Berenson Fluidic Series 5-1/16" (128 mm) Center to Center Polished Chrome Pull, - 9477-1026-P

Berenson Fluidic Pull 128mm Center To Center Use

Berenson Fluidic pull 128mm center to center defines this handle as a precise fit for layouts calling for a 5-1/16 inch center to center drilling pattern, so cabinets and drawers match existing hole spacing on new or retrofit runs. The Fluidic Series identity ties this pull into Berenson Corporation's coordinated decorative hardware line, which helps keep a consistent style across a project when using other Fluidic pieces. Its 6-1/4 inch overall length gives ample gripping surface, so doors and drawers can be opened with a comfortable hand position in kitchen, bath, or shop cabinets. The pull is made from zinc die cast material, which provides a solid metal feel in use while supporting consistent casting of the Fluidic profile from piece to piece. A polished chrome finish completes the part, giving a bright, reflective surface that coordinates with other polished chrome decorative hardware on the job.

Key Fluidic Pull Details For Cabinet Projects

• The 5-1/16 inch center to center dimension sets the drilling pattern, so installers can align this Berenson Fluidic pull with standard 128 mm layouts across multiple cabinet fronts.
• The 6-1/4 inch length establishes total handle span, which helps with visual proportion on wider drawer fronts and supports a full hand grip during everyday operation.
• The 1-3/16 inch projection defines how far the pull stands off the cabinet face, creating clearance for fingers behind the handle while maintaining a low profile on doors.
• The 13/16 inch width describes the gripping bar size, giving a known contact area for fingers and contributing to the pull's visual weight on face frames or slab fronts.
• The 7/16 inch base dimensions indicate the footprint at each mounting point, which affects how the pull seats against the surface and covers the area around drilled holes.
• The zinc die cast material provides a metal construction for the pull body, supporting consistent shaping of the Fluidic design details across multiple units.

Dimensions That Guide Fluidic Pull Mounting

The specified 5-1/16 inch center to center measurement sets exact hole spacing for mounting, so installers can lay out or reuse drilling patterns with confidence when planning cabinet runs. With a projection of 1-3/16 inch, the pull stands off the door or drawer front enough to allow fingers to wrap behind the bar, which aids everyday gripping while keeping the handle from sticking too far into walkways. The 6-1/4 inch overall length defines how much of the front the pull will span, which helps with positioning on narrow doors versus wider drawers to keep sightlines consistent. A 13/16 inch width and 7/16 inch base dimensions round out the profile, so buyers can visualize how this Fluidic Series pull from Berenson Corporation will sit and look on their specific cabinet faces.

Using This Berenson Fluidic Series Pull In Work

Where This Berenson 9477-1026-P Pull Fits Best

This Berenson 9477-1026-P pull belongs to the Fluidic Collection, so it is suited to projects where that collection's styling is carried across multiple cabinet locations. The 5-1/16 inch, or 128 mm, center to center sizing aligns with common cabinet drilling standards, which supports use on many drawers and doors that are laid out on a metric or inch grid. Its polished chrome finish lets this zinc die cast pull visually coordinate with other polished chrome decorative hardware and moldings in kitchen, bath, or built-in installations. The 6-1/4 inch length gives this Fluidic Series handle a presence that works on a range of cabinet widths, so one part number can be specified across upper, base, and vanity cabinets.

Why These Fluidic Pull Dimensions Support Consistency

The defined 128 mm center to center spacing allows shops or installers to repeat the same drilling program for every handle location, which reduces layout variation from cabinet to cabinet. A projection of 1-3/16 inch balances clearance and profile, so hands have space to pull while fronts remain relatively close to the plane of the hardware. The 13/16 inch width combined with 7/16 inch base dimensions creates a known footprint, which helps align the pull visually with rail heights and stile widths on framed or frameless cabinetry. Because the pull is constructed from zinc die cast material within the Berenson Fluidic Series, each 9477-1026-P unit follows the same shape, supporting uniform appearance wherever this polished chrome handle is specified on the project.

Common Questions About This Fluidic Cabinet Pull

Selecting This Fluidic Pull For Cabinet Runs

The defined 5-1/16 inch center to center measurement, 6-1/4 inch length, and 1-3/16 inch projection give clear layout data for this Berenson Fluidic Series polished chrome pull, so it can be specified confidently for coordinated cabinet runs. With zinc die cast construction, a 13/16 inch width, and 7/16 inch base dimensions, the 9477-1026-P model offers predictable sizing and appearance anywhere the Fluidic Collection look is desired across doors and drawers.