Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Rev-A-Shelf 5349 series pullout fits a single 35 quart white bin behind a base cabinet door on a full-extension, soft-close carriage with an aluminum finish frame.
A waste bin on the cabinet floor gets kicked, knocked over, and fills the kitchen with visual clutter. This pullout moves that bin inside a base cabinet, where it rolls out for access and tucks back out of sight when the door closes. The full-extension slides bring the 35 quart bin completely clear of the cabinet opening, so reaching the bottom of the bin does not require digging past the door frame. Soft-close returns the carriage quietly rather than letting it slam back in. For kitchens where a single trash bin handles daily waste, this is the straightforward solution.
The carriage is finished in aluminum, which pairs naturally with the white bin and sits cleanly inside a cabinet without competing with the surrounding hardware. The unit is designed for bottom-mount installation, fastening to the cabinet floor. Minimum opening requirements are 10-7/8" wide, 19-5/8" tall, and 22-1/8" deep, so this unit fits a relatively narrow base run. The door-mount bracket connects the carriage to the cabinet door, so the pullout moves on the door rather than requiring a separate pull. Replacement bins and door-mount hardware are sold separately if a spare or a different configuration is needed later.
This is the right unit for a kitchen, prep area, or utility cabinet that has one standard waste bin and a base cabinet with at least a 10-7/8" opening. It suits homeowners wanting to clear a visible bin off the floor, designers specifying a clean single-bin setup, and cabinet shops installing waste pullouts across a standard kitchen run. Where two bins are needed for trash and recycling separation, a double-bin carriage is the better starting point. For this footprint and this application, the 5349-15DM-1 handles it cleanly.
The unit requires a minimum opening of 10-7/8" wide, 19-5/8" tall, and 22-1/8" deep. Measure the clear interior opening before ordering.
One 35 quart white bin ships with the unit. Replacement bins and additional door-mount hardware are sold separately.
A door-mount bracket attaches the carriage to the inside of the cabinet door so the pullout extends and retracts as the door opens and closes, without a separate handle pull.
The minimum opening dimensions apply to the clear usable interior. Whether your cabinet is face-frame or frameless, measure the actual clear opening against the 10-7/8" width, 19-5/8" height, and 22-1/8" depth minimums to confirm fit.
The 5349-15DM-1 keeps a 35 quart bin behind the cabinet door on soft-close, full-extension slides, so trash stays out of the room and easy to access when it needs to be.
Sold In: 1 Each
