Rev-A-Shelf 5149 14-3/16" Aluminum Bottom Mount Waste Pullout with 2-35 Quart White Bins Soft-Close, 5149-18DM-211

Rev-A-Shelf 5149 Double-Bin Waste Pullout Built for a Mid-Size Base Cabinet

This Rev-A-Shelf 5149 Series pullout brings two 35 quart white bins behind a base cabinet door, rolling out on an aluminum bottom-mount carriage with soft-close for a controlled close every time.

Key Features

• Two 35 quart white bins included ship with the carriage, ready to use for trash and recycling separation.
• Soft-close motion slows and completes the closing travel so the unit never slams.
• Over-travel extension pushes both bins fully clear of the cabinet face for unobstructed access.
• Aluminum carriage finish provides a clean, durable frame that pairs with a range of cabinet interiors.
• Door-mount compatible so the pullout rolls out when the cabinet door opens.
• 150 pound weight capacity handles a fully loaded pair of bins without flexing.

Two Bins, One Pull

Separating waste from recycling is simpler when both bins are in the same cabinet and roll out together. The over-travel extension on this pullout carries both 35 quart bins past the cabinet face, so the rear bin is just as easy to reach as the front one. That matters most in a busy kitchen where one hand is already holding something: the door swings open, the bins follow, and neither requires a separate reach into the cabinet interior.

Aluminum Frame, Soft-Close Slides

The carriage is finished in aluminum, a neutral, professional look that does not compete with cabinet interiors. The soft-close slide mechanism engages at the end of every closing stroke, drawing the loaded carriage in quietly and stopping it flush, so repeated closing under load does not loosen the mounting or rattle the door bracket. The carriage arrives fully assembled and fastens to the cabinet floor, with a door-mount bracket included so the unit ties to the cabinet door.

Where This Pullout Fits

This is the right unit for a mid-size base cabinet dedicated to waste and recycling. The minimum cabinet opening is 14-1/2 inches wide, 20 inches tall, and 22 inches deep, so measure the clear interior before ordering. Cabinet shops specifying kitchen packages will find the 5149 Series a reliable mid-tier option: assembled, hardware-included, and available in configurations that cover a range of cabinet widths. Designers specifying separation at the source can call this out as a two-stream unit without adding a second pull location to the plan.

Common Questions

Organized, Quiet, and Built to Last

Choose the Rev-A-Shelf 5149 for a mid-size base cabinet where two-stream waste separation, a soft-close finish, and an over-travel extension that clears both bins matter more than a bare-bones carriage.