Berenson Puritan Series Pull For Cabinets

Berenson Puritan Series pull gives you a 5-1/16 inch (128 mm) center to center handle that aligns with common drilling patterns, which helps streamline layout work on cabinet doors and drawers. The pull is made from zinc die cast material, so it provides a solid metal feel that supports everyday cabinet use. Its Verona Bronze finish defines the appearance, giving you a specific bronze tone that can coordinate across a run of cabinets in the same space. Overall length is 6-1/4 inches, so the pull extends visibly past the mounting holes, providing finger room without crowding adjacent hardware locations. A 1-1/8 inch projection sets the hand clearance off the cabinet face, which supports a comfortable grip while keeping the pull close enough to the door for tight spaces. The 15/16 inch width and 3/8 inch base dimensions frame how it will sit visually on the stile or drawer front.

Key Puritan Pull Details For Cabinet Projects

• The 5-1/16 inch (128 mm) center to center dimension matches a standard drilling size, which matters when you are aligning multiple pulls along rows of cabinet doors or drawers.
• The Verona Bronze finish defines the color and surface look, which matters when you want a consistent bronze appearance across matching decorative hardware in a kitchen or bath.
• Zinc die cast construction sets the metal composition, which matters when you need a uniform, cast pull profile that feels solid in hand during normal cabinet operation.
• The 6-1/4 inch overall length fixes how far the pull spans across the front, which matters when balancing reach, visual proportion, and spacing from adjacent edges or neighboring hardware.
• The 1-1/8 inch projection and 15/16 inch width determine hand clearance and contact area, which matters for a comfortable, repeatable grip on frequently used doors and drawers.

Installation Dimensions For Puritan Verona Bronze Pull

This Puritan pull uses a 5-1/16 inch (128 mm) center to center dimension, which sets the exact drilling distance between mounting holes during installation. The specified screw size of 8-32 x 1 inch defines the threaded interface and shank length, which matters when selecting the correct tap size and understanding how the screw engages through typical cabinet door or drawer front thicknesses. With a 3/8 inch base dimension at each end, the pull covers a modest footprint around the mounting holes, which can help visually frame the screw locations on narrow stiles. The 6-1/4 inch overall length and 1-1/8 inch projection describe the envelope of space the pull will occupy, which matters when verifying clearance between adjacent doors, drawer fronts, and surrounding trim.

Using The Puritan Series Pull In Cabinet Work

Where This Verona Bronze Pull Fits Best

The Puritan Series 5-1/16 inch center to center pull fits projects that use a 128 mm drilling pattern, which is common on many cabinet door and drawer layouts. At 6-1/4 inches in total length, the pull spans a useful portion of typical drawer fronts without overwhelming narrower faces, which helps maintain proportional sightlines across a bank of cabinets. The Verona Bronze finish defines a darker bronze look, which can support design schemes that call for warm metallic tones on face-frame or frameless cabinetry. With a 15/16 inch width, the pull presents a visible yet controlled profile on the cabinet face, which is helpful when coordinating it with other handles and pulls in the same room. The zinc die cast material provides a cast metal body, which supports using this pull across multiple high-use doors and drawers in kitchens, baths, or shop cabinetry.

Why These Puritan Pull Specs Support Consistency

The 5-1/16 inch (128 mm) center to center spacing on this Berenson Puritan Series pull supports consistent drilling from cabinet to cabinet, which matters when you are laying out repetitive hardware lines on large runs of casework. The 8-32 x 1 inch screw size standardizes the fastener thread and length, which helps keep fastening methods uniform across doors and drawers that share similar material thicknesses. A 1-1/8 inch projection creates predictable clearance from the cabinet surface, which is important when aligning this pull with neighboring handles or planning for door swing near adjacent obstacles. The 3/8 inch base dimensions at each mounting point define a compact bearing area, which helps the pull seat cleanly on the surface while keeping visual focus on the overall handle profile. Combined with the Verona Bronze finish and zinc die cast construction, these fixed specifications help repeat the same look and feel across an entire installation.

Common Questions About The Puritan Cabinet Pull

Selecting This Verona Bronze Pull For Your Job

The Berenson Puritan Series pull with 5-1/16 inch (128 mm) center to center spacing, Verona Bronze finish, and zinc die cast construction gives you defined dimensions for planning cabinet hardware layouts. Using its 6-1/4 inch length, 1-1/8 inch projection, and 15/16 inch width, you can map clearances, drilling locations, and visual balance across your project so the finished installation matches the intended cabinet design.