Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Fluidic brushed nickel pull is a zinc die cast cabinet handle designed for use where a 3-3/4 inch center to center hole spacing already exists, so it suits many standard cabinet layouts in shops, kitchens, and built-ins. The Brushed Nickel finish on this Fluidic Series pull creates a muted metallic look that works well when you want metal hardware that does not draw glare under task lighting. With an overall length of 4-11/16 inches, this pull provides a comfortable span for fingers, which helps users get a firm grip on doors and drawers. The 1-3/16 inch projection sets the hand away from the cabinet face, giving clearance between knuckles and the surface as the door opens. A width of 13/16 inch offers a stable feel in the hand, which supports steady operation on frequently used fronts. Base dimensions of 7/16 inch at each end keep the contact area compact, which helps when laying out hardware on narrow rails.
This Berenson Fluidic Series pull uses a 3-3/4 inch center to center measurement, which defines the distance between the mounting holes and guides drilling and layout on cabinet faces. The pull length of 4-11/16 inches establishes how far the handle extends across a drawer front or door stile, which matters when balancing hardware visually on smaller or larger panels. With a projection of 1-3/16 inches, the pull stands off the door enough to allow fingers to curl behind the bar, which is important when working with thicker cabinet doors or heavier drawers. The 13/16 inch width influences how much of the rail the pull covers, helping installers evaluate clearance near edge profiles or adjacent hardware. Base dimensions of 7/16 inch at each mounting point define the contact pads on the cabinet surface, which is useful when planning layout near panel grooves or decorative edge details.
This Berenson Fluidic Series 3-3/4 inch center to center pull fits cabinet layouts that follow the 96 mm drilling standard, which is common on many factory and custom installations. The brushed nickel finish coordinates with other brushed nickel Decorative Hardware & Moldings, allowing this pull to sit alongside matching hinges or appliance trims in a run of cabinetry. With an overall length of 4-11/16 inches and a compact 13/16 inch width, the pull adapts well to both doors and drawers, so a shop can standardize across uppers, bases, and vanity cabinets. The zinc die cast construction gives the pull a metal body that suits residential and light commercial cabinetry where daily opening and closing is expected. Base dimensions of 7/16 inch allow the pull to sit neatly on narrow stiles, which is useful on smaller doors or utility cabinets where surface area is limited.
The defined 3-3/4 inch center to center spacing helps installers maintain consistent alignment from cabinet to cabinet, which is critical when hardware needs to line up across banks of drawers. Using the 4-11/16 inch overall length as a reference lets layout crews visualize the proportion of the pull against different drawer heights, which supports more deliberate placement on tall versus shallow fronts. The 1-3/16 inch projection provides predictable knuckle clearance, so designers can rely on the pull standing off the surface enough for comfortable grip in busy kitchen or shop environments. A 13/16 inch width establishes a repeatable front profile that remains the same from one cabinet to the next, which contributes to a uniform look across large installations. The 7/16 inch base dimensions define a small contact patch at each end, giving a clear boundary when aligning the pull with rail edges or decorative profiles for a tidy finished appearance.
The Berenson Fluidic Series pull has a 3-3/4 inch center to center measurement, so it matches cabinets drilled on the 96 mm pattern commonly used for many doors and drawers.
The Berenson 9476-1BPN-P pull measures 4-11/16 inches in overall length, which gives extra grip area beyond the mounting holes on both sides of the handle.
This Fluidic Series cabinet pull is made from zinc die cast material, providing a metal body suitable for regular use on residential and light commercial cabinetry.
This brushed nickel cabinet handle has a projection of 1-3/16 inches, which sets the grip away from the cabinet face to allow fingers to wrap behind the pull.
The Berenson Fluidic Series cabinet pull has a width of 13/16 inch, giving a compact yet usable grip surface that suits both doors and drawers.
The base dimensions at each mounting point are 7/16 inch, so the feet take up a small area on the rail, helpful on narrower cabinet stiles.
The Berenson Fluidic Series 3-3/4 inch center to center brushed nickel pull combines zinc die cast construction, a 4-11/16 inch overall length, and 1-3/16 inch projection to support practical cabinet use. With 13/16 inch width and 7/16 inch base dimensions, it suits both wider drawer fronts and narrow stiles using the common 96 mm drilling pattern. For projects built around brushed nickel Decorative Hardware & Moldings, this pull offers a consistent look and defined dimensions that support clean, repeatable cabinet hardware layouts.
Sold In: 1 Each
