Amerock Cyprus Series Golden Champagne 18" (457 mm) Center to Center Appliance Pull, -BP26207BBZ

Amerock Cyprus Appliance Pull For Larger Fronts

Amerock Cyprus appliance pull gives you a substantial handle for appliance fronts and large cabinet doors, using the Cyprus collection design to provide a soft, contemporary look that suits modern installations. The 18 inch center-to-center drilling spreads the load over a wide area, which supports heavier doors and appliance panels in everyday use. The 22 inch overall length creates generous hand clearance along the pull, which helps when opening tall doors or panel-ready appliances while wearing work gloves. The golden champagne finish delivers a warm metallic tone, which coordinates with many current kitchen finishes and helps create a consistent visual line across doors and drawer fronts. The zinc die-cast material provides a solid feel in the hand, which supports confident operation when doors need a firm pull. This Amerock BP26207BBZ part number clearly identifies the exact Cyprus model, which simplifies specifying the same pull across multiple openings on a project.

Key Cyprus 18 Inch Appliance Pull Details

• The 18 inch (457 mm) center-to-center dimension sets accurate drilling locations, which helps installers line up multiple pulls straight across wide cabinet and appliance runs.
• The 22 inch overall length gives extra gripping area, which is useful on tall doors where users may grab the pull at different heights during daily use.
• The 1-11/16 inch projection spaces the pull out from the surface, which provides finger clearance without the handle protruding excessively into walkways.
• The 7/8 inch width offers a slim front profile, which keeps the look clean while still presenting enough surface area for a comfortable grip.
• The 9/16 inch by 7/16 inch base dimensions define the footprint at each mounting point, which helps with layout around stiles, rails, and edge reveals.
• The golden champagne finish sets a consistent color across the pull, which supports coordinated hardware selections with matching Cyprus series pieces.
• The zinc die-cast construction creates a uniform molded body, which supports smooth edges and a finished feel where hands contact the pull.

Installation Layout And Mounting Dimensions

The 18 inch center-to-center measurement on this Cyprus appliance pull provides a clear drilling span, which helps installers position holes accurately on appliance panels and oversized cabinet fronts. The 8-32 x 1 inch screw size specification defines the machine thread and length used with this pull, which guides hole preparation and door thickness planning in the shop. The 1-11/16 inch projection and 7/8 inch width work together to set how far the handle stands off the face and how it presents visually, which matters when aligning this pull with adjacent doors, drawers, and other hardware. The 9/16 inch by 7/16 inch base dimensions at each end show the bearing surface at the mounting points, which is useful when laying out pulls relative to narrow rails or door edges.

Using The Amerock Cyprus Pull In Projects

Where This Cyprus Series Cabinet Pull Fits

The Amerock Cyprus series cabinet pull design provides a soft, contemporary look, which fits well in modern and transitional kitchen or bath layouts where straight lines and smooth profiles are specified. As a decorative hardware piece in the Amerock Cyprus collection, this appliance pull visually aligns with other Cyprus handles and pulls, which helps designers carry one style across both standard doors and appliance fronts. The 18 inch center-to-center span suits larger cabinet doors and panel-ready appliances, which often need a longer pull to look proportionate to the door size. The golden champagne finish delivers a specific warm metallic color, which coordinates with many light and medium cabinetry tones in woodworking projects.

Details That Support Consistent, Repeatable Results

The Amerock Cyprus appliance pull uses a defined 18 inch (457 mm) center-to-center dimension, which lets shops program drilling patterns or jigs once and repeat them across multiple doors. The specified 8-32 x 1 inch screw size gives a standard fastener specification, which streamlines hardware bin stock for installers working across several Cyprus pieces. The 22 inch overall length, combined with a 1-11/16 inch projection, sets a predictable hand clearance zone, which helps maintain uniform ergonomics when aligning this pull with other Amerock Cyprus models on adjacent cabinetry. The zinc die-cast material allows Amerock to form the pull with consistent shape and edge radiuses, which supports a uniform appearance when multiple pulls are mounted in a row. The 9/16 inch by 7/16 inch base dimensions at each end define a repeatable footprint, which helps when aligning pulls with door stile widths and creating even reveals from job to job.

Common Questions About Amerock Cyprus Appliance Pull

Selecting This Cyprus Pull For Your Project

The Amerock Cyprus appliance pull with 18 inch center-to-center spacing brings a defined, repeatable dimension to larger doors and appliance fronts, which supports efficient layout in both shop and field work. The golden champagne finish and 22 inch overall length give designers and installers a clear, consistent hardware option that aligns with the broader Cyprus collection. For projects needing a zinc die-cast appliance pull with these specific dimensions, this Amerock BP26207BBZ part number offers a straightforward, catalog-ready choice.