sold separately. Select the appropriate bracket for the 5349 series when adding the door-mount option to the install.
On a bottom-mount unit, the slides attach to the cabinet floor beneath the carriage rather than to the cabinet side walls. This keeps the full bin opening clear at the top and works well in cabinets where side-wall mounting is not practical.
Choose this pullout to put a trash-and-recycling pair in one narrow base cabinet, with an aluminum-finish carriage that ties into contemporary kitchens and soft-close slides that hold up through daily use.
Sold In: 1 Each
