
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf waste container pullout gives a cabinet a built-in place for one 35 quart waste bin with soft-close full extension slides. This Rev-A-Shelf 5349 Series unit is a bottom mount waste container pullout that comes fully assembled and installs with four screws. The product includes a single silver bin and a carriage with a brushed aluminum finish. For buyers searching RS5349-15DM-117 or RS534915DM18-117, this model is a single 35 quart bottom mount waste container designed for cabinet installation where a pull-out trash setup is preferred over loose wastebaskets. Heavy duty extruded aluminum slides are rated at 100 lb and are designed to reduce side to side play during use.
Key specs to confirm: This Rev-A-Shelf 5349 Series waste container pullout is listed at 10-13/16 inches wide, 19-5/16 inches high, and 18 inches deep in the product description. It is a single 35 quart bottom mount waste container pullout with soft-close full extension slides and a silver bin. Before ordering, confirm your cabinet opening, interior depth, door attachment plan, and any obstruction from hinges, face frames, or plumbing. The slides are rated at 100 lb, but any additional load, safety, compliance, or application limits should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf 5349 Series pull-out frame, one single 35 quart silver waste bin, built-in door mount brackets, and soft-close full extension slides. Replacement bins are sold separately. Door mount extensions are sold separately.
What to verify before ordering: Confirm cabinet interior width, usable depth, height clearance, door mounting needs, and whether door mount extensions are required. Check that the cabinet base can accept a bottom mount waste container pullout and that the 18 inch depth works with your cabinet interior.
A single 35 quart bottom mount waste container is a practical choice when the goal is to keep one waste stream contained inside a cabinet while maintaining easy access. In a kitchen, this type of pull-out helps move the trash bin off the floor and into a fixed location that opens with the cabinet door area. In a vanity cabinet application, it can be used where a compact, enclosed waste setup is preferred and cabinet dimensions allow the listed width, height, and depth.
This Rev-A-Shelf waste container pullout is part of the 5349 Series premium line of trash pull-outs with soft-close. The frame comes fully assembled, which helps installers reduce setup time on site. Because it installs with four screws, the job is more direct than systems that require more frame assembly before mounting. Built-in door mount brackets are part of the frame, which is useful for buyers planning a door-attached pull-out. If the application needs more reach or spacing for the door connection, door mount extensions are sold separately and should be confirmed before ordering.
The heavy duty extruded aluminum soft-close slides are rated at 100 lb and are described by Rev-A-Shelf as eliminating side to side play. For daily use, that means the pull-out is designed for more controlled movement and full access to the bin when extended. The brushed aluminum carriage finish and silver bin give the unit a clean, utility-focused look inside the cabinet.
Buyers searching rev a shelf or revashelf model references often want to know whether this unit is a complete pull-out or just a replacement bin. This listing is for the pull-out assembly with one 35 quart silver bin. Replacement bins are sold separately, which is useful for long-term maintenance. If you are replacing an older unit, confirm your cabinet measurements and compare the listed 10-13/16 inch width, 19-5/16 inch height, and 18 inch depth to the available interior space before ordering.
When comparing wastebaskets to a cabinet-mounted pull-out, the main difference is how the bin is supported and accessed. A loose bin can be moved anywhere, but it does not provide the fixed travel, full extension access, or door-mount capability that many cabinet installations require. A bottom mount waste container pullout is intended for a built-in result where the frame stays aligned to the cabinet base.
This Rev-A-Shelf trash pull-out stands out in practical terms because the verified product details are specific: one 35 quart silver bin, soft-close full extension slides, a fully assembled frame, four-screw installation, built-in door mount brackets, and heavy duty extruded aluminum slides rated at 100 lb. Those details matter when a buyer wants a known configuration instead of piecing together separate parts. The brushed aluminum carriage finish also gives the frame a consistent appearance that fits utility-focused kitchen and bath cabinet interiors.
For buyers comparing options in a similar product type, the most useful checkpoints are not marketing claims but fit and install details. Confirm whether you need a single-bin format, whether 18 inches of cabinet depth is available, and whether the cabinet can accept a bottom-mounted frame. Also confirm whether you need only the pull-out or also future replacement bins and any door mount extensions. That approach helps avoid ordering a unit that fits the application type but not the actual cabinet opening.
Rev-A-Shelf 5349 Series is a single 35 quart bottom mount waste container pullout with one silver bin and soft-close full extension slides.
This waste container pullout is listed at 10-13/16 inches wide, 19-5/16 inches high, and 18 inches deep, so cabinet interior clearance should be confirmed against those dimensions.
The Rev-A-Shelf waste container pullout comes fully assembled, which helps reduce installation time.
This bottom mount waste container pullout installs with four screws. Follow manufacturer installation guidance and local building requirements where applicable.
The Rev-A-Shelf pull-out frame has built-in door mount brackets. Door mount extensions are sold separately.
This model includes one single 35 quart silver waste bin with the pull-out frame.
Replacement bins for the Rev-A-Shelf waste container pullout are sold separately.
This Rev-A-Shelf trash pull-out uses soft-close full extension slides made from heavy duty extruded aluminum.
The replacement check should include cabinet opening size, interior depth, mounting style, door connection needs, and whether your application needs door mount extensions.
The heavy duty extruded aluminum slides on this Rev-A-Shelf unit are rated at 100 lb.
bottom mount waste container pullout is a good fit when you need one enclosed 35 quart bin, a fully assembled frame, and soft-close full extension slides from Rev-A-Shelf. This listing includes the pull-out frame, one silver bin, and built-in door mount brackets. Before purchase, confirm the cabinet interior can accept the listed 10-13/16 inch width, 19-5/16 inch height, and 18 inch depth, and verify whether door mount extensions or replacement bins are also needed for your installation plan.
Sold In: 1 Each