Pro Value Steel Series 3-3/4" (96 mm) Center to Center Satin Nickel Pull, - STTAPERBOW96-SN

Pro Value Series Satin Nickel Pull For Cabinets

Pro Value Series satin nickel pull is a zinc handle from the Steel collection that gives cabinets a consistent satin nickel finish, which helps match existing decorative hardware in kitchens or shops. The pull uses a 3-3/4 inch (96 mm) center to center hole spacing, so it aligns with standard drilling patterns on many cabinet doors and drawers. Its overall length of 4-7/16 inch leaves a slight overhang past the screw holes, which provides a comfortable hand grip across the bow. The tapered bow profile narrows to about 1/4 inch at the top, which creates a slimmer feel while still leaving the main width at 3/8 inch for finger clearance. A projection of 1-1/8 inch stands the pull off the front of the cabinet, giving space for fingers behind the handle during opening and closing.

Key Details That Shape Everyday Cabinet Use

• The satin nickel finish on this pull creates a smooth, contemporary look, which helps maintain visual consistency across multiple cabinets in the same run.
• The 3-3/4 inch (96 mm) center to center dimension sets predictable hole spacing, which simplifies layout when drilling new fronts or aligning with existing bores.
• The 4-7/16 inch overall length gives extra bar beyond the screws, which offers more gripping area for hands when operating heavier drawers or tall doors.
• The 1-1/8 inch projection spaces the pull off the surface, which provides room for fingers to wrap behind the bow without rubbing against the cabinet face.
• The width stepping from 3/8 inch down to about 1/4 inch at the top shapes a tapered profile, which can help the pull feel lighter on smaller doors while still being easy to grab.

Mounting This 96 Mm Center To Center Pull

The 3-3/4 inch (96 mm) center to center measurement defines the distance between the mounting holes, which guides where to drill through the door or drawer front. This fixed spacing supports straight installation runs across banks of drawers, because every pull lines up on a common horizontal. The pull is part of the Steel collection and uses zinc construction, which provides a solid base for threading the 8-32 screws into the handle body. The specified 8-32 x 1 inch screw size matches common cabinet applications, which helps the pull seat properly through typical door and drawer thicknesses. The 1-1/8 inch projection then sets how far the bow stands off the face once mounted, which affects how the handle feels in hand during opening cycles.

Using This Tapered Bow Pull In Real Projects

Where This Satin Nickel Pull Fits Best

This decorative handle from the Pro Value Steel Series works within the Handles and Pulls category, which places it in standard cabinet and furniture applications. The satin nickel finish coordinates with many hinges, knobs, and other satin nickel hardware, which helps keep a uniform appearance on projects that mix several component types. Its 3-3/4 inch (96 mm) center to center dimension fits layouts that follow this common drilling standard, so it can serve on doors and drawers laid out in that size family. The 4-7/16 inch length balances visual scale on both base cabinets and upper doors, which supports consistent sightlines across stacked installations. With a tapered bow narrowing to about 1/4 inch at the top, the pull presents a slimmer look that can suit modern fronts while still leaving enough width at 3/8 inch for comfortable gripping in regular use.

Details That Support Consistent Replacement Work

The manufacturer part number STTAPERBOW96-SN identifies this specific tapered bow satin nickel pull, which helps installers match the same style during service work or future additions. The product is being phased out, and SZARCH96-SN is stated as the closest replacement part number if stock is gone, which provides a defined alternative when maintaining an existing job that used this handle. Knowing the 96 mm center to center spacing guides swap-out work, because it points to other pulls with the same drilling distance when planning replacements. The 1-1/8 inch projection and 4-7/16 inch length offer reference points for visual and functional comparison, which matters when mixing remaining original pulls with the suggested replacement on the same run of cabinets. The zinc material in a satin nickel finish also gives a baseline for matching color and general feel, which supports a coherent appearance when older installations are updated with the named closest replacement.

Common Questions About This Satin Nickel Pull

Choose This Pull Or Its Noted Replacement

This Pro Value Series satin nickel pull combines a 3-3/4 inch (96 mm) center to center layout, tapered bow profile, and 1-1/8 inch projection, which together support comfortable cabinet operation and clean lines. For projects maintaining an existing installation, the STTAPERBOW96-SN part number identifies this exact handle for matching. When stock is no longer available during service work or expansion, the specified closest replacement SZARCH96-SN provides a stated alternative built around the same reference spacing. Select the option that matches project needs for size, finish alignment, and continuity with other satin nickel decorative hardware in the space.