
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf trash bin lid is a white replacement lid made for use with 35 and 50 quart containers in the RV Series. This waste bin lid is manufactured by Rev-A-Shelf Corporation and is sold each. For buyers replacing a worn cover on a cabinet waste basket or setting up a cleaner-looking garbage pullout, this lid gives a direct accessory option tied to the matching series. The verified dimensions are 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. The product description also notes that this lid adds height to RV series waste containers, so cabinet clearance should be checked before ordering. If your rev a shelf or revashelf cabinet setup is tight on vertical space, plan for the added height before installation.
Key specs to confirm: This white waste bin lid measures 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. It is listed for use with 35 and 50 quart RV Series containers. The product description also states that the lid adds to the overall height of RV series waste containers, and recommends adding 1 inch to the product height when measuring the cabinet. For a proper fit, confirm the exact container series, the container quart size, the top rim shape, and the available cabinet clearance above the bin. Safety, load, compliance, and any unlisted installation details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf white waste bin lid, sold each. No complete bin, frame, slide system, or mounting hardware is verified as included.
What to verify before ordering: Confirm that your container is an RV Series bin, that it is a 35 quart or 50 quart container, and that the top dimensions match this lid. Check cabinet height carefully because the lid adds about 1 inch to the waste container height. If you are replacing a lid in a garbage pullout, verify that the pull-out frame and door clearance still allow smooth operation.
This product fits a common replacement need in kitchen and bath cabinet waste systems. A buyer may already have an RV Series pull-out setup and only need a new lid after years of use, a lost part, or a bin refresh. In that case, a verified replacement accessory is often more practical than changing the full waste container assembly. This Rev-A-Shelf replacement bin lid is intended for use with 35 and 50 quart containers in the RV Series, which helps narrow the match for existing cabinet systems.
Another common use case is a cabinet with a garbage pullout where odor control and a neater top surface matter. A waste bin lid can help cover the opening when the bin is in place, but this specific product also changes the overall height of the container. That matters in base cabinets with limited room under a fixed shelf, countertop support, or pull-out frame. The verified note recommends adding 1 inch to the product height when measuring your cabinet. That single detail can prevent ordering mistakes in tight spaces.
Buyers replacing a waste basket lid should also look beyond quart size alone. The listing gives exact lid dimensions of 14 inches wide, 7/8 inch high, and 10-1/4 inches deep. Those measurements should be compared to the actual top of the existing bin, especially if the original container has been swapped at some point. If your rev a shelf setup has been modified, or if you are working from an older installation, confirm the bin series before purchase rather than relying only on memory.
This product can also make sense for service work and maintenance stock. Installers, property managers, and shop teams often keep replacement parts for common cabinet trashcan systems. Since this lid is sold each, it can be ordered in the quantity needed for one bin or several matching bins. When the application is a cabinet pull-out, verify that the lid does not interfere with door movement, slide travel, or upper cabinet obstructions.
When buyers compare replacement lids, the main differences usually come down to series fit, exact dimensions, color, and cabinet clearance. This Rev-A-Shelf trash bin lid gives clear verified data in those areas. It is identified as an RV Series accessory, it is white, and it is sized at 14 inches by 7/8 inch by 10-1/4 inches. It is also specifically stated for use with 35 and 50 quart containers. That makes it easier to compare against the container already in service.
Generic replacement lids may appear similar in photos, but cabinet waste systems often depend on matching the top profile of the original bin. A small difference in rim shape or lid footprint can create a poor fit. Here, the brand and series identification help buyers stay aligned with the intended product family. For a professional installer or serious DIY buyer, that reduces guesswork during replacement planning.
The cabinet-height note is also important in a comparison. Not every lid listing clearly states how the accessory affects total bin height. This one does. If your cabinet opening is close, that detail should carry real weight in the decision. A white trash can lid that fits the bin but causes interference in the cabinet is still the wrong part. Buyers should compare not only the lid dimensions, but also the installed height impact on the full waste container setup.
For consistency across multiple jobs, using a verified Rev-A-Shelf accessory can also simplify ordering and maintenance records. The part is identified as a replacement accessory rather than a full waste system, and the manufacturer part number can be used to confirm the exact item with purchasing or service teams when needed.
This Rev-A-Shelf waste bin lid is listed for use with 35 quart RV Series containers, so buyers should confirm the bin series and top dimensions before ordering.
This Rev-A-Shelf trash bin lid is also listed for use with 50 quart containers in the RV Series.
This white trash can lid measures 14 inches wide, 7/8 inch high, and 10-1/4 inches deep.
This waste bin lid adds to the height of RV Series waste containers, and the product note recommends allowing 1 inch of added height.
This Rev-A-Shelf replacement bin lid should be measured with cabinet clearance in mind, especially in a garbage pullout with limited vertical space.
This product is verified as a waste bin lid sold each. A complete bin or pull-out system is not listed as included.
This Rev-A-Shelf waste basket lid is white.
This lid is intended for RV Series waste containers, which are commonly used in cabinet applications, but buyers should confirm their exact container setup.
This replacement lid should be matched by RV Series compatibility, quart size, top rim dimensions, and cabinet height clearance.
This product listing does not provide compliance or code details. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf replacement bin lid is a straightforward choice when you need a white lid for a matching RV Series 35 quart or 50 quart container. Before purchase, confirm the lid dimensions, your exact bin series, and the cabinet clearance above the container. This item is sold each and is verified as the lid only, not a complete waste basket or pull-out assembly. Careful fit checks help avoid problems with garbage pullout travel, top clearance, and replacement-part mismatches.
Sold In: 1 Each