Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pullout gives cabinet-based waste storage with a fully assembled aluminum frame, two 50 quart silver bins, and Rev-A-Motion soft-open and soft-close operation. This bottom mount waste pullout is made by Rev-A-Shelf Corporation for kitchen and bath cabinet accessory use. It installs with four screws, which helps simplify setup for a professional installer or a serious DIY buyer. The frame includes built-in door mount brackets, so the pull out trash can is designed to support a cabinet door attachment approach without adding a separate bracket system. Buyers using a garbage pullout for everyday trash and recycling bins can also note that replacement bins are sold separately and door mount extensions are sold separately.
Key specs to confirm: This Rev-A-Shelf bottom mount waste pullout is listed at 15-5/8 inches and includes two 50 quart silver bins. Buyers should confirm cabinet opening width, interior depth, interior height, and door-mount alignment before ordering. Because this is a bottom mount unit, verify that the cabinet floor is suitable for mounting with four screws. The product data verifies a 150 lb rating for the unit, but any additional safety, compliance, or installation details not shown here should be confirmed with the manufacturer or technical documentation.
What's included: A fully assembled aluminum waste pullout frame with built-in door mount brackets and two 50 quart silver bins is verified. Replacement bins and door mount extensions are sold separately.
What to verify before ordering: Confirm the cabinet opening can accept a 15-5/8 inch unit, check that the cabinet base allows bottom mounting, verify your door attachment method, and review whether you need optional door mount extensions for your installation.
A soft-close trash pullout fits buyers who want waste storage inside a cabinet instead of leaving a freestanding trashcan in the open. In a kitchen, the dual-bin layout can support one bin for garbage and one bin for recycling bins. In a utility area, the same format can help separate waste streams while keeping the floor clear. Because this Rev-A-Shelf waste pullout is fully assembled, it can save time when replacing an older waste basket pull out or when adding a new cabinet organizer during a remodel.
The bottom mount format matters in real installations. A cabinet installer can secure the frame with four screws to the cabinet floor, then align the cabinet door using the built-in door mount brackets. That built-in bracket detail helps when the goal is a cleaner front appearance and a direct pull from the cabinet door. If the cabinet layout needs more reach or spacing at the door, door mount extensions are sold separately, so that detail should be checked before ordering rather than assumed.
Daily use also depends on motion control. The verified Rev-A-Motion soft-open and soft-close feature is important for a garbage pullout that will be opened many times each day. Controlled opening and closing can help the unit feel more consistent in use. The aluminum frame and verified 150 lb rating also give buyers a concrete reference for the pullout assembly itself. If your project has unusual cabinet construction, heavy door fronts, or special access needs, confirm fit and mounting guidance with the manufacturer documentation before installation.
This revashelf pullout is also a practical choice for buyers planning long-term maintenance. Replacement bins are sold separately, which means the main frame can stay in place if bins wear out or need to be refreshed later. That can be useful in busy family kitchens, shared spaces, or light commercial-style work areas where a trashcan pullout sees frequent use.
When buyers compare cabinet waste systems, the main differences usually come down to mounting style, included bins, motion type, and how much assembly is required. This Rev-A-Shelf trash pullout stands out on verified details that are easy to evaluate before purchase: it is a bottom mount unit, it comes fully assembled, it includes two 50 quart silver bins, and it has built-in door mount brackets. Those facts help buyers compare installation effort and intended use without relying on assumptions.
Another useful comparison point is serviceability. Some cabinet waste systems require buyers to source separate bins later with limited guidance. Here, the product data clearly states that replacement bins are sold separately. That gives a clear path for future upkeep. The same is true for door mount extensions, which are available separately for projects that need them. Instead of assuming every cabinet door setup is the same, buyers can match the base unit to the cabinet and add only what the installation requires.
For installers and serious DIY users, clear verified details often matter more than broad marketing language. A fully assembled frame, four-screw installation, soft-open and soft-close action, and a stated 150 lb rating are practical facts that can support a more confident buying decision. The best approach is to compare those known details against your cabinet opening, mounting surface, and preferred trash-and-recycling workflow.
This Rev-A-Shelf trash pullout fits only cabinets that can accept a 15-5/8 inch unit and the required interior depth, height, and bottom-mount layout. Follow manufacturer installation guidance and local building requirements where applicable.
This pull out trash can is verified as fully assembled, which can reduce installation time compared with units that require frame assembly.
This waste pullout includes two 50 quart silver bins according to the verified product data.
This Rev-A-Shelf waste pullout is a bottom mount unit, so the cabinet floor must be suitable for mounting with four screws.
This Rev-A-Shelf trash pullout has built-in door mount brackets as part of the frame.
Door mount extensions are sold separately, so buyers should confirm their door alignment and spacing before ordering.
The dual-bin pullout can be used for trash and recycling bins if that matches your cabinet workflow and local waste handling setup.
This garbage pullout is rated at 150 lb in the verified product data.
Replacement bins for this Rev-A-Shelf waste pullout are sold separately, which supports later maintenance or bin replacement.
This waste basket pull out requires cabinet opening width, interior depth, interior height, bottom-mount clearance, and door attachment alignment to be confirmed first. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf waste pullout is a practical choice when you need a fully assembled bottom-mount unit with two included 50 quart bins and built-in door mount brackets. Before purchase, confirm that your cabinet can accept the 15-5/8 inch size, that the base is ready for four-screw mounting, and whether optional door mount extensions are needed. Also verify your interior depth, height, and door alignment so the pullout, bins, and soft-close operation match the cabinet correctly from the start.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RSRV-50-LID-17-1 Mfr# RV-50-LID-17-1 | Rev-A-Shelf RV Series 50 quart Silver Trash Bins Lids, 14-3/4"W x 7/8"H x 14-3/4"D - RV-50-LID-17-1 |
