Berenson Harmony Series 3-3/4" (95 mm) Center to Center Brushed Nickel Pull, - 9444-1BPN-P

Berenson Harmony Brushed Nickel Pull For Cabinets

Berenson Harmony brushed nickel pull is a zinc die cast cabinet handle designed for projects needing a 3-3/4 inch center to center drill pattern, so it matches common cabinet hole spacing in kitchens and shops. The 4-7/16 inch overall length gives the pull enough hand contact for everyday cabinet or drawer use while still fitting on narrower drawer fronts. A 1-1/8 inch projection sets the pull off the face of the cabinet, creating clearance for fingers when opening heavier fronts. The 11/16 inch width provides a comfortable gripping surface without crowding adjacent hardware. Its brushed nickel finish presents a muted metallic look that works well where a non-gloss appearance is preferred. As part of the Harmony Collection by Berenson Corporation, this pull maintains a consistent style for runs of doors and drawers in the same space.

Key Harmony Series Pull Details That Matter

• The zinc die cast material provides a solid metal pull body that supports routine cabinet and drawer use in residential or shop environments where metal hardware is preferred.
• The brushed nickel finish offers a subdued metallic surface that helps the pull visually coordinate with other brushed nickel components on cabinets and fixtures.
• The 3-3/4 inch center to center dimension matches a widely used mounting pattern, which supports straightforward alignment when setting or updating cabinet fronts.
• The 4-7/16 inch overall length balances grip area and scale, which helps the pull sit proportionally on typical cabinet doors and medium-width drawers.
• The 1-1/8 inch projection creates working finger clearance from the door or drawer face, which supports comfortable opening and closing motions.
• The 11/16 inch width and 9/16 inch base dimensions keep the pull footprint compact, which can be useful on face frames or narrow rail sections.

Installation Dimensions For Harmony Series Cabinet Pull

This Harmony Series cabinet pull uses a 3-3/4 inch center to center spacing, so hole drilling or layout can follow that fixed distance for consistent runs of doors and drawers. With a 4-7/16 inch overall length, the pull extends slightly beyond the hole pattern on each side, helping installers visually center it on typical rail widths. The 1-1/8 inch projection defines how far the handle stands off the surface, which influences both user grip and clearance near adjacent cabinetry. At 11/16 inch width, the pull occupies a modest strip across the front, which matters when working around panel detailing or edge profiles. The 9/16 inch base dimensions at each end help seat the pull neatly on flat mounting areas.

Using The 96mm Center To Center Harmony Pull

Where This Berenson Harmony Pull Fits Best

The 96mm center to center layout of this Berenson Harmony Series pull matches a 3-3/4 inch drilling pattern, so it works wherever that spacing is present on cabinet doors or drawers. Its 4-7/16 inch overall length suits standard face frame and frameless cabinet fronts where a medium-length handle is preferred. The 11/16 inch width allows the pull to sit comfortably on narrow rails without overpowering the profile, which is useful on smaller doors or upper cabinets. A 1-1/8 inch projection from the surface creates room behind the pull, so fingers can wrap around even on thicker door constructions. The brushed nickel finish supports use in projects where other visible components share the same finish family for a unified appearance across the installation.

Details That Support Consistent Cabinet Installations

The 3-3/4 inch center to center spacing on this 9444-1BPN-P pull gives installers a repeatable measurement when laying out multiple doors and drawers, which helps keep handles aligned across long cabinet runs. Because the pull is 4-7/16 inches in overall length, there is predictable overhang beyond the mounting holes, aiding visual centering relative to panel edges or rail widths. The zinc die cast construction provides a uniform casting, supporting consistent feel from one cabinet to the next when several pulls from the Harmony Collection are used. The 9/16 inch base dimensions at each end define the contact area on the door or drawer front, which can help when planning spacing from edges, glass lites, or panel details. Together, these fixed dimensions let installers repeat the same layout and drilling steps across similar projects.

Common Questions About The Harmony Series Pull

Selecting This Harmony Pull For Your Next Run

The Berenson Harmony brushed nickel pull combines a 3-3/4 inch center to center pattern, 4-7/16 inch overall length, and 1-1/8 inch projection, so layout, drilling, and grip all follow known dimensions. Its zinc die cast construction and brushed nickel finish place it squarely in the decorative cabinet hardware range offered by Wurth Baer Supply. For projects using the Harmony Collection or matching brushed nickel components, this 9444-1BPN-P pull provides a consistent size and appearance across cabinet doors and drawers.