Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage Five pull gives cabinets a polished chrome grip that matches modern jobs. This zinc pull from the Advantage Plus 6 collection uses a 3-3/4 inch (96 mm) center to center, so hole spacing aligns with common cabinet drilling patterns. The overall 5-1/16 inch length provides a comfortable handhold across drawers and doors, which supports repeatable use on kitchen, bath, or shop casework. A 1-1/16 inch projection sets the pull off the face of the cabinet, leaving working clearance for fingers without crowding tight spaces. The 1/4 inch width keeps the profile slim, which helps this handle sit visually light while still defining a clear gripping edge. Base dimensions of 3/4 inch at each mounting point give the ends a solid footprint against the door or drawer front, which helps distribute pull force over a defined area.
This Berenson 9410-1026-P pull uses a 3-3/4 inch (96 mm) center to center measurement, which sets the exact distance between mounting points for layout on doors and drawers. With a total length of 5-1/16 inch, the handle extends past the bore holes enough to visually anchor itself on typical cabinet rails, which matters when aligning multiple pulls in a row. The 1-1/16 inch projection defines how far the grip stands off the surface, guiding placement on doors near reveals or adjacent cabinets. A 3/4 inch base dimension at each end gives a clear footprint for marking and drilling, helping installers center the pull consistently on stiles or drawer fronts. The 1/4 inch width works with these dimensions to keep the handle streamlined, which supports neat alignment along horizontal or vertical cabinet lines.
This pull belongs to the Advantage Plus 6 collection, tying it to a clear design family for coordinated cabinet runs. The polished chrome finish works on cabinets where a bright, metal accent is part of the design, so the hardware reads as a deliberate detail. Its 3-3/4 inch (96 mm) center to center layout matches common drilling, which lets installers deploy it on framed or frameless cabinets built around that spacing. The 5-1/16 inch overall length suits many standard drawer widths and door rails, giving enough bar length for a steady grip without overwhelming narrower fronts. A 1-1/16 inch projection and 1/4 inch width together keep the handle compact off the face, which is useful on closely spaced doors or banked drawers where hardware clearance matters.
The 3-3/4 inch (96 mm) center to center dimension on this Berenson Contemporary Advantage Five pull allows installers to repeat drilling patterns across an entire project, which supports faster layout and reliable alignment. The 3/4 inch base dimension at each end defines a clear contact area on the cabinet front, helping the pull sit flat against wood or laminate surfaces when tightened. With a 5-1/16 inch overall length, the handle covers the gap between mounting points and provides visual balance across multiple fronts in a row, which matters on long banks of doors or drawers. The 1-1/16 inch projection sets repeatable stand-off distance, so doors and drawers opened side by side feel consistent to the hand. A 1/4 inch width keeps the gripping edge controlled and predictable, which helps users find the same hand position each time.
The Berenson 9410-1026-P pull is 5-1/16 inch long, with 3-3/4 inch (96 mm) center to center, 1-1/16 inch projection, 1/4 inch width, and 3/4 inch base dimensions for layout and alignment.
The 3-3/4 inch (96 mm) center to center spacing aligns with common cabinet drilling patterns, so installers can use consistent bore locations across multiple doors and drawers.
This Berenson pull is made from zinc with a polished chrome finish, providing a solid metal grip and a bright reflective look on cabinet fronts.
The pull has a 1-1/16 inch projection, setting the grip off the cabinet surface to give finger clearance while keeping hardware close to the door or drawer face.
This pull is part of the Advantage Plus 6 collection from Berenson, so it ties into a defined style group for coordinated cabinet hardware layouts.
The Berenson 9410-1026-P pull uses 8-32 x 1 inch screws, giving installers a standard thread and length for mounting through typical cabinet fronts.
The Berenson Contemporary Advantage Five pull in polished chrome pairs zinc construction with a 3-3/4 inch (96 mm) center to center layout, creating a consistent handle option for cabinets built around that drilling. Its 5-1/16 inch overall length, 1-1/16 inch projection, and 1/4 inch width combine into a compact profile that still offers a defined grip point. With 3/4 inch base dimensions and 8-32 x 1 inch screw sizing, this 9410-1026-P pull gives installers clear mounting parameters for repeatable cabinet hardware runs.
Sold In: 1 Each
