Berenson Harmony Series 5-1/16" (128 mm) Center to Center Brushed Nickel Pull, - 9450-1BPN-P
Description
Berenson Harmony 128mm Pull For Cabinets
Berenson Harmony 128mm pull is a brushed nickel cabinet handle designed for installations needing a 5-1/16 inch center to center drill pattern, so it lines up with that common hole spacing on cabinet doors and drawers. The overall 5-11/16 inch length gives the hand a bit of extra grab beyond the screw centers, which helps when pulling heavier drawers. A 1-1/8 inch projection stands the pull off the face of the cabinet, providing finger clearance while keeping the handle close enough to the door for a clean look. The 11/16 inch width creates a compact profile across the front, which matters when working next to other hardware or on narrow rails. Zinc die cast construction provides a solid metal body, giving a consistent feel from one pull to the next across a run of cabinets.
Key Harmony Brushed Nickel Pull Details
- The brushed nickel finish on this pull offers a muted metallic surface, which helps it sit well with many hinge and faucet finishes in the same tone across a kitchen or bath run.
- The 5-1/16 inch (128 mm) center to center dimension matches a widely used boring pattern, so it works wherever that measurement is already laid out on cabinet doors or drawer fronts.
- The 5-11/16 inch overall length extends slightly past the screw locations, giving more gripping area, which is useful on wider drawers or heavier cabinet fronts that need a firm pull.
- The 1-1/8 inch projection spaces the handle off the face of the cabinet, which creates room for fingers to wrap behind the pull without contacting the door surface on everyday openings.
- The 11/16 inch width keeps the pull visually narrow across the front, which helps when placing multiple pulls in close proximity or working on slimmer face frame sections.
- The zinc die cast material used in this handle provides a uniform, cast metal form, supporting consistent sizing and feel across multiple pulls ordered for the same project.
Installation Fit And Mounting Dimensions
This Harmony brushed nickel cabinet pull mounts on 5-1/16 inch center to center holes, so it fits drill layouts based on the 128 mm standard spacing. The screw size is 8-32 x 1 inch, giving a fine-thread machine fastener that works with standard cabinet pull boring in typical door and drawer thicknesses. A base dimension of 9/16 inch at each foot defines how much flat mounting surface is covered, which matters when placing the pull on narrower rails or stile edges. The 1-1/8 inch projection and 11/16 inch width combine to define the clearance envelope off the door, so alignment with adjacent doors and other pulls remains consistent along the run.
Using This Berenson Harmony Handle In Projects
Where This Harmony Pull Fits Best
The Berenson Harmony Series 5-1/16 inch center to center brushed nickel pull is suited to cabinet doors and drawers laid out on the 128 mm boring pattern, so it works on many contemporary cabinet lines using that spacing. Its 5-11/16 inch overall length fits well on medium and larger fronts, giving enough handle span so users can grab with one or both fingers at the center. With an 11/16 inch width, the pull remains compact across the face, which is useful on face frame cabinets where rails can be narrow. The brushed nickel finish aligns visually with other brushed nickel decorative hardware in the same room, simplifying finish coordination across knobs, pulls, and visible hinges.
Details That Support Repeatable Cabinet Results
The defined 5-1/16 inch (128 mm) center to center measurement on this Harmony pull supports repeat boring with templates or jigs, which helps keep hole placement consistent from door to door. The 9/16 inch base dimensions at each mounting foot establish a predictable footprint against the cabinet surface, which helps when lining up pulls relative to rail edges or stile margins. The 1-1/8 inch projection provides a set stand-off that keeps doors and drawers feeling the same when gripped, which is important on long banks of cabinets where any change in feel is noticeable. Zinc die cast construction gives each pull a fixed form around the 11/16 inch width and overall 5-11/16 inch length, which supports visual alignment when several pulls are mounted in a straight line.
Common Questions About Harmony Brushed Nickel Pull
What drilling pattern does this Berenson Harmony pull use?
The Berenson Harmony pull uses a 5-1/16 inch (128 mm) center to center drilling pattern, so it matches layouts based on that widely used cabinet hole spacing.
How long is the Harmony brushed nickel cabinet pull overall?
The Harmony brushed nickel cabinet pull has an overall length of 5-11/16 inches, giving extra handle span beyond the screw centers for a comfortable grip on doors and drawers.
What is the projection of the 9450-1BPN-P cabinet pull?
The 9450-1BPN-P cabinet pull projects 1-1/8 inches from the mounting surface, creating consistent finger clearance behind the handle during everyday cabinet use.
What material is the Berenson Harmony handle made from?
The Berenson Harmony handle is made from zinc die cast material, giving a solid metal body with consistent shape and feel from pull to pull.
What screw size does this cabinet pull use for mounting?
This cabinet pull uses 8-32 x 1 inch screws, so it aligns with standard machine-thread mounting through typical cabinet door and drawer front thicknesses.
How wide is the Berenson Harmony brushed nickel pull?
The Berenson Harmony brushed nickel pull is 11/16 inch wide across the face, giving a slim profile suited to narrower rails and closely spaced hardware layouts.
Selecting This Harmony Pull For Your Cabinets
The Berenson Harmony 128mm pull combines a 5-1/16 inch center to center layout with a 5-11/16 inch overall length, so it suits many standard cabinet drilling patterns. With brushed nickel finish, zinc die cast construction, 1-1/8 inch projection, and 11/16 inch width, it provides a consistent feel and profile across doors and drawers. For projects based on the 128 mm spacing that call for a brushed nickel handle, this Harmony pull offers a matched set of dimensions for a uniform cabinet installation.