
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Puritan Series pull gives a cabinet door or drawer a defined gripping point that supports daily opening and closing. The 5-1/16 inch (128 mm) center to center drilling creates a consistent handle layout across multiple fronts, which helps maintain alignment on longer cabinet runs. The pull length of 6-1/4 inches leaves finger space beyond the screw locations, so hands clear the surface more easily when operating heavier fronts. A projection of 1-1/8 inches holds the hand away from the cabinet face, which can reduce knuckle contact on surrounding doors. The 15/16 inch width provides a comfortable contact area for fingers, supporting repeat use in busy kitchen or shop environments. A base dimension of 3/8 inch at each end concentrates the load at the mounting points, which matters when the pull is used for taller pantry doors or wider drawers.
The 5-1/16 inch (128 mm) center to center measurement gives a fixed drilling spread, which supports clean retrofits where existing holes match this pattern. Using the specified 8-32 x 1 inch screw size ties the pull directly into standard cabinet hardware practice, which can suit common door and drawer thickness ranges. The 3/8 inch base at each end defines the footprint that contacts the cabinet surface, which helps position the pull within rail and stile layouts. With an overall length of 6-1/4 inches, the handle spans enough surface to sit comfortably on typical kitchen, bath, or shop cabinet fronts without crowding edges or neighboring hardware.
This Berenson Puritan Series pull works as a handle on cabinet doors and drawers within the decorative hardware and moldings category, so it fits into projects that call for coordinated handles and pulls. The brushed tin finish places the pull in a metallic palette that can pair with other brushed tin elements, supporting consistent hardware color throughout a room of cabinetry. With a center to center drilling of 5-1/16 inches, the pull fits layouts designed around this common spacing, which often appears on standard base and wall cabinets. The 6-1/4 inch overall length lets the handle reach comfortably across many residential cabinet fronts, offering leverage on both smaller doors and wider drawers. A projection of 1-1/8 inches holds the gripping surface away from the face, which can be helpful when multiple pulls are mounted near each other on adjacent doors.
The specified 128 mm (5-1/16 inch) center to center dimension provides a precise drilling target, which supports the use of jigs or templates for repeat hole spacing across a run of cabinets. Zinc die cast construction gives the pull a uniform form, so each unit in a job presents the same profile and edge geometry once mounted. The 15/16 inch width defines a stable gripping surface, allowing fingers to land in a predictable spot each time the cabinet is opened. The 3/8 inch base dimension at the contact points creates a clear boundary for layout marks on stiles or drawer rails. The 8-32 x 1 inch screw size aligns with a widely used thread and length in cabinet hardware, supporting replacement work where existing threaded holes and general door thickness suit this specification.
The pull has a 5-1/16 inch (128 mm) center to center measurement, which sets the drilling distance between mounting holes for consistent placement across multiple cabinet fronts.
The pull is made from zinc die cast, giving a solid metal body that supports repeated use on cabinet doors and drawers in residential or shop settings.
The brushed tin finish provides a muted metallic look, which helps the pull coordinate with other brushed tin decorative hardware and can soften reflections on cabinet faces.
The pull length is 6-1/4 inches, with a projection of 1-1/8 inches and a width of 15/16 inch, defining how far it spans and stands off from the cabinet surface.
The pull uses 8-32 x 1 inch screws, matching a common cabinet hardware thread and length so it can be mounted into prepared holes on standard doors and drawers.
Each base measures 3/8 inch, defining the footprint that rests on the door or drawer and helping position the pull within rails, stiles, or drawer fronts during layout.
The Berenson Puritan Series pull with 5-1/16 inch (128 mm) center to center spacing and brushed tin finish offers a defined drilling pattern and a consistent visual style for cabinet work. Zinc die cast construction, a 6-1/4 inch overall length, and 1-1/8 inch projection establish how it feels and functions on doors and drawers. For projects needing a coordinated cabinet handle layout built around this 128 mm pattern and brushed tin appearance, this pull aligns the mounting details and aesthetics for straightforward planning.
Sold In: 1 Each