
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Puritan Series pull gives cabinets and drawers a brushed nickel handle that matches modern decorative hardware projects. This zinc die cast pull uses a 5-1/16 inch (128 mm) center to center size, so fastener holes align to that standard spacing on doors and drawers. The 6-1/4 inch overall length gives generous grab area, which helps when opening wider or heavier fronts. A 1-1/8 inch projection keeps fingers clear of the surface, supporting comfortable use on frequently opened cabinets. The 15/16 inch width creates a solid hand-feel, which matters on busy kitchen, bath, or shop installations. Base dimensions of 3/8 inch at each end provide a defined footprint on the face, helping the pull sit visually balanced on rails and stiles. The 9484-1BPN-P part number ties this specific Puritan Series design, finish, and size together for repeatable selection across projects.
This Berenson Puritan Series pull installs using 5-1/16 inch (128 mm) center to center hole spacing, so layout work focuses on accurately marking that horizontal distance. The 6-1/4 inch overall length means the pull overhangs the drilled centers, which helps cover minor placement variations while still keeping the bar visually centered. With a 1-1/8 inch projection, the pull stands off the surface at a comfortable distance, which matters when aligning multiple pulls so they sit parallel to each other on a bank of drawers. The 3/8 inch base dimensions at each end define a compact contact patch, which lets the pull mount cleanly on narrow rails or frame edges. The 9484-1BPN-P designation identifies this exact size and geometry, supporting consistent hole spacing decisions job after job.
This brushed nickel cabinet pull from the Puritan Series fits well on cabinet doors and drawers that match a 5-1/16 inch (128 mm) center to center layout. That fixed spacing lets installers line up multiple pulls along drawer stacks or wall cabinets with consistent alignment. The 6-1/4 inch overall length works on both standard-width doors and medium drawers, giving enough bar length without visually overpowering narrow fronts. Its 1-1/8 inch projection allows use on face frame or frameless cabinets where knuckles need room between the pull and the surface. The 15/16 inch width makes this handle suitable for higher-touch locations like kitchen base cabinets, because the bar feels substantial when gripped repeatedly throughout the day.
The defined 128 mm center to center measurement on this 9484-1BPN-P cabinet pull supports templated drilling, which speeds repetitive layout on multi-cabinet runs and reduces rework. Zinc die cast construction provides a uniform pull body, which helps each installed handle sit flat against the surface when aligned to the 3/8 inch bases. The brushed nickel finish gives the hardware a consistent sheen, which helps banks of doors and drawers read as a matched set under jobsite lighting. A 1-1/8 inch projection keeps every installed pull standing off the face at the same distance, supporting straight sightlines when viewing cabinets from the side. The combination of 6-1/4 inch length and 15/16 inch width produces a repeatable hand-feel, which matters when a project uses this same Puritan Series design across an entire room.
The Berenson Puritan Series pull has a 5-1/16 inch (128 mm) center to center size, which sets the exact hole spacing for doors and drawers using this handle.
The 9484-1BPN-P cabinet pull measures 6-1/4 inches in overall length, giving extra gripping area beyond the 5-1/16 inch fastener spacing.
This brushed nickel cabinet pull has a 1-1/8 inch projection, providing finger clearance between the handle and the cabinet surface during everyday use.
The Puritan Series pull is made from zinc die cast material, creating a solid, consistent handle body for cabinet doors and drawers.
This cabinet pull has a 15/16 inch width and 3/8 inch base dimensions, which define the contact footprint on the cabinet face.
The 9484-1BPN-P cabinet pull uses a brushed nickel finish, giving the hardware a muted nickel appearance that coordinates with similar finishes.
The Berenson Puritan Series 5-1/16 inch (128 mm) center to center brushed nickel pull ties material, finish, and dimensions together for repeatable cabinet hardware layouts. With zinc die cast construction, a 6-1/4 inch overall length, 1-1/8 inch projection, and 15/16 inch width, it supports comfortable grip and clean alignment across doors and drawers. The defined 3/8 inch bases and the 9484-1BPN-P part number give installers a clear reference point when planning multiple pulls on a single job or matching existing Puritan Series hardware. Use this handle wherever a 128 mm center to center pattern and brushed nickel look are required on a project.
Sold In: 1 Each