Berenson Puritan Series 3-3/4" (96 mm) Center to Center Polished Nickel Pull, - 9572-1014-P

Berenson Puritan Series Cabinet Pull For Cabinets

Berenson Puritan Series cabinet pull is a zinc die cast handle in a polished nickel finish that gives cabinets a clean, bright look while standing up to everyday use. The 3-3/4 inch (96 mm) center to center dimension sets a consistent hole spacing that works well for standard cabinet layouts and straightforward drilling on shop jigs. Overall length of 4-11/16 inch provides enough hand grip without crowding smaller drawer fronts, which helps on narrow faces. A 1-1/8 inch projection keeps fingers clear of the door surface when opening, reducing fingerprints around the pull area. Width of 15/16 inch provides a comfortable contact surface for repeated use. Base dimensions of 3/8 inch allow the pull to sit neatly on the cabinet face, which helps with tight reveals and clean visual lines on finished work.

Key Puritan Pull Details That Help On The Job

• The zinc die cast material creates a solid-feeling pull that holds its shape under regular cabinet use, which supports long-term performance on frequently opened doors and drawers.
• The polished nickel finish reflects surrounding light for a bright appearance that coordinates with other polished nickel decorative hardware, helping projects maintain a consistent design story.
• The 3-3/4 inch (96 mm) center to center dimension matches a common drilling pattern, which simplifies layout when repeating hole locations across a run of cabinets.
• The 4-11/16 inch overall length gives good leverage for opening heavier drawers, while staying proportional on both wall and base cabinet fronts.
• The 1-1/8 inch projection keeps knuckles away from finished surfaces during operation, supporting cleaner fronts and reducing contact wear on finished cabinet faces.
• The 15/16 inch width provides a stable gripping surface that feels substantial in hand, which can be helpful on larger doors that see regular pulling force.

Installation Dimensions And Mounting Considerations

The 3-3/4 inch (96 mm) center to center mounting dimension gives a fixed drilling distance that works efficiently with commercial cabinet drilling equipment and shop-made jigs. With a 4-11/16 inch overall length, the pull spans enough area to visually center on standard drawer widths, which supports balanced layouts across a bank of drawers. A projection of 1-1/8 inch provides clearance between the cabinet face and the front of the pull, allowing fingers to wrap behind the pull comfortably during operation. The 15/16 inch width and 3/8 inch base dimensions keep the contact area compact on the face of the cabinet, which suits tight rail and stile configurations where space around the mounting area is limited.

Using This Berenson Puritan Pull In Cabinet Work

Where This Puritan 96mm Center To Center Pull Fits

The Puritan Series pull with 3-3/4 inch (96 mm) center to center sizing works well in cabinet projects that follow metric or imperial layout standards, because the dimension ties directly to both 96 mm system drilling and 3-3/4 inch spacing. Its 4-11/16 inch overall length suits both doors and drawers, allowing the same pull style to be used across a full kitchen or casework run for visual continuity. The polished nickel finish pairs with decorative hardware and moldings in similar polished nickel tones, which supports coordinated design across hinges, knobs, and other visible components in the installation area. With 1-1/8 inch projection, the pull creates a comfortable hand gap on typical face frame and frameless cabinets, reducing interference with adjacent fronts when doors or drawers are opened. The 15/16 inch width keeps the pull visually streamlined on narrow rails while still looking substantial on wider fronts, giving flexibility in placement across different cabinet sizes.

Details That Support Repeatable Results And Layout

The defined 3-3/4 inch (96 mm) center to center dimension allows installers to standardize drilling patterns, which speeds production when using templates or boring machines on multiple doors and drawers. Zinc die cast construction provides consistent part dimensions from piece to piece, helping pulls line up evenly when installed in rows. The 3/8 inch base dimensions create a predictable footprint on the cabinet face, which is useful when aligning pulls relative to edges, rails, and stiles during layout. The 4-11/16 inch overall length gives a known reference for centering on drawer fronts, aiding in quick measurement and visual balance. A 1-1/8 inch projection offers a fixed stand-off from the door or drawer surface, so clearance stays uniform from cabinet to cabinet throughout the project. The polished nickel finish presents a smooth, reflective surface that lets light define the pull edges clearly, helping final installations read crisp and finished on site.

Common Questions About The Berenson Puritan Pull

Select This Pull For Consistent Cabinet Layouts

The Berenson Puritan Series 3-3/4 inch (96 mm) center to center polished nickel pull brings together standardized drilling dimensions, zinc die cast construction, and a polished nickel finish for cabinet projects that need consistent layout and coordinated appearance. Its 4-11/16 inch overall length, 1-1/8 inch projection, and 15/16 inch width create practical gripping geometry suited to doors and drawers used every day. For shop runs or onsite upgrades that rely on repeatable hole spacing and a unified hardware look, this Puritan pull provides the defined measurements and finish needed for clean, efficient cabinet work.