
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pullout gives cabinet waste storage a built-in format with a fully assembled aluminum frame and two 35 quart silver bins. This bottom mount waste pullout from Rev-A-Shelf is part of the 5149 Series and includes Rev-A-Motion soft-open and soft-close action for smoother daily use. For buyers replacing a basic waste basket pullout or planning a cleaner garbage pullout layout, this model is designed to install with four screws and includes built-in door mount brackets in the frame. The unit is rated at 150 lb, which helps support repeated kitchen use. Buyers considering a trash can pullout for trash and possible recycling should confirm cabinet fit before ordering.
Key specs to confirm: This Rev-A-Shelf bottom mount waste pullout is listed at 14-3/16 inches and includes two 35 quart silver bins. It uses an aluminum frame, installs with four screws, includes built-in door mount brackets, and is rated at 150 lb. Before purchase, confirm your cabinet opening, interior depth, interior height, and door mounting needs so the pull out trash can fits your application. If you need door mount extensions, note that they are sold separately. Safety, compliance, and any unlisted dimensional clearances should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf 5149 Series waste pullout frame and two 35 quart silver bins are verified as included. Built-in door mount brackets are part of the frame.
What to verify before ordering: Confirm cabinet width and inside clearance for a 14-3/16 inch unit, check whether your door setup works with the built-in brackets, verify if extensions are needed, and confirm whether you want this dual-bin layout for trash only or trash and recycling.
This pull out trash can fits buyers who want cabinet-contained waste storage without piecing together separate slides, bins, and brackets. A common use case is a kitchen remodel where the owner wants a cleaner look and easier access than a freestanding trash can. In that setting, a Rev-A-Shelf waste pullout can keep waste bins inside the cabinet while still giving direct access through a pull-out frame.
Another practical scenario is replacing an older waste basket pullout that does not close smoothly or requires more assembly time. The 5149 Series is shipped fully assembled, and the product data states it installs with four screws. That can help installers reduce setup steps compared with systems that need more field assembly. The built-in door mount brackets also matter for buyers who want the cabinet door tied into the pullout frame rather than opening the door first and then reaching for a separate slide unit.
This soft-close trash pullout also suits kitchens where repeated daily use makes motion control important. Rev-A-Motion soft-open and soft-close is a verified feature for this model. That means buyers looking for a more controlled pullout action can focus on this series instead of a basic non-dampened garbage pullout. The dual 35 quart bin layout is useful for homes that want one side for waste and the other for recycling pullout use, although exact local recycling needs vary by household.
Because this is a bottom mount waste pullout, fit planning matters. Buyers should confirm cabinet interior dimensions, door attachment needs, and whether door mount extensions are required, since those extensions are sold separately. If your project has unusual face frame conditions, special door styles, or limited interior depth, verify those details before ordering rather than assuming series compatibility.
When buyers compare cabinet trash pullouts, the most useful differences are often assembly level, mounting style, bin format, and door connection method. This Rev-A-Shelf trash pullout stands out in practical terms because the verified product data combines a fully assembled frame, bottom mount installation, built-in door mount brackets, and soft-open and soft-close action in one unit. For installers and cabinet shops, those details can make product selection easier because the key installation approach is already defined.
Another point buyers often compare is bin arrangement. This model includes two 35 quart silver bins, which gives a clear starting point for either divided waste handling or a trash can pullout paired with recycling. Some buyers only need a single-bin setup, while others want dual containers from the start. This product is specifically a two-bin format, so it is a better match for buyers who want separation inside one cabinet opening.
Material and maintenance also affect long-term value. The verified data lists an aluminum frame and notes that replacement bins are sold separately. That helps support future upkeep because bin replacement does not require replacing the full frame. The series also notes silver and stainless steel waste bin availability, but this exact model includes silver bins. Buyers who need a different appearance should confirm the exact finish and included bin type before purchase.
Finally, this product gives buyers a confirmed 150 lb rating, which is an important specification for a cabinet pullout that will be opened and closed often. If your project requires additional technical details such as exact clearances, side spacing, or specialty door mount conditions, those should be checked with current manufacturer documentation before finalizing the order.
This Rev-A-Shelf waste pullout requires cabinet dimensions that match the 14-3/16 inch unit size and the needed interior clearance. Follow manufacturer installation guidance and local building requirements where applicable.
This pull out trash can includes two 35 quart silver bins with the fully assembled frame.
This bottom mount waste pullout installs with four screws according to the verified product data.
This garbage pullout includes built-in door mount brackets as part of the frame.
Door mount extensions are sold separately, so buyers should confirm whether the standard built-in brackets are enough for their cabinet door setup.
This soft-close trash pullout includes Rev-A-Motion soft-open and soft-close action.
This waste basket pullout has two 35 quart bins, so many buyers use one bin for trash and one for recycling.
This Rev-A-Shelf trash pullout uses an aluminum frame.
Replacement bins are sold separately for this Rev-A-Shelf waste pullout series.
This trash can pullout requires confirmation of cabinet opening, interior clearance, door mount needs, and whether extensions are needed. Follow manufacturer installation guidance and local building requirements where applicable.
Buyers often focus first on bin size, but fit is usually the deciding factor for a cabinet waste pullout. Confirm the cabinet opening for a 14-3/16 inch unit, check inside depth and height, and review how the cabinet door will attach to the built-in brackets. If your project needs added door mount reach, verify whether separate extensions are required. Also confirm that the included two 35 quart silver bins match your intended trash and recycling layout before purchase.
Rev-A-Shelf waste pullout buyers should focus on cabinet fit, mounting method, and included components before placing the order. This model includes a fully assembled aluminum bottom mount frame, built-in door mount brackets, and two 35 quart silver bins with Rev-A-Motion soft-open and soft-close action. Confirm that your cabinet can accept the 14-3/16 inch unit, check whether door mount extensions are needed, and verify the dual-bin layout matches your trash or recycling plan so the installation goes smoothly.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSRV-35-LID-17-1 Mfr# RV-35-LID-17-1 | Rev-A-Shelf RV Series 35 quart Silver Trash Bins Lids, 14"W x 7/8"H x 10-1/4"D - RV-35-LID-17-1 |