Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson steel bar pull gives you a straightforward cabinet handle built from steel with a satin nickel finish, so it delivers a modern bar profile that suits many shop and jobsite layouts for both cabinets and drawers. The pull has a 96 mm center to center dimension, which sets the mounting hole spacing for drilling jigs and replacement work on doors and drawer fronts. Its overall length of 5-3/8 inches provides hand clearance across typical cabinet front widths, which helps with a consistent grasp on doors and pull-out sections. A projection of 1-1/4 inches stands the handle off the face, which creates finger room while helping panels avoid marring from direct hand contact. The 1/2 inch width creates a balanced feel along the bar, supporting repeatable alignment with surrounding hardware in a run.
The 96 mm center to center measurement on this Berenson bar pull governs where you drill the two mounting holes, which simplifies using templates or jigs set to metric spacing. Its 5-3/8 inch overall length lets you position the pull so the ends land consistently from door or drawer edges, helping keep runs visually aligned. With a 1-1/4 inch projection, the handle stands off enough from the surface to reduce knuckle contact with the cabinet face as you pull. The 1/2 inch width defines the bar profile, so you can match it visually with other straight-line hardware on the same installation. The satin nickel finish works alongside these dimensions to support a unified appearance across doors and drawers where this pull is used.
This Berenson Corporation pull is part of the Bar Pull collection, which means it brings a straight bar form that suits many cabinet and furniture applications where a linear look is preferred. Its 96 mm center to center spacing matches a common metric pattern, so it fits layouts where that dimension is already established on cabinet doors or drawer fronts. Because the pull is made from steel, it adds a solid, weighty feel when operating cabinets, which suits busy work areas that see frequent opening and closing. The satin nickel finish supports installations where a softer metallic tone is needed, helping the hardware sit comfortably against a range of cabinet colors and surface materials. The defined dimensions of length, projection, and width let you coordinate this pull with other handles in the space for a uniform visual line along upper and lower runs.
The 96 mm center to center measurement helps deliver repeatable alignment from one cabinet front to the next, as it ties directly into the distance between the two mounting points. Contractors and shop installers can rely on the 5-3/8 inch overall length to set consistent offsets from panel edges, which keeps the ends of each bar lining up across doors and drawers in a bank. The 1-1/4 inch projection makes space for fingers behind the bar, improving day-to-day operation without crowding the interior of tight walkways near cabinets. Its 1/2 inch width keeps the grip from feeling bulky while still giving enough surface for controlled pulls on heavier drawers. The satin nickel finish works with these physical details by presenting a unified look across all faces where this pull is mounted, which reduces visual distraction and supports clean, continuous hardware lines.
The Berenson steel bar pull has a 96 mm center to center dimension, which sets the spacing between mounting holes for drilling and alignment on cabinet doors or drawers.
The pull has an overall length of 5-3/8 inches, which gives enough span across the cabinet face for a full hand grip and helps proportion the handle on various door and drawer widths.
The 96 mm center to center pull is made from steel, which provides a solid, sturdy bar feel when opening and closing cabinet doors and drawers in regular use.
The 9401-2BPN-P cabinet pull has a satin nickel finish, which offers a soft metallic look that coordinates with other satin nickel cabinet hardware in the same space.
The steel bar pull projects 1-1/4 inches from the cabinet face, creating space behind the handle for fingers while operating doors and drawers.
The bar on this cabinet pull is 1/2 inch wide, providing a defined gripping edge that balances a slim look with comfortable handling on cabinets and drawers.
The Berenson steel bar pull with 96 mm center to center spacing, satin nickel finish, and 5-3/8 inch length offers defined dimensions that support accurate drilling and clean alignment across cabinets and drawers. For cabinet shops and installers needing a straight bar profile with steel construction and a satin nickel appearance, this 9401-2BPN-P pull from Wurth Baer Supply provides a consistent handle choice for coordinated runs.
Sold In: 1 Each
