Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This US Futaba NJ-35D65 series 22 inch full-extension soft-close ball-bearing drawer slide brings damped, controlled closing to the deeper base cabinets and roll-out drawers found in kitchen and bath installations. Sold as a pair with non-handed members, it mounts on the side of the drawer box and cabinet interior.
The 22 inch length is the sweet spot for deeper base cabinets — the drawer or roll-out tray has enough depth to make rear access genuinely useful, and full extension is what turns that depth into usable storage rather than a dark shelf you reach past. In a kitchen, that means every spice jar, mixing bowl, and storage container in a 22 inch drawer is reachable from the front. In a vanity or bath cabinet, the deeper box holds hair tools, cleaning supplies, or linens without hunting. The 100 lb per pair rating means the drawer does not need to be half-empty to move well; load it like it is meant to be loaded.
Steel members with a zinc finish form the backbone of the NJ-35D65 series. The zinc layer provides corrosion resistance suited to the dry, conditioned interiors of residential and light-commercial cabinetry. These are indoor slides — the zinc finish handles humidity from a nearby sink or dishwasher, but they are not rated for wet or washdown environments. The soft-close mechanism is integrated into the slide, not an add-on damper, so there are no secondary parts to install or replace. Ball bearings run in full-length raceways for movement that stays smooth as the drawer wears in over time.
A 22 inch soft-close full-extension slide at 100 lb per pair is a workhorse specification — the kind of slide that covers the majority of standard base-cabinet drawers and roll-outs in a residential kitchen job. The non-handed design means every pair off the shelf is the same, so pulling from stock is fast and there is no risk of ordering the wrong hand. The NJ-35D65 series suits face-frame and frameless cabinets; in face-frame installs, plan for rear mounting brackets to support the back end of the slide, as the frame sets the cabinet side back from the front of the opening. Frameless cabinets take a direct side-mount to the panel.
No — 22 inches is the closed length of the slide. Because this is a full-extension slide, the drawer travels approximately the full slide length, bringing the entire box out to the cabinet face. Slide length and drawer travel are different specs; full extension means the travel approaches the slide length, not that it equals it exactly.
Side-mount ball-bearing slides typically require 1/2 inch of clearance per side between the drawer box and the cabinet interior. Build your box 1 inch narrower than the cabinet opening to leave the correct clearance on each side. Confirm the exact clearance in the installation instructions for this series.
Yes. In a face-frame cabinet, the cabinet side is recessed behind the face frame, so the rear end of the slide needs a rear bracket for support. Rear brackets are sold separately and must be compatible with this slide series.
This slide is sold as a pair — one left and one right member arrive together, which is what you need to complete a single drawer installation.
Yes for dry indoor environments, including bathroom vanities and laundry cabinetry. The zinc finish handles the ambient humidity of a conditioned interior. These slides are not designed for wet, washdown, or outdoor applications.
When the drawer is deep enough to matter, the slide should be good enough to make that depth accessible every time — and a 22 inch full-extension soft-close at 100 lb per pair delivers exactly that, load after load.
Sold In: 10 Pair