Berenson Puritan Series 3-3/4" (96 mm) Center to Center Verona Bronze Pull, - 9482-10VB-P

Berenson Puritan Pull 96mm Center To Center Use

Berenson Puritan pull 96mm center to center gives cabinets a defined grab point across a 3-3/4 inch span, which supports consistent hand placement on doors and drawers. The pull is part of the Puritan Series, so it follows a coordinated design language that keeps multiple cabinets visually aligned on a project. Its Verona Bronze finish establishes a warm, darker tone on the face of the cabinet, which helps the pull read clearly against many wood and laminate colors. The pull is made from zinc die cast, providing a solid-feeling metal body that keeps the handle stable under repeated opening and closing. Overall length of 4-11/16 inches lets the pull reach slightly beyond the drilled hole spread, giving a balanced look from end to end on a typical cabinet front. A projection of 1-1/8 inches sets the gripping surface off the door face, providing room for fingers between the pull and cabinet.

Key Puritan Series Verona Bronze Pull Details

• The Puritan Series identity ties this pull to other Puritan parts, which helps keep hardware style consistent when multiple pieces are specified across a kitchen or casework run.
• A 3-3/4 inch (96 mm) center to center layout fixes the hole spacing, which simplifies drilling layouts and supports repeatable positioning on face frames or frameless fronts.
• The Verona Bronze finish establishes a specific dark bronze tone, which influences how the pull pairs with hinges, faucets, and other visible metal components on the job.
• Zinc die cast construction forms the pull from metal, which supports a solid, unified shape at the bases and gripping area during normal cabinet use.
• The 4-11/16 inch overall length extends beyond the hole spread, which frames the mounting area visually and can help align with rail or stile dimensions on doors.
• A 1-1/8 inch projection defines how far the pull stands off the cabinet face, which affects hand clearance and how far hardware extends into the room from door and drawer fronts.

Installation Dimensions For 96mm Cabinet Pull

This cabinet pull uses a 3-3/4 inch (96 mm) center to center dimension, which sets the distance between the mounting holes and guides drilling on doors and drawers. The manufacturer identifies screw size as 8-32 x 1 inch, so threaded holes and pilot sizing can be matched to that fastener dimension during installation. Base dimensions of 3/8 inch describe the footprint at each mounting point, which helps when aligning the pull with narrow rails or stile edges. The pull width of 15/16 inch defines the front profile, which affects how much of the cabinet surface is visually covered under and around the handle. Its 4-11/16 inch length and 1-1/8 inch projection combine to establish both the reach across the front and the stand-off from the surface for practical everyday gripping.

Using This Verona Bronze Pull In Cabinet Projects

Where The 3-3/4 Inch Pull Works Best

This 3-3/4 inch center to center pull fits cabinet layouts designed around 96 mm drilling, which are common on many residential and light commercial cabinet lines. Being in the Berenson Puritan Series, the pull fits projects that rely on a consistent family of handles across base, wall, and tall cabinets. The Verona Bronze finish works in hardware schemes that call for a bronze tone, so it can be coordinated with other Verona Bronze decorative hardware on the same job. Its 4-11/16 inch overall length suits cabinet fronts where a moderate handle span is desired, giving enough bar length for a full hand while staying proportionate to typical drawer widths. With a width of 15/16 inch, the pull presents a defined bar on the face of the cabinet without covering a large section of the door or drawer front.

Details That Support Repeatable Cabinet Results

The fixed 96 mm center to center dimension supports jigs or drilling templates built around metric spacing, which helps keep hole locations consistent across multiple fronts. A projection of 1-1/8 inches establishes consistent finger clearance from the door face, so users experience the same grip feel from cabinet to cabinet. Zinc die cast construction creates a single, solid metal form, which maintains alignment between the bases and the gripping section under everyday forces from opening and closing. The 3/8 inch base dimensions give a defined contact area for each mounting point, which helps installers align the pull straight relative to door edges and face lines. The 15/16 inch width and 4-11/16 inch length define the visible footprint, so layout decisions about spacing between adjacent pulls or between pulls and edge details can be planned precisely. With the manufacturer part number 9482-10VB-P, this specific model can be referenced accurately in drawings, cut lists, and reorder documents to keep hardware specifications consistent.

Common Questions About Puritan Series Cabinet Pull

Select This 96mm Pull For Defined Cabinet Layouts

The Berenson Puritan Series 3-3/4 inch (96 mm) center to center pull in Verona Bronze provides a defined drilling pattern, a zinc die cast metal body, and a 4-11/16 inch length that suits many cabinet fronts. With a 1-1/8 inch projection and 15/16 inch width, it establishes predictable hand clearance and visual coverage on doors and drawers. For projects built around Puritan Series styling and 96 mm layouts, this Verona Bronze pull delivers a matched look and consistent dimensions across multiple cabinet locations.